Action Star HS-41A0-A-EP User manual

INTRODUCTION
HS-41A0-A-EP
The HDMI Switch is with a remote control for easy switching within four digital
video sources. It allows four HDMI devices to one HDMI display that is a convenient
way of arranging the HDMI devices.
In addition, the HDMI SWITCH can help end-user to connect more digital devices
such as DVD player, PS3, Digicam, or Handcam.
FEATURES
zSupports digital video & audio by HDMI standard 1.2a specification
zConnects audio & video to HDMI compatible HDTV, LCD Monitors or Digital
projectors
zSupports 480i, 480P, 720i, 720P, 1080i, 1080P resolution
zSignal Amplification – Extend the interconnect copper cable length up to
15m(50feet)
zFour HDMI Receiver inputs, One HDMI Transmitter, support to UXGA mode.
Operation pixel frequency rage 25MHz to 165MHz
zEasy switching between four digital video sources using IR remote control of the
switch button on the switcher.
zSupports HDCP compliant devices.
Note:
To reach distance of 15m, the cable should have good quality and comply with
HDMI ATC certification.

SPECIFICATION
Function Specification
Model No. HS-41A0-x-EP (4ports)
Input 4 HDMI Female A type
Output 1 x HDMI Female A type
Port Selection Select button or IR Remote
LED Power 1 x Power Red LED
Select 4 x Green Color LED
Frequency Bandwidth 1.65Gbps(single link)
PowerAdapter DC 9V, 500mA
Operation Temperature 25~70 ℃
Storage Temperature -25~125 ℃
Module Weight 350g
Module Dimension (L x W x H) 176mm x 25mm x 82mm
Package contents
1 x HDMI 4x1 Switch
1 x DC 9V, 500mApower adapter
1 x IR remote control
2 x AAAbatteries for remote control
1 x User manual

Installation

User Manual:
Connect the HDMI cables from the HDMI source devices to the HDMI
switch inputs.
Connect the HDMI cable from your display ( monitor or projector ) into
the HDMI switch output.
Plug the 9V DC power supply into the HDMI switch.
Select the desired input as follows:
From the switch front panel –
Press the “Input Select” button repeatedly until the desired input is
selected.
To switch off HDMI switch, press “Input Select” button on HDMI switch
panel for 4 seconds. To switch on, simply press “Input Select” button.
From the remote control –
1. Open remote control cover and the batteries package
2. Install the batteries into the remote control
3. Press the desired input button to go directly to the desired input (1 – 2 –
3 –4 )，or
4. Press the “” or “” button to select the previous / next input.
5. Press the “JUMP” button to get back.