aivituvin GUT 08 User manual

INSTRUCTION
MANUAL
GUT 08

Please retain these instructions for future reference.
NOTICE
Firmly secure all bolts,screws and knobs before use.
Reconfirm that all bolts,screws,and knobs are secure every 90
days.
Fasten screws loosely during initial assembly. Do not fully
tighten screws until the item is completely assembled.
Do not use or store this item in the proximity of open flame or
flammable/combustible chemicals.
Be aware that some parts are heavy and have sharp edges.
Be aware that moving parts can injure,crush and cut.
If any parts are missing,broken,damaged,or worn,stop using
this product until repairs are made and/or factory replacement
parts are installed.
Do not use this item in a way inconsistent with the
manufacturer’ s instructions as this could void the product
warranty.
01

TOOLS REQUIRED
PHILLIPS
SCREWDRIVER
DRILL
(RECOMMENDED)
2PERSON
ASSEMBLY
APPROXIMATELY
45MIN. ASSEMBLY
HARDWARE
8PCS
P1 P2
P3 P4
P5
02
M6.0x40mm SCREW
M3.5x35mm SCREW
M8.0x50mm KNOBS
M3.5x25mm SCREW
14PCS+1 spare
64PCS+1 spare
2PCS
M3.0x16mm SCREW
24PCS+1 spare
P6
M3.5x45mm SCREW
8PCS+1 spare

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
A B C
DEF
G
4PCS
2PCS 2PCS
03
HI
2PCS
2PCS
2PCS
2PCS
2PCS Frame Panel
Bench Frame Backrest Bench Seat
Canopy Support
Frame Support Triangle Canopy Frame
Side Frame
Rectangle Canopy Frame
3PCS

PARTS
A B C
C1 D E
F
Side panel
1PC
Bottom panel
1PC
Bottom panel
1PC
Asphalt roof
1PC
1PC 1PC 1PC
J K L
M
04
1PC
1PC
Seat Divider Stopper Sand Screen
Canopy
6PCS 6PCS
N
2PCS
Metal Fixator
O
R
3PCS
2PCS
Frame for Storage Bins-
Long Side
Storage Bins
PQ
2PCS
Frame for Storage Bins-
Short Side Divider for Storage Bins
2PCS

PRODUCT ASSEMBLY
01
02
05
①Attach a part B backrest to a part C bench with 6xP5 screws,
three screws per hinge.
①Attach three part J seat dividers to a part C bench seat with
6xP3 screws.
②Repeat on other bench seat.
P3X6
B
Jx3
②Repeat on other bench seat.
Cx2
P5X6
P5X6
P3X
6
Cx2
Jx3
B

PRODUCT ASSEMBLY
03
04
06
P3
X8
Attach part D and part E together by 8xP3 screws on each
side.
Ex2 D
P3
X8
DEx2
E
D
①
Screw part F to Part E by 4xP2 bolts.
②Insert Part F to Part N, then screw from outside by 3xP4.
F
P2X4
P4X3
N

PRODUCT ASSEMBLY
05
06
07
Repeat on other sandbox side.
P4X4
G
①
Put the sand screen inside of the sandbox.
L
P4X4
G
②Screw Part G to Part E from inside by 4xP4 screws on each side.
P2X4
F
P
P4X3
N

PRODUCT ASSEMBLY
07
08
08
Attach two part A bench frames with 8xP3 screws.
Attach two assembled benches with 12xP5 screws, three screws
per hinge.
P5X12
A
A
P3X8

PRODUCT ASSEMBLY
09
10
09
①Repeat attach the part K on the other side.
②Attach two part I to part F canopy support by 1xP1 each side.
Attach three part K stopper with 6xP3 screws, two screws
per stopper.
P3 X6
Kx3
P1X1
P1X1
P3X6
Kx3
Ix2

PRODUCT ASSEMBLY
11
10
Attach three part H to part I with 12xP3 screws.
P3X6
P3X6
Hx3
12
Screw Part Q to Part O by 4xP3, Then Screw Part P & O to complete the
assemble of storage frame by 8xP6.
P6X4
P6X4
P3X4
Qx2
O
O
P
P

PRODUCT ASSEMBLY
13
11
Put in the storage bins.
14
Put the storage bins in the sandbox.
Rx3

PRODUCT ASSEMBLY
15
12
Stick the canopy by the magic sticks.
P.S. The storage bins can put on the side of the sandbox too.
M

WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury,property
damage or loss,whether direct,indirect,or incidental,resulting from the incorrect
attachment,improper use,inadequate miantenance,or neglect of this product.