Habland Mx4 Setup guide

1
How to set up Mx4
Menu
1.- Connections ……………………………………………………………………………………..……. 02
2.- Functions necessary ……………………………………………………………………………..…. 02
3.- How to connect to the internet? ………………………………………………....….…..…. 03
3.1.- If you are going to use a cable ………………………………………..…….…... 03
3.2.- If you are not going to use a cable (through wifi) ………….….…….…. 03
4.- Television Reproduction Program ……………………………………………………….…… 04
5.- Restart the system (if it stops responding) ………………………………….…….……… 05
6.- Additional settings of the Reproduction Program ………………………….…………. 06
6.1.- Change playlist url …………………………………..……………….………………… 06
6.2.- Enable / Disable subtitles ………………………………………………..…………… 07
7.- Access to the device by remote control (only in case of incidence) …………... 09
8.- Important notice ………………………………………………………………………………………. 10

2
1.- Connections.
2.- Functions necessary
Return to channel list
Decrease volume
Move to previous channel
Move to next channel
Increase volume
Confirm selection
Undo last change
Turn off and
on device

3
3.- How to connect to the internet?
3.1.- If you are going to use a cable.
From Habland, we always recommend to connect the Android TV device through a
network cable, that way, the connection will be the most stable and there won´t be cuts in the
video. In this case, you will not need to configure anything.
3.2.- If you are not going to use a cable (through Wifi).
If it is not possible by cable, you must follow these steps to connect the device by Wifi
(wirelessly).
•Once the device is started, you will see this menu. We will select Settings
•The typical Android system options menu will appear. In the section Wi-Fi, we activate
the wireless network and select the name of our network in the list. After that, we will
enter the password.

4
4.- Television Reproduction Program.
1. As soon as the device stars, select the IPTV program on the main menu.
2. Once the program is executed, it will load the channel list. With the control cursor, we
will be able to move or select the channels.

5
5.- Restart the system (if it stops responding)
If occasionally, the device stops functioning properly or becomes blocked, we
recommend that you restart the device. To do this, simply unplug the power supply for 5
seconds and plug it back in.
With this, the device will reboot and the main menu will appear again.

6
6.- Additional settings of the Reproduction Program
6.1.- Change playlist url
It is not necessary to change the url of the playlist that is preloaded on the device; but if
it ever was necessary, the steps to follow will be:
- Select the 3 horizontal lines icon.
-We will select More…
-If we press the OK button during 1 or 2 seconds on the remote when we select the
existing list...
-We will see this menu

7
- If we select Edit, we can change the url.
6.2 .- Enable / Disable subtitles
Once the channel is playing, press the OK button on the remote and these two
bands will appear with different options. Select HW in the top right corner.

8
And we change to SW decoder
Working in SW mode, we can select in the top right corner, to enable or disable subtitles.

9
7.- Access to the device by remote control (only in case of incidence)
If you ever need, well because the device does not work properly or you have missed a
program configuration, we have installed a program to access remotely from our office; that
way, we will be able to help you. In this case:
- Select the icon that is marked in the image below (Team Viewer program).
- Once the program is opened, it will indicate a sequence of numbers to be
communicated to a worker in the Habland office. That way, once of us will be able to
connect remotely. Without that number or running the TeamViewer application, we will
not be able to connect.

10
Once we enter that code in the office, you will see a message that someone tries to
access. If you are agree, choose the Allow option.
8.- Important notice
As you will have seen, the Set-Top box that Habland sells to watch its television, works
with Android system (with some modifications).
We strongly recommend that, despite having an applications store to download and
install them, only use the applications that we have previously installed to watch the TV; in order
to get the highest performance and fluency while you watch your programming.
We will not solve related incidents if this has not been fulfilled.