Air Lift AL-MV10B User manual

ULTRA COOL VENTILATION MASK
User Manual
Please read this guide thoroughly before operating
and keep it handy for reference at all times

Thank you for purchasing this AIRLIFT product. Before operating your new appliance, please read these
instructions carefully.
This user manual contains information for safe use, installation and maintenance of the appliance.
Please keep this user manual in a safe place for future reference. This will ensure safe use and reduce the
risk of injury. Be sure to pass on this manual to new owners of this appliance.
The manufacturer does not accept responsibility for any damages due to not observing these instructions.
TABLE OF CONTENTS
Table of Contents ............................................................................................................................................. P.1
Explanation of Symbols ................................................................................................................................. P.2
Important Safety Instructions ..................................................................................................................... P.3
Before Use
• Introduction .................................................................................................................................................. P.4
• What are included in the packaging ....................................................................................................... P.4
• Parts and Specification .............................................................................................................................. P.4
Installation and Operations
• NEW INSTALLATION ................................................................................................................................... P.5
• REPLACING USED MASK ........................................................................................................................... P.6
Cleaning and Maintenance ............................................................................................................................ P.7
Troubleshooting ................................................................................................................................................ P.8
Contact Us ........................................................................................................................................................... P.9
P.1

Please make sure to read the following safety precautions as they are designed to prevent unexpected
danger and damage.
These safety precautions are divided into two sections, Warning statements and Caution statements.
Explanation of Symbols
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
personal injury, or property damage.
P.2

Important Safety Instructions
WARNING
CAUTION
Failure to follow the instructions laid down in this manual may cause serious injury or death.
• It is important that you follow the instruction as mentioned in this manual.
• This mask is not a medical device nor is it personal protective equipment.
• Do not use the product in a poorly ventilated area where oxygen is not continually supplied.
• It is recommended that this mask be worn on bare skin.
• Masks are not suitable for children under 13 years of age. Children shall not play with the mask.
• Stop using this mask at the first signs of damage.
• If the mask is damaged, please replace it with a new one.
• Clean the mask Filter Cap and retainer after each use.
• Make sure filter is installed before using.
• Do not use the mask to protect against toxic gases and chemical fumes.
• Do not wear the mask on your neck or forehead.
• Avoid touching the part of the mask in contact with your mouth and nose.
• Remove the mask immediately if a skin reaction appears.
• Do not use or charge the product when it is wet. If the product has been submerged, stop using the product.
• Do not use or store firearms, combustibles or inflammables near the product.
• If you experience respiratory discomfort while using the product, discontinue use and consult a physician, if needed.
• This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the product.
• If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, discontinue use immediately
• Repair or immediately replace all wire harness that have become frayed or otherwise damaged. Do not use a wire harness that
shows cracks or abrasion damage along its length or at either end.
• The appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.
• Do not allow foreign substances such as water, coffee, or soft drinks to enter the product.
• Dispose of the packing materials safely so as to keep them out of the reach of children.
• Do not place the product near a car window where it is exposed to direct sunlight or on top of an electric pad or heater.
• Do not place the product near humid areas such as saunas, swimming pools, or bathrooms.
• Do not store the product in a place where there is a lot of salt.
Failure to follow the instructions laid down in this manual may cause minor injury or product damage.
• During use, it is normal to form condensation. It will not affect the use of the mask.
• Do not wear the product in the rain.
• Do not apply excessive impact to the product.
• Do not place obstacles around the air exhaust of the product.
• For the disposable mask, due to the sealed packaging, there may have a slight odor of the raw materials. This odor is harmless to
human health.
• This product is a personal hygiene product. Please do not share it with others.
• Do not rinse the electric fan and immerse the fan in water or other cleaning agents.
• If you experience skin problems while using the product, stop using it and consult a doctor.
Disposing of the rechargeable battery
When disposing the product, make sure that the product is not connected to the battery and that the
battery has completely discharged.
Recycling
This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU).
This product contains a built-in rechargeable battery which shall not be disposed of with normal
household waste. At the end of its service life, it must be disposed of at a collection point for recycling
electrical and electronic devices
P.3

Before Use
Parts and Specification
What are included in the packaging:
• Ultra Cool Ventilator with Filter Cap x1
• Sport Cap x1
• Controller x1
• 2500mAh Power bank x1
• 30cm Cable x1
• Customized disposable mask and filter x5
• Adjustable Lanyard x1
• Quick Start Guide x1
Product Name: AirLift Ventilation Mask
Model: AL - MV10B
Input Power: USB DC 5V 1A
Operation Temperature: 10 – 40 °C
Power Bank Capacity: 2500mAh
Mask and Filter Type: Disposable Mask and Filter
Protection Grade: KN94 Grade Material
P.4

NEW INSTALLATION
1. Take out the new filter from the packaging
2. Release the Filter Retainer from the Filter Cap
3. Place the new filter between Filter Cap and Filter Retainer and press fit the retainer with the Filter Cap
tightly (see. Pic P1)
4. Take out a new disposable mask from the packaging
5. Put the ventilator at new mask outside (see. Pic F2)
6. Fasten (in clockwise) the cap from mask inside through the pre-cut hole in the mask (see. Pic F3)
Note:
• Ensure the product is turned off before fastening the cap.
• Make sure that the filter is installed before using the product.
• Do not use the product with out the filter in place.
7. Insert the lanyard loop through the power bank notch at the corner, then take the lanyard and push it
through the loop, draw the cord all the way through and the lanyard is tied to the power bank. (Do it in
the first time only)
8. Wear the lanyard with the power bank
9. Wear the mask, connect the Controller and Ultra Cool Ventilator with the cable provided.
10. Insert the USB plug of the Controller to the USB socket of the Power bank. (see. Pic F3)
11. Press the button on the controller module to start the ventilator with low speed. (see. Pic F4)
Note: If the product is not assembled correctly, product performance may be affected.
12. Keep pressing the button and the ventilator speed changes as follow:
Note:
• With a fully charged battery, the run time for the product is approximately 7 hours in High, 9.5 hours in Medium,
and 12 hours in Low.
• Run times may vary depending on the condition of the battery and the product.
• The run time of the product will decrease gradually over the useful life of the battery.
• The product ships with the battery not fully charged. Recommended charge the battery fully before using the
product for the first time.
• If you are not going to use the product for an extended period of time, separate the power bank from the product
before storing.
Installation and Operation
P.5

Installation and Operation
REPLACING USED MASK AND FILTER
1. Ensure the power of AIRLIFT mask is turned off when replacing new mask (see. Pic F5)
2. Disconnect the cable from the Ultra Cool Ventilator and uninstall the ventilator in the used mask (see.
Pic F6)
3. Release the Filter Retainer from the Filter Cap and and take out the used filter
4. Discard both used mask and filter in the closed bin (see. Pic F8)
5. Open a new mask and filter , then repeat the steps in “NEW INSTALLATION” (see. Pic F8)
P.6

Cleaning and Maintenance
Ultra Cool Ventilator:
• Turn off the ventilator before cleaning; make sure no power supply is connected
• Wipe the surface with a soft, damp cloth or a wet paper towel.
Note:
- Stains from some cosmetics may be difficult or impossible to remove even if the ventilator is cleaned immediately after use.
- Do not allow waterto get inside the product. Doing so could cause product failure, fire, or electric shock.
Filter Cap and Retainer:
• It’s recommended to hand wash the Filter Cap and Retainer daily.
• Detach the cap from the Ultra Cool Ventilator before cleaning.
• Remove the filter before cleaning
• Wipe the surface using a soft, damp cloth or wash the Filter Cap and Retainer using mild detergent with maximum water
temperature of 40 °C.
• Avoid using abrasive cleansing products or (aggressive) liquid.
• Allow Filter Cap and Retainer to dry before using
Disposable mask and filter:
• It is recommended to change the mask and filter daily to keep good hygiene.
P.7

SymptomsSymptoms Suggested SolutionSuggested Solution
The appliance does not operate.
The battery is discharged or needs to be replaced.
The ambient temperature is too high or too low.
Check the ambient temperature.
Fan is noisy even on the lowest speed.
The Filter Cap may be colgged or installed improperly.
There is foreign material in the Fan, remove it properly.
The power bank does not charge.
The charger and the charing teminal are not connected.
Reconnect the charger to the charging terminal.
There is foreign material on the charging terminal . Clean off
the foreign material with a soft, dry cloth.
The product turns off earlier than
expected. Make sure the Power bank is fully charged.
Abnormal smells emanate from the
products
The Ultra Cool Ventilator is dirty and needs to be cleaned.
The Filter Cap is dirty and need to be cleaned.
The frequency of Filter Cap cleaning depends on the usage
environment.
The LED on controller blinks 2 times
after pressing the button
The cable is not connected properly.
Please check the connection between Ultra Cool Ventilator
and Controller
The LED on controller does not turn on
or blink after pressing the button
Make sure the Power bank is connected with the controller
and it still has power.
P.8

INGENIO TECHNOLOGY CO LTD
30/F, Tower 1 of Enterprise Square 5, 38 Wang Chiu Road, Kowloon Bay, Kln, HK
Email: [e-mail]
©2022 INGENIO TECHNOLOGY CO LTD and AirLift Logo are trademarks licensed for use
by INGENIO TECHNOLOGY CO LTD. and registered in H.K.
www.airliftmask.com
P.9