AKOR MOONPHASE Operating and maintenance manual

User guide and warranty conditions

"Congratulations for your new AKOR watch manufactured in Switzerland"
1/9

INTERNATIONAL GUARANTEE
2/9
All AKOR watches are guaranteed for two years from the date of purchase
indicated on the warranty card.
The movement, hands and dial of the watch are the only components
covered during this warranty period.
These components will be repaired or replaced free of charge in case of
defects in materials or workmanship observed in a normal use setting.
All returns must be previously validated by our customer service.

3/9
The warranty does not cover the following points:
•Damage and malfunctions of the watch observed after the warranty
period.
•Damage and malfunctions of the watch caused by unauthorized
persons or their representatives.
•The bracelet, the sapphire crystal, the crown, the buckle or the battery
of Quartz watches.
•Postage, insurance and other expenses not related to repairs are the
responsibility of the customer.
INTERNATIONAL GUARANTEE

4/9
SETTING
*Un outil correcteur est fourni pour régler le jour et la date.

5/9
When setting the time, pull the crown outward until it clicks into place (I).
Turn the crown clockwise to set the watch to the desired time.
Please do not turn the crown in the opposite direction to not disturb the
moon phase.
After any adjustment, the crown must be returned to the initial position to
ensure the proper functioning and tightness of the watch.
TIME SETTING
!

6/9
When setting the date and day, please use the tool provided at the time of
purchase.
Push in the circular location at the location shown below with the
correction tool.
•(I) Each push right with the tool will advance the date.
•(II) Each push on the left will make it possible to move back the day.
SETTING DAY/DATE
I
II

7/9
When adjusting the moon phase, (I) pull the crown outward until you hear
the first click. Then turn the crown counter-clockwise to center the full
moon on the day shown below.
After any adjustment, the crown must be returned to its original position
to ensure the proper functioning and sealing of the watch.
SETTING MOON PHASE
DATES OF FULL MOONS

8/9
To ensure proper operation over time, please do not expose your watch:
•Sudden / extreme temperature changes (above 60 °C or below 0 °C).
•At intense magnetic fields.
•To harmful products that could damage bracelet, case and seal.
Your watch is equipped with an automatic movement, so it is strongly
recommended to carry out a check every 4 years with our authorized
distributors.
MAINTENANCE

9/9