Airaid 400-602 User manual

1
Parts List
AIR-KIT602PA Aluminum Plate (1)
Installation Instructions
Part Number 400-602
Airaid Spacer For 05-07
Ford 6.0L Powerstroke Diesel
Thank you for purchasing the Airaid Throttle Body Spacer. Please read the instruc-
tion manual carefully before proceeding with the installation. Your Airaid Throttle Body
Spacer was carefully inspected and packaged. Check that no parts are missing, or were
damaged during shipping. If you need any assistance please call 1-800-858-3333 to speak
with a representative in our Customer Service Center before returning the product.
Thank you for selecting AIRAID.
Tools Needed
5/16” socket and wrench
THROTTLE BODY SPACERS FOR VEHICLES LISTED ARE
50 STATE LEGAL. SEE AIRAID.COM FOR CARB STATUS ON
EACH PART FOR A SPECFIC VEHICLE.

2
AIR-I40602B
Rev. 10.27.20
Contact your nearest AIRAID dealer for an AIRAID Intake
System for your car, truck or SUV.
The sound of power...The “whistle” means its working!
1. Disconnect the negative battery cable!
2. Loosen clamp at intake manifold leaving clamp on plastic tube.
3. Slide the plastic tube back and insert spacer into tube.
4. Reinstall the plastic tube making sure the spacer is engaged in manifold while locating and tighten-
ing the hose clamp.
5. When installing the spacer in the intake manifold, face the spacer using the illustration below.
6. Before tightening the intake manifold clamp, be sure that the spacer has engaged both the intake
manifold and plastic intake tube. **The outside diameters of the spacer will fit the inside diame-
ters of the intake manifold and the plastic intake tube.
7. Reconnect negative battery cable. Enjoy!
INTAKE MANIFOLD SPACER PLASTIC TUBE CLAMP ASSEMBLY
PLASTIC INTAKE TUBE
Airaid. 1455 Citrus St. Riverside, CA 92507 [phone] [email protected]m www.airaid.com