ADB 3800W User manual

USB slot
USB slot allows you to
connect external devices.
Getting Started
3800W
Function buttons
Thesebuttonsperformthesame
function as the correspondent
ones on the remote control.
LEDs and Display
The LED indicators inform
you about the status of
your decoder.
Display presents current
time.
Included Accessories
As you unpack your digital decoder, please make sure that the following accessories are included:
Remote control Batteries
Power Adaptor
Rear Panel
1 - Power plug (12V) 6 - HDMI (HD Digital Output)
2 - Output to TV 7 - Component Output (HD Analog Output)
3 - S/PDIF (Digital Audio Output) 8 - S-VIDEO Output
4 - USB port 9 - CVBS VIDEO Output
5 - Ethernet port 10 - RCA Stereo Audio Output
1 2 3
4
5 6 7 8910
*optional
**actual model may vary

Connectivity Diagrams
Power Adaptor
Power Socket
DSL Modem Socket
Home Cinema
TV
Hi-Fi Equipment
SDTV
HDTV
DVD Recorder
DVD Recorder
VCR
VCR
VCR, DVD Recorder connections
As an option you can connect your decoder to your
VCR or DVD Recorder to record programs. Choose
one of the two possible connections.
Note: To record sound you need to connect your DVD
or VCR to the audio output of your decoder using
RCA cable.
Audio connections
Choose one of the three types of audio connections
available.
If you have a Home Cinema you can connect it to your
decoder using S/PDIF connector and an appropriate
cable.
To use your Hi-Fi Equipment you need to connect it to
the audio output of your decoder using RCA cable.
TV connections
Choose one of the available types of connections
of your decoder with the TV set. Keep in mind that
HDMI and YPbPr connectors are for HDTV and other
connectors for SDTV.
Note: RF-connector type applies to TV out. It cannot
be connected to other cable distribution system,
such as cable TV network, satellite dishes, receiving
antennas etc.
Basic connections
These are mandatory connections for each decoder
to operate properly. Connect power supply via Power
Adaptor. Next connect Ethernet port with the DSL
Modem socket using Ethernet cable.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories.
Connect the Ethernet cable
from the Ethernet jack to the Ethernet port on
the back of the STB.
Ethernet Jack