Action Star PK-2UA0-A-EL User manual

INTRODUCTION
PK-2UA0-A-EL
The KVM switch allows a single keyboard, video display monitor, and mouse to be
switched to access multiple computers. The switch provides more table space in addition to
saving the cost of multiple keyboards and monitors.
FEATURES
zAccess multiple PCs with one set of Keyboard, Mouse, Monitor and one port USB 2.0
Device..
zSpace saving and cost effective.
zFront panel LEDs indicate which PC is selected.
zSelect PCs by using front panel SELECT button or Hot Key command.
zAuto Scan Mode sequences through PC.
zSupports SVGA , VGAand multi-sync Monitors, resolutions up to 2048*1536
zThe USB port compliant with USB specification Ver 2.0 (Data Rate 1.5/12/480Mbps).
zCan switch independent KVM and USB device.
zBuzz for switching confirmation.
zWindows 98, Me, 2000, XP, Vista and Linux OS compatible.

SPECIFICATION
Function Specification
Model No. PK-2UA0-A-EL
PC Port 2
Device Port 2 x PS/2 Device
1 x USB Device
Cable Length 1.8 m
PC Port LED Selected 2 x Green Color LED
Cable Connector PC 2 x PS/2 Mini-DIN-6 Male
1 x USB TypeAMale (while)
1 x HDB -15 Male (blue)
KVM 1 x USB TypeAMale (while)
1 x HDB -15 Male (block)
KVM
Connector
Console 2 x HDB-15 Female (block)
2 x USB TypeAFemale (while)
Keyboard 1 x PS/2 Mini-DIN-6 Female
Mouse 1 x PS/2 Mini-DIN-6 Female
USB 1 x USB TypeAFemale (while)
Monitor 1 x HDB-15 Female (blue)
USB Power Bus Power
Module Weight 104.2 g
Module Dimension (L x W x H) 110 x 66 x 22 mm
Emission CE, FCC, C-Tick
PACKAGE CONTENTS
z1 x 2-port PS/2 KVM with USB switch
z1 x User manual
z2 x Cables

Cables included in the box
Cables:
PS/2 cable for keyboard and mouse ports‧
Mini-DIN6 male/male
Standard VGA cable for monitor port‧
HDDB15 male/male with thumbscrews
Mini-DIN6
HDDB 15

Configuration
After installation, you can either choose the “SELECT” button that leads you through
multiple computers or Hot Key controls.
The SELECT button

Keyboard Hot Key Menu:
Press Scroll Lock twice, and you will hear an audible switching confirmation tone to ensure
you are already in the Hot Key Mode (LED is blinking), then Pressing either number 1,
number 2, F1, or F2 to switch from one computer to another.
In the Auto Scan mode, the KVM switch remains on one port for 10 seconds before
switching to the next. Please notice that the mouse and keyboard control will be restricted
in the Auto Scan mode.
P.S: Escape from Hot Key Mode, if you don’t press any buttons after 4 or 5 seconds.
Note:
This KVM Switch will not detect whether a computer is on or off if the “Power On” function
is set in the Bios. Meaning, when you switch to the computer that is turned off, there will be
nothing displayed on the monitor.

Troubleshooting
Keyboard/Mouse
Q: The keyboard/mouse is not detected, error reported, or doesn’t work after boot up.
A:
Shut down the computer.
Check out cable connection and make sure they are attached properly.
Reboot computer.
Call your dealer if there are any wrong, missing, or damaged parts. Keep the carton, including
the original packing materials, to repack the KVM Switch if there is a need to return it for
repair.