Airspeed MIYOTA JAPAN User manual

MIYOTA JAPAN CHRONOGRAPH GRANDE WITH BIG DATE
SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the normal position.
SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 3:00 AM, the date
may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20 second united up
to maximum of 59 minutes and 59 seconds.
The chronograph 1/20 second hand keeps continuously for 30 seconds after starting, and then
stops at zero position.
CHRONOGRAPH
SECOND HAND
BUTTON A
BUTTON B
MINUTE HAND
CHRONOGRAPH
1/20 SECOND HAND
2ND POSITION
1ST POSITION
NORMAL POSITION
NORMAL SECOND
HAND
CHRONOGRAPH
MINUTE HAND
HOUR HAND
DATE

MIYOTA JAPAN CHRONOGRAPH GRANDE WITH BIG DATE
Measuring time with the stopwatch
1. Press button " A " to start the chronograph.
2. The chronograph can be started and stopped each time button "A" is pressed.
3. Press button "B" to reset the chronograph and chronograph minute and second hands
return to their zero positions.
RESET "A"
"B"
CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand does not return
to the zero position.
1. Pull the crown out to the 2nd position.
2. Press the button "A" once to set the chronograph second hand to the zero position.
3. Press the button "B" once to set the chronograph 1/20 second hand to the zero position.
* The chronograph hands can be advanced rapidly by continuously pressing button "A" or "B"
.
4. Once the hands are set at zero position, reset the time and return the crown
to its normal position.
TIME MEASUREMENT "A"
"A"
STOP