aivituvin AIR 26 User manual

INSTRUCTION
MANUAL
AIR 26
www.aivituvin.com

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’ s instructions as this could void the product
warranty.
01

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
P1 P2
P4
P5
02
4PCS+1spare
M3.0x14mm SCREW
8PCS
M6.0x30mm BOLT
P6
1PCS+1 spare
P3
M3.0x20mm SCREW
1PC
Spanner
6PCS+1 spare
M3.0x10mm SCREW
24PCS+1 spare
M3.0x28mm SCREW

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
03
A B C
DEF
G
2PCS 2PCS
HI
1PC
1PC
4PCS
2PCS
Front panel of small house Back panel of small house Side panels of small house
Roof of small house
1PC
Back panel
Left side panel
Right side panel
1PC
Front panel
2PCS
Casters without brake

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
04
J K L
MNO
1PC
1PC
2PCS 1PC
Plastic tray
Casters with brake
Down layer
Bottom panel
Down PVC cover
P
1PC
QR
1PC
3PCS
Ramp
Upper layer
1PC
Base of bowl
1PC
Seesaw

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
05
S T
1PC
Down PVC cover
U
1PC
Roof supporter
1PC
Roof

PRODUCT ASSEMBLY
01
02
06
Assemble two small houses. Attach Part A,B,C,D by 12XP2 screws.
P2
X8
A
Attach the back panel Part E to side panels Part G & F by 4XP1 screws.
E
F
G
P1X
4
P2
X4
B
C
CD

PRODUCT ASSEMBLY
03
04
07
Attach the front panel Part H by 4XP1 screws.
Attach the casters Part I & J to cage, use the spanner P6 to tighten the
wheels.
H
Ix2
P1X
4
EF
G
Jx2
P6X1

PRODUCT ASSEMBLY
05
08
06
Put the bottom panel Part K into the cage.
Slide in the plastic tray Part L.
L
K

PRODUCT ASSEMBLY
07
09
Put the down layer Part M into the cage, position as show on the picture.
08
①
②Put in the PVC layer Part N.
Attach the ramps Part O by 2XP5 screws each.
M
N
O
O
P5X4

PRODUCT ASSEMBLY
09
10
①
②
Put the upper layer Part P into the cage, position as show on the
picture.
Put the base of bowl Part Q and the seesaw Part R to the cage.
10
①Attach the ramp Part O to upper layer by 2XP5 screws.
Put the upper PVC layer Part S.
Q
S
P
R
O
P5X2
②

PRODUCT ASSEMBLY
11
11
Put the two small houses into the cage.
12
Attach the roof Part T by 2XP4 screws.
T
P4X2

PRODUCT ASSEMBLY
13
12
Attach the roof supporter Part Uby 1XP3 screws.
P3X
1
Finish
U

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.