Accurate Technology TK100 User manual

GSM/GPRS/GPS TRACKER
USER MANUAL
Thank you for purchasing the tracker. This manual shows how to operate the device
smoothly and correctly. Make sure to read this manual carefully before using this
product. Please note that specification and information are subject to changes without
prior notice in this manual. Any change will be integrated in the latest release.

Contents
◆Quick using................................................................................................................3
◆Installation attentions.................................................................................................3
1Summary.................................................................................................................4
2Main functions........................................................................................................4
3 Specs........................................................................................................................4
4 SIM card installation...................................................................................................4
5 Power Wires connection .............................................................................................5
6 Device Parameter Settings..........................................................................................6
6.1 Initialization......................................................................................................6
6.2 Set password .....................................................................................................7
6.3 Authorization.....................................................................................................7
6.4 Single Locating.................................................................................................7
6.6 Auto continuous track.......................................................................................8
6.7 Voice Surveillance & Two-way calling.............................................................8
6.8 Geo-fence..........................................................................................................9
6.9 Overspeed alarm ...............................................................................................9
6.10 ACC ON alarm..............................................................................................10
6.11 SOS alarm.....................................................................................................10
6.12 Time Zone Setting.........................................................................................10
6.13 Cut oil or circuit............................................................................................10
6.14 Recover oil or circuit ....................................................................................10
6.15 Power failure alarm.......................................................................................11
6.16 Check device setting parameters...................................................................11
6.17 GPRS setting.................................................................................................11
6.18 Device restart ................................................................................................12
6.19 Web platform GPS tracking software ...........................................................12
7 Faults & Solution...............................................................................................13

◆Quick using
1）Proper insert GSM SIM card, connect to power supply 12V/24V, Must
turn on small switch inside SIM card hole.
2）Put device outside, around 45-90s three lights will keep lighting on
stands for device can work normally.
3）Dialing device number, it will hang up and reply tracking message with
valid Long and lat to show location.
4）Track online system need set two SMS as below:
SMS 1: #IP#123456#116.205.4.114#8169#
SMS2: #apn#123456#APN of operator#APN user name#APN password#
◆Installation attentions
NOTE: device front side towards the sky.
Installation: if the windscreen glued by metal thermal insulation layer or
heating layer, it will reduce the GPS receive signal and lead to GPS work
disorder.

1Summary
Working Based on existing GSM/GPRS network and GPS satellites, this
product can locate and monitor any remote targets by SMS or GPRS.
2Main functions
·GSM quad-band frequency;
·Real time tracking by SMS/GPRS;
·Two-way talking function;
·Real time voice monitoring;
·Overspeed alarm/ SOS alarm ;
·ACC anti-theft alarm ;
·Built-in backup battery to realize power failure alarm;
·Cut vehicle oil or circuit.
3 Specs.
Content
Specs.
Dim.
97 mm x 51 mm x 15 mm
Weight
80g
Network
GSM/GPRS/GPS
Band
850/900/1800/1900 Mhz
GPS chip
MT3336
GSM module
MTK6260D
GPS sensitivity
-159dBm
GPS accuracy
10m
Time To First Fix
Cold status 45s-90s
Warm status 50s
Hot status 15s
Work voltage
12V-24V
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +55°C
Humidity
15%--95%
4 SIM card installation
4.1 Preparation
Please insert SIM card before turning the device power switch to on;
The SIM card need open the GPRS function;

Please make sure SIM card with full balance.
4.2 Device light description
Color
Represents
red
power
yellow
GSM signal
green
GPS signal
Note: the three lights must be stable lighting on represent device can
work normally. All lights will turn off after 5 minutes, if you call the
device number, lights will wake up.
5 Power Wires connection
5.1 4P power wire connection as below:
1)4P power red wire connects to vehicle power positive +
2)4P power black wire connects to vehicle power negative -
3)4P power yellow wire connects to oil pump or circuit control wires
4)4P power green wire connects to ACC ignition wire
5)other wires connecting to relative accessories in package.
5.2 Device wiring diagram

6 Device Parameter Settings
6.1 Initialization
Send SMS “#begin#password#” to the tracker, it will reply “begin ok”
and initialize all the settings. (Default password:123456).
For example, send SMS “#begin#123456#”, If succeeded, it will

reply“begin ok”.
6.2 Set password
6.2.1Set Password: Send SMS: “#password#old password#new
password#” to the unit to change the password.
For Example, send SMS: “#password#123456#666888#” to device, it
will reply SMS: “password OK”.
6.2.2 Make sure the new password is in 6 digits arabic numbers, or the
device cannot recognize the password.
6.2.3 Resume original password: send SMS: “#resume#”to the device, it
will reply SMS: “resume password, password is 123456”.
6.3 Authorization
6.3.1 Set authorization: send SMS “#admin#password#cell phone
number#”to set up authorized number, device will reply “admin ok”.
6.3.3 Delete authorization send SMS “#noadmin#password#authorized
number#” to delete the authorized number, device will reply “no admin
ok”.
6.4 Single Locating
6.4.1 If there is no authorized number, any number dials up the device
number, it will report tracking message; if already set authorized number,
then it will not respond when an unauthorized number calls it.
6.4.2 Dialing tracking: make a call to device number, it will hang up and
reply a real-time tracking message as below picture.
6.4.3 SMS tracking: send SMS“#smslink#123456#”, it will reply a
real-time tracking message as below picture.

6.6 Auto continuous track
6.6.1 Unlimited time auto track: Send SMS “#at#time interval#sum#0#”
to the device. For Example, send SMS: “#at#30#sum#0#” to device, 30
means 30 seconds.
6.6.2 Cancellation: Send SMS “#noat#password#” to the device.
6.7 Voice Surveillance & Two-way calling
It need connect external optional siren (or car original siren wire).
6.7.1 Device has 3 modes, the default mode is “tracker”mode (Tracking
status).
6.7.2. Send SMS “#monitor#password#” to the device, and it will reply
“monitor ok!” and switch to “monitor” mode. Then use mobile phone to
dial the device number, it will get though and enter voice listening
function.
6.7.3. Send SMS “#tracker#password#” to the device, it will reply
“tracker ok!” and restore to “track” mode.
6.7.4. Send SMS “#call#password#” to the device, it will reply “call ok!”.
Then use mobile phone to dial the device number, device speaker will
ring, press the SOS button to receive the call so that it can realize
two-way talking function.

6.8 Geo-fence
Set up geo-fence for the unit to restrict its movement within a district.
The device will send message to the authorized number automatically
when it exceed the district.
6.8.1 When the unit stays immobile in a place, send SMS:
“#stockade#password#semidiameter#”to unit to set the restricted
district.
For example, send SMS: “#stockade#123456#3#”, “3” represents 300
meters.In case of breach, it will send SMS “stockade!+Geo-info” to the
authorized number.
6.8.2 Cancel: Send SMS: “#nostockade#password#” to deactivate this
function, it will reply “no stockade ok”.
6.9 Overspeed alarm
6.9.1 Set up: Send SMS:“#speed#password#speed number in 3 digits#”
to the device (suppose the speed is 80km/h), EG, send SMS
“#speed#123456#080#”, and it will reply “speed ok ”. When the car
moves exceeding 80 km/h, the unit will send SMS alert “speed alarm” to
the authorized number.
6.9.2 Cancel: send SMS “#nospeed#password#” to deactivate the
overspeed alarm. It will reply “cancel speed ok”.

6.10 ACC ON alarm
6.10.1 Send SMS"#ACC#ON#" to device to start illegal start alarm
function, when vehicle ignition on, device will reply "ACC!! +IMEI
number+Long&Lat" to the authorized number.
6.10.2 Send SMS"#ACC#OFF#" to device to close the function.
6.11 SOS alarm
When connect external SOS wire, if press the SOS button 3-4 seconds,
device will reply "SOS alarm! +IMEI number+Long&Lat" to authorized
number.
6.12 Time Zone Setting
Remark: UTC+8 is default time zone.
6.12.1 Send SMS “#timezone#password#direction#time zone value in
hours#time zone in munites#”. If set OK, it will reply “time zone ok”.
For example, if in UTC-6, send SMS “#timezone#123456#W#6#00#”. If
in UTC+5.30, send SMS “#timezone#123456#E#5#30#”.
6.13 Cut oil or circuit
Send SMS “#stopoil#password#” to device, it will reply “stop oil
ok”, cut oil successfully.
Send SMS “#stopelec#password#” to device, it will reply “stop
electricity ok”, cut circuit successfully.
6.14 Recover oil or circuit
Send SMS “#supplyoil#password#”to device, it will reply “supply oil
ok”, recover oil successfully.