Adexa HHB8705DT User manual

Instruction manual
When using your kettle，basic safety precautions should always be followed，including the
followings：
1．Read all instruction carefully and thoroughly，before any operation of the kettle．
2．Close supervision is necessary when any appliance is used by or near children.
3．Before connecting the kettle ，check whether the voltage indicated on the
appliance(underside of kettle and base unit) corresponds with the mains voltage in your
home．If this is not the case，contact your dealer and not use the kettle.
4．Switch off and unplug from the outlet before filling，emptying or cleaning，or when not in
use．
5．Do not overfill as boiling water may be ejected，the maximum level indicator．Fill with
cold water only．
6．To avoid against fire，do not operated in the presence of explosive and/or flammable
fumes．Such as do not operate or place any party of this appliance on or near gas and
electric burner or in a heated oven．
7．Do not let the cord hang over the edge of a table or a counter．Do not let the cord touch
hot surface．
8．Never yank on the cord as this may damage the cord and eventually cause a risk of
electric shock．
9．If the cord or plug is damaged，or after the appliance malfunctions or is dropped or
damaged in any way，return the appliance completely to your nearest authorized service
agent for examination，repair or adjustment．
10．Avoid touching the surface of the hot kettle，use the handle and knobs．
11．To avoid possible steam damage，not face the spout when operating the kettle．
12．If operated on wood furniture，use a protective pad to prevent damage to delicate
finishes．
13．To avoid scalding，always ensure the lid is correctly positioned before operation．
14．Scalding may occur if the lid is removed while heating．
15．Remove and replace the lid carefully when hot．
16．Extreme caution must be used when moving the kettle containing hot water．Never lift the
kettle by its lid．Always use the body handle.
17．Do not switch your kettle on if it is empty．
18．To protect from electrical hazard，do not immerse this kettle，power base or cord set in
any liquid．
19．Use the kettle only with the supplied base unit．Do not use the base unit for other
purposes．
20．To protect against fire，do not operated in the presence of explosive and/or flammable
fumes．
21．While the water doiling or in the short time after the water boils, please be sure that don’t
attempt to open the cover for avoid the steam scalding your hand．
22．Please avoid the liquid sprinkling in the LCD board and the pressed key place in the
operating process. Because the water possibly can plunge in the product, causes the
function to be unusual．
23．Please do not have to add surpasses the maximum water volume the water, because this
has the possibility to damage the product, causes the product movement to appear

exceptionally．
24．Please regular clean descale or pot bottom residuum, because this possibly can affect the
normal use of the product．
25．If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
26．This appliance should not be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have are supervised by the person who is responsible
for their safety.
Children should be supervised to ensure that they do not play with the appliance
Save the instruction
Instruction for use
1．Before use preparatory work：
（１）．Before first use，fill the kettle with clean water to maximum capacity and boil．Discard
the water and repeat the process．
（２）．The kettle should always be unplugged when filling or adding water．
（３）．Fill the kettle with water to desired level．Do not overfill or there will be a risk of
spillage or spitting．The water level indicator will assist you to measure the correct
amount．You can fill the kettle via the spout or after opening the lid．Do not forget to
close the lid after filling，otherwise the kettle will not automatically switch off after
use．
（４）．Do not fill with less than 0.5 liters of water（to “min”indication）to prevent the kettle
running dry while operating．
（５）．Do not fill with less than 1.7 liters of water（to “max”indication）．
（６）．An automatic safety cut-out has been fitted for protection against overheating，it will
operate if the kettle is switched on when containing insufficient water．Always ensure
the water inside the kettle covers the minimum mark on the water level indicator
gauge．If the automatic safety cut-out has operated，switch the kettle off，disconnect
from the power outlet and allow the kettle to cool down for 5 to 10 minutes．The refill
with and switch on，the kettle will work as normal．
（7）． After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring.
If the kettle is overfilled ,boiling water may be ejected.
The kettle is only to be used with the stand provided.
（8）.This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.

２．Basic operation：
(1).Put the base on the dry , smooth and horizontal plane , insert the plug to the socket .When the
kettle is inserted into the base , the power puts through automatically with the two sound “DI
-DI”and there is word “ON” and than show the present temperature of water on the
display.
(2). Press the “ ” key shortly,with the sound “Di.”,it starts running.
(3). After the water boils,indicator turns off and at the same time
the buzzer sends out a “di-”sound.
３．Advanced operation：
(1) .1 . Press the “ ” key for two seconds with the sound “Di.”, the display show 100℃，it
twinkle two times , and 100℃ is showed on the display .and than twinkle three times ,it show
the present temperature of water on the display.
Quick press key “ ”,the kettle starts running with the function of keep
warm.After water boiled,the LED light changed into red color and twinkle.,the
kettle will keep the water temperature for 2 hours .It will go on heating when the
temperature arrives at 90℃.with such recycles until 2 hours .
(2) . Press the “ ” key for two seconds with the sound “Di.”, the display show 100℃，it
twinkle two times , and 100℃ is showed on the display .and than twinkle three times ,it show
the present temperature of water on the display.
Quick press key “ ”,the kettle starts running with the function of keep
warm.,Press the “ ” key one time,and 40℃ is showed on the display and than
twinkle three times ,it show the present temperature of water on the
display.The LED light is twinkle and when the water reach 40℃,the kettle
will keep the water temperature for 2 hours .It will go on heating when the
temperature arrives at 35℃.with such recycles until 2 hours .Press the “ ” key
two times,and 50℃ is showed on the display and than twinkle three times ,it
show the present temperature of water on the display.The LED light is
twinkle and when the water reach 50℃,the kettle will keep the water temperature
for 2 hours .It will go on heating when the temperature arrives at 45℃.with such
recycles until 2 hours ..Press the “ ” key three times,and 60℃ is showed on
the display and than twinkle three times ,it show the present temperature of
water on the display.The LED light is twinkle and when the water reach

60℃,the kettle will keep the water temperature for 2 hours .It will go on heating when
the temperature arrives at 55℃.with such recycles until 2 hours ..Press the “ ”
key four times,and 70℃ is showed on the display and than twinkle three
times ,it show the present temperature of water on the display.The LED light
is twinkle and when the water reach 70℃,the kettle will keep the water
temperature for 2 hours .It will go on heating when the temperature arrives at
65℃.with such recycles until 2 hours .Press the “ ” key five times,and 80℃
is showed on the display and than twinkle three times ,it show the present
temperature of water on the display.The LED light is twinkle and when the
water reach 80℃,the kettle will keep the water temperature for 2 hours .It will go on
heating when the temperature arrives at 75℃.with such recycles until 2 hours .Press
the “ ” key six times,and 90℃ is showed on the display and than twinkle
three times ,it show the present temperature of water on the display.The LED
light is twinkle and when the water reach 90℃,the kettle will keep the water
temperature for 2 hours .It will go on heating when the temperature arrives at
85℃.with such recycles until 2 hours .
(Note: The kettle can have keep warm function only under above operation way and when
the body left base ,the function will be lost and need reset)
(3) . Press the “ ” key shortly,with the sound “Di”, It show 100℃ on the display, it twinkle
three times than show the present temperature of water on the display.it starts running
to 100℃. Press the “ ” key one time , it show 40℃,it twinkle three times than show the
present temperature of water on the display.it starts running and stopped untill water reach
40℃. Press the “ ” key two times , it show 50℃,it twinkle three times than show the
present temperature of water on the display.it starts running and stopped untill water reach
50℃.Press the “ ” key three time s, it show 60℃,it twinkle three times than show the
present temperature of water on the display.it starts running and stopped untill water reach
60℃. Press the “ ” key four times , it show 70℃,it twinkle three times than show the
present temperature of water on the display.it starts running and stopped untill water reach
70℃. Press the “ ” key five times , it show 80℃,it twinkle three times than show the
present temperature of water on the display.it starts running and stopped untill water reach
80℃. Press the “ ” key six times , it show 90℃,it twinkle three times than show the
present temperature of water on the display.it starts running and stopped untill water reach

90℃.
(NOTE:When kettle under boiling or keep warm condition, the LED light is blue color for water
temperature in the range of 0-50℃,the LED light is light blue for water temperature in the range
of 51-60℃,the LED light is green for water temperature in the range of 61-70℃,the LED light is
yellow for water temperature in the range of 71-80℃,the LED light is purple for water
temperature in the range of 81-90℃,the LED light is red for water temperature in the range of
91-100℃)
4 .After the use finished，please put plug off the power socket．
How to care for your kettle
Wipe the exterior of the kettle with a soft，damp cloth or sponge．Remove stubborn spots with a
cloth moistened with mild liquid detergent．Do not use abrasive scouring pads or powers．
Never immerse the kettle in water or other liquids．
From time to time，depended on the nature of your water supply，a boiled scale deposit is naturally
formed and can be found mostly adhered to the heating element，thus reducing the heating
efficiency．
The amount of boiled scale deposited（and subsequently the need to clean or rescale）largely
depends on the water hardness in your area the frequency with which the kettle is used．
Boiled scale is not harmful to your health．But if poured into your beverage，it can give a powdery
taste to your drink．Therefore，the kettle should be descaled periodically as indicated below．
Descaling
Descale kettle regularly．With normal use：at least twice a year
1．Fill the kettle up to “max” with a mixture of one part ordinary vinegar and two parts
water．Switch on and wait for the appliance to switch off automatically．
2．Let the mixture remain inside the kettle overnight．
3．Discard the mixture the next morning．
4．Fill the kettle with clean water up to “max” mark and boil again．
5．Discard the boiled water to remove any remaining scale and vinegar．
6．Rinse the inside of the kettle with clean water．
POWER:AC 220-240V 50/60Hz 1850-2200W