Airlink101 AR570W User manual

Quick Installation Guide
Wireless N 150 Router
Model # AR570W
Ver. 2A
Before you begin the installation, please check the items of your package:
•Wireless N 150 Router
•Power Adapter
•Ethernet Cable (Cat.5)
•Setup CD
•Quick Installation Guide
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Installing the Router
Step 1 Insert the Setup CD into your CD-ROM drive.
Section 1
Package Contents

Step 2 Click Next to start the configuration.
Step 3 Connect one end of a network cable to the WAN port of the router
and connect the other end to your DSL/Cable modem.
Step 4 Connect one end of another network cable to the LAN port of the
router and connect the other end to your computer.
Step 5 Power on the Router. It will take about 30 seconds.

Step 6 Make sure POWER, WAN, WLAN, and the LAN port that the
computer is connected to are lit. If not, try the above steps again.
LED Indicators:
Step 7 Enter the Router’s password to log in to the Router. The default
password is “admin”. It is recommended to change the router’s password to
protect it from being accessed by other users. If you do not wish to change
the current password, you can leave New Password and Confirm New
Password blank. Click Next.
LED Light
Status Description
POWER On Router is powered on.
On WPS setup is in progress.
Off Wireless network is switched off.
WLAN
Flashing Wireless network is ready and WPS setup is
not in progress.
On WAN port is connected.
Off WAN port is not connected.
WAN
LNK/ACT
Flashing WAN port is transferring or receiving data.
On LAN port is connected.
Off LAN port is not connected.
LAN 1-4
LNK/ACT
Flashing LAN port is transferring or receiving data.
Step 8 Verify the Internet Connection Type the wizard detected. If it is not
correct, please configure it manually. Click Next.
Note: If you are not sure which Internet Connection Type you use, please
contact your Internet Service Provider for this information.

Step 9 Enter the settings for your Internet Connection Type.
Dynamic IP (Cable Modem users)
Click on Clone to clone the MAC address of your PC to the modem then
click Next.
PPPoE (DSL users)
Enter the user name and password provided by your ISP then click Next.
Step 10 Please wait while the Wizard trying to connect to the Internet. If you
see the window “Internet Connection Succeed”, your router has been
successfully connected to the Internet. Please click Next to configure the
wireless settings.
Step 11 Configure a name for your wireless network. Click Next.

Step 12 Configure the security key for your wireless network. Check Enable
WPA Pre-Share Key. Enter 8 to 63 characters into WPA-Pre-Share Key.
Click Next.
Step 13 Verify the settings you just configured for the Router. Click Finish
to restart the Router.
Congratulations! Your router configuration has been finished.
Connecting to the Router Wirelessly
You must configure your wireless computer in order to establish a wireless
connection to the router. In this section, you can find the instructions of how
to connect to the router wirelessly with your Vista computer. You can also
refer to the manual of your wireless network card regarding how to connect
to a router wirelessly.
Step 1 Click on this icon on the task bar of your desktop, then click on
Wireless networks are available.
Section 2

Step 2 Click on the wireless network you want to connect to and click
Connect.
Step 3 Enter the Security key you configured for the Router (see Step 8 in
Section 2). Click Connect.
Step 4 Click on Close. Now the wireless connection has been established
successfully with the Router.
You should now be able to connect to the Internet wirelessly.
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
Website: www.airlink101.com
*Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data
throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, mix of wireless products used, radio frequency interference (e.g.,
cordless telephones and microwaves) as well as network overhead lower actual data throughput rate.
Compatibility with 802.11n devices from other manufacturers is not guaranteed. Specifications are subject to
change without notice. Photo of product may not reflect actual content. All products and trademarks are the
property of their respective owners. Copyright© 2010 Airlink101®
Section 3