AirLinkWiFi Smurf A Series H.264 User manual

User manual
MyiHome AirLinkWiFi
Smurf A Series H.264
Internet Wireless Camera
NIGHT VISION & REMOTE PAN/TILT ROTATE
User Manual Version 2.0
FCC ID: AMU-A1
CE, R&TTE, ROHS

User manual
Application
1)"Baby monitor"
Sweet BabyiCare
*Watch, Sing, Talk & Hear baby
* Anywhere & Anytime in the world
Warning:
All parents and caregivers to put at least 3 feet between any
video or audio baby monitor cords and a child in a crib
2) Security
MyiHome Real Time Security & Control anytime anywhere
3) Health Care
4) Pet care
5) Farm care
Important Safeguards and Warnings
>Environment：Please place and use IP camera under temperature
between-10~60 degree and humidity less than 90%；Do not use IP
camera in smoky or dusty environment；
>Avoid collision or strong fall. Please insure the IP Camera level
installation in a stable workplace. Please install in ventilated place.
Keep the vent clean. Use within the rating input and output scope.
>Do not touch the lenses of the IP Camera at will. The optimum
focus range has been set as default. If you turn the lens, it may
cause incorrect focus and vague images.
>Do not turn the Pan/Tilt by force for it may cause damage to
internal components of the Pan/Tilt.

User manual
1 Introduction
1.1 Packing List
When you receive internet wireless camera,
Firstly, check model item on product is the same as what you ordered；
Untie the packing and checking the items contained against the following
list;
Wireless IP Camera 1
Wi-Fi Antenna(If support in wireless) 1
DC Power Supply 1
CD 1
Network Cable 1
Mounting bracket 1
NOTE: Contact us immediately in the case of any damaged or
short of contents.
1.2 Product views
I/O PINS: 1 Output (+5V) 2 Output B 3 Alarm input 4 Input (GND)

User manual
Power: Outdoor Output (+12V2A)
1.3 PC System Requirements
System configuration requirements :( Example for view four IP
Camera)
CPU: 2.06GHZ or above Memory: 256M or above
Network Card: 10M or above Display Card: 64M or above memory
Recommendable Operating system: Window2000 or Window XP
or Vista
1.4 Hardware Instruction
Follow the steps below to set up your camera hardware. Make sure to
follow each step carefully to ensure that the camera operates properly
1) Plug the network cable into the camera and then into your Cable/DSL
router.
2) Plug the power adapter into the camera and then into the power
outlet.

User manual
CAUTION: Make sure to only use the power adapter supplied with IP
Camera. Using a non-approved power adapter may damage the camera.
3) The camera takes approximately 30 seconds to start up.
4) When the camera is powered and network cable plug correctly. Its head
will turn around and the Network Indicator LED is blank.
2 Functions
>Real-time surveillance
>Storage
>Compression format
>Backup
>Video playback function
>Network operation function
>Alarm linkage function
>Telecom interface
3 Software installation

User manual
Software installation is the key to the successful use of this product.
1Open the CD, find the software as instruction;
2Double click AirLink CMS setup.exe and install the software as
instruction.
Default IP address ：192.168.1.10 ，subnet mask ：255.255.255.0 ，
gateway：192.168.1.1 default login: “admin” and password blank
For safety sake, when firstly log-in, please go to “Account” to modify user name
and password
3.1 CMS Instructions in Local network
Click CMS icon ->
3.2 Add IP Camera at “System->Device Manager”
3.3 Device manager ->click Add area -> Zone List

User manual
3.4 Zone List -> IP address is your local AP DHCP Client Range:
For Example: Your AP Router IP address is 192.168.1.1, the DHCP range you
can give at 192.168.1.200
3.5 IP Search Click -> Give any word for your Device name
->Select IP Address ->Click ->IP Search after 20 seconds will auto appear
your device IP address

User manual
Please note: User Name default is admin, no Password; Port number should
set at “34567”
Click IP address from top list Click ->Add Device -> OK as below image
3.6 Device Monitor
3.6.1 End a list showed Devices Connect Successful
3.6.2 Monitor can be viewing maximum 64 channels
3.6.3 Right side has PTZ adjusted button and others functions button

User manual
3.7 Record
3.7.1 Recording Storage setting ->Click ->
Auto storage list as below image choose what you wish
3.7.1 Record Plan -> -> given a recording

User manual
schedule
3.7.2 Select cameras list from left side ->Click from Plan Template list add
schedule
3.7.3 Select “Remote Playback”or “Local Playback”