Alcorn Mcbride RideAmp User manual

RideAmp User’s Guide
May 15, 2020
INTELLIGENT ON-BOARD AMPLIFIER

2
May 7, 2020
TABLE OF CONTENTS
TABLE OF CONTENTS ............................................................................................................... 2
WELCOME!.................................................................................................................................... 4
PRODUCT FEATURES................................................................................................................. 5
AUDIO FEATURES ........................................................................................................................................................... 5
PHYSICAL FEATURES....................................................................................................................................................... 6
TECHNICAL SUPPORT............................................................................................................... 7
GETTING STARTED .................................................................................................................... 8
WIRING AND CONNECTIVITY...................................................................................................................................... 8
NETWORK AUDIO CONFIGURATION ....................................................................................................................... 10
GAIN CONFIGURATION .............................................................................................................................................. 11
HARDWARE INFORMATION .................................................................................................. 12
OVERVIEW ..................................................................................................................................................................... 12
INDICATOR LEDS......................................................................................................................................................... 12
CONNECTORS .............................................................................................................................................................. 15
RIDEPLAYER INTEGRATION .................................................................................................. 18
ENABLING AES67 NETWORK AUDIO INPUT..................................................................... 19
MOUNTING................................................................................................................................. 20
SPECIFICATIONS....................................................................................................................... 21
CONTROL ..................................................................................................................................................................... 21
AUDIO ........................................................................................................................................................................... 21
PHYSICAL ....................................................................................................................................................................... 21
BLOCK DIAGRAM ...................................................................................................................... 22
ACCESSORIES ............................................................................................................................ 23
DEVELOPMENT KIT....................................................................................................................................................... 23
CONNECTOR KIT......................................................................................................................................................... 23
M12 X-CODED ETHERNET CABLE ............................................................................................................................ 23

3
May 7, 2020
M12-TO-RJ45 ETHERNET ADAPTER .......................................................................................................................... 23
POWER SUPPLY ............................................................................................................................................................. 23
PRODUCT PHOTOS .................................................................................................................. 24

4
May 7, 2020
WELCOME!
Congratulations on your shiny new Alcorn McBride RideAmp!
RideAmp has been designed to provide a rugged, flexible, and powerful audio amplifier solution that is purpose-
built for on-board audio applications such as coasters, dark ride vehicles, and parade floats.
For a lack of better options, these applications are often forced to use commercial grade amplifiers that were
designed for automotive or marine applications. There are many unfortunate drawbacks to this approach such as:
1. Consumer-grade Interconnects - Unbalanced analog RCA inputs.
2. Vibration-sensitive Design– No protective coating and no protection for electronic components.
3. No Intelligence – No ability to remotely monitor amplifier health, power status, temperature, etc.
RideAmp changes the game by providing a platform that was designed specifically for this niche application. It is a
rugged solid-state solution that’s designed to endure the high-vibration environments frequently encountered
within ride vehicles. We’ve taken steps like reducing high-mass electronic components, conformal coating circuit
boards, and adding protection to larger components to make it an extremely durable design.
All interconnects offer professional inputs and outputs that are better suited for this type of environment. Captive
Molex connectors with gold-plated pins provide reliable connections for power, speakers, balanced analog audio
inputs, and serial control/monitoring. M12 connectors offer mechanically secure network connections that
provide an all-digital signal path for network audio and reliable access to control/status information.
When one or more RideAmp units are paired with an Alcorn McBride RidePlayer, you have a complete solution
that offers perfectly synchronized audio, DSP, high-power amplification, and comprehensive status monitoring of
the entire on-board audio system.
These products leverage our 35 years of experience in designing products specifically for themed entertainment
applications. In true Alcorn McBride fashion, the solid-state and rugged design of these products will ensure years
of 24/7 maintenance free operation which is essential to zero downtime for attractions. It is our mission to
provide solutions that are suited for the unique demands of themed entertainment applications like theme park
attractions, amusement parks, and museums.

5
May 7, 2020
PRODUCT FEATURES
AUDIO FEATURES
This product features a powerful 4-channel audio amplifier system with professional input options and monitoring.
The audio features are:
• 4-channel High-power Amplification
• Balanced Audio Inputs
• 4x4 AES67/Dante Network Audio Input
• Remote configuration and monitoring via Control Network
• Gain control /w military-grade locking potentiometers
Mode
24VDC
48VDC
Single (4
W
)
250W
350W
Single (8
W
)
135W
190W
Single (16
W
)
68W
95W
Bridged (8
W
)
500W
700W
Bridged (16
W
)
270W
380W

6
May 7, 2020
PHYSICAL FEATURES
This product’s rugged solid-state design enables it to endure the harsh environments of coaster, dark ride, and
applications. It offers flexible mounting options, industrial-grade connectors, DC power input, and a rock-solid
chassis design.
Physical features include:
• Vibration Resistant Design
o Coasters, Dark Rides, Parade Floats, Parking Trams, etc.
• 24-48VDC Power Input /w software monitoring
• Rugged Locking Molex connectors
o Power
o Analog Audio Inputs
• M12 X-Coded Ethernet Connectors
o AES67/Dante Network Audio
o Control and Status Monitoring
• Dimensions – 10.6”L x 8.9”W x 4.4”H – Surface Mount
o Compatible with JL Audio MHD600/4 Mounting Points
• Weight – 10.3lbs

7
May 7, 2020
TECHNICAL SUPPORT
Now that we’ve tantalized you with all of the wonderful things this product can do, I’ll bet you’re chomping at the
bit to flip all the switches and push all the buttons. Not so fast! Before we get to the fun stuff, we just want to
take a moment to remind you that we are here to help. Chances are that you’re building something really cool
and we want you to have access to the resources and support you need to be successful.
To start, you’ll find a wealth of information on our website. This includes Application Notes that give you detailed
documentation and examples for how this product is used in common types of themed entertainment projects.
You’ll also find the latest downloads for software, firmware, drawings, 3D models, cutsheets, and other helpful
resources on our Support page. The Knowledge Base is especially handy for common questions and helpful
troubleshooting tips. And last, but certainly not least, you always have our friendly and mildly entertaining staff
available by email or telephone.
Application Notes
http://www.alcorn.com/applications
Support Resources
http://www.alcorn.com/support
Knowledge Base (FAQ)
https://alcornmcbride.zendesk.com/hc/en-us
Email Support
[email protected]
Telephone Support
[phone] (Mon-Fri 9am-6pm EST)

8
May 7, 2020
GETTING STARTED
Alright, time to roll up your sleeves and get to work! This section will guide you through basic concepts that will
help you get on your way with RideAmp.
WIRING AND CONNECTIVITY
A few connections are required to experience the core functionality of RideAmp. If you’re the DIY-type that’s
comfortable with purchasing and crimping your own connectors and pins, you’ll be happy to know that this
product uses industry-standard connectors which are documented in detail in the Hardware Information
section of this User’s Guide. For those looking for the path of least resistance, we strongly encourage you to
order a RideAmp-350Q Development Kit covered in the Accessories section of this document. This kit provides
a full set of pre-fabricated connectors and a power supply, so you spend less time crimping and get right to bench
testing your RideAmp-350Q.
POWER
Our engineers are working around the clock to eliminate the need for those pesky
Electrons. However, until they inevitably succeed, RideAmp needs power to work
properly.
You’ll want to start by connecting RideAmp’s power input to a 48VDC or 24VDC
power source like a battery, super-capacitor, or power supply. To get the most
power out of this product, we recommend a 48VDC/20A power source.

9
May 7, 2020
AUDIO INPUTS
The network audio inputs are the best way to feed audio into
the RideAmp, which means it needs to be connected to the
same network as a device that can source network audio.
RidePlayer is the designed to be the ideal audio source for
RideAmp. You can easily interface them without any network
switch hardware by connecting a standard M12 X-Code patch
cable between the Primary network audio port of RidePlayer
to network port A of RideAmp. Other audio source options
could be your computer (using Dante Virtual Sound Card) or
a DSP core. Either way, the concept is the same; RideAmp
needs to be connected to the same audio network as the
source device.
In addition to the physical network connection, Dante and
AES67 network audio need to be configured for audio to
route properly from RidePlayer to RideAmp. We’ll cover the
details of that in a little bit but, for now, you will need to connect your computer to the audio network as well.
This should be done by connecting an RJ45àM12 X-Coded cable or adapter between your computer and the
Secondary port of RidePlayer.
SPEAKER OUTPUTS
To make great sound, we’re going to have to move some air! For this, we
recommend at least one 4Wor 8Wunpowered speaker. Keep in mind that
the RideAmp-350Q can output up to 350W of power from a single unbridged
output, so choose your speaker wisely or you might accidentally let the
smoke out of it!
The next step is pretty simple. Connect the positive (+) terminal of Speaker
Output 1 to the positive (+) input of the speaker. Connect the negative (-)
terminal of Speaker Output 1 to the (-) terminal of the speaker. Rinse and
repeat for any other speakers that you wish to connect.
You’ll need to terminate these connections into a Molex Mini-Fit Jr.
connector, so be sure to check out the Hardware Information section
later on in this User’s Guide for pinout and part information.

10
May 7, 2020
NETWORK AUDIO CONFIGURATION
RideAmp-350Q supports the industry-standard Dante and AES67 protocols for audio distribution. If you’ve used
other devices based on these standards, setting up the audio inputs of this amplifier will be a piece of cake.
All Alcorn McBride devices that support Dante are shipped with DHCP mode enabled by default. However, it’s
strongly recommended to assign a static IP address to each device to prevent to avoid addressing issues the next
time the amplifier is powered up.
Whether you use DHCP or static IP addresses, the goal is to get all of your devices on the same subnet so that
they can interface to one another. Once this is taken care of, you can follow these steps to patch RidePlayer (or
another network audio transmitter) to the RideAmp-350Q.
1. Launch the Dante Controller application on your Windows or OS X computer.
2. Click on Device Info to view the current IP address, firmware version, and link speed. If their IP
addresses are configured properly, you should see both the RidePlayer and RideAmp in this list.
3. Click on Routing tab to make your first audio patch or subscription. Remember the Rideamp-350Q is
capable of receiving 4 audio inputs. Let’s go ahead and patch the 4 audio inputs of RideAmp to the first 4
audio outputs of RidePlayer by clicking the grid intersection of these items.
4. You’re good to go! Both the RidePlayer and RideAmp will retain these settings from now on.

11
May 7, 2020
GAIN CONFIGURATION
RideAmp ships from the factory with the gain knobs in a calibrated testing position. If you are using low-powered
speakers or working alongside irritable co-workers, you may take this opportunity to turn down the gain if you
wish.
RideAmp used industrial-grade locking potentiometers. To adjust the gain, you must first loosen the lock nut.
Once loosened, gain can be adjusted with a small flat-tip screwdriver; clockwise to increase, counter-clockwise to
decrease. The potentiometers have a built-in mechanical stop that kick in once you reach the minimum and
maximum gain values.
Just make sure you tighten down the lock nut before you install RideAmp on a vehicle, ok?

12
May 7, 2020
HARDWARE INFORMATION
OVERVIEW
RideAmp has quite an assortment of dedicated hardware for the purpose of configuration, status monitoring, and
interfacing to other hardware. This section covers these features in more detail.
INDICATOR LEDS
The top panel of RideAmp has a full set of indicator LEDs to provide an overall status of
different features of the device. This includes power, network, audio signal, and
amplifier status. Read on for details on the functionality of each LED.
POWER
LED State
Description
OFF
No Power
BLUE
DC Power Applied

13
May 7, 2020
NETWORK
These indicators display both network link and activity for all of the Network Audio ethernet ports.
LED State
Description
OFF
No network link
SOLID ORANGE
Network link active – No network activity detected
BLINKING ORANGE
Network link active – Network activity detected
AUDIO
These indicators display the signal activity for all 4 audio inputs as well as the mute status.
LED State
Description
OFF
No audio signal – Audio output enabled
GREEN
Active audio signal
RED
Audio output is MUTED

14
May 7, 2020
STATUS
These indicators display the operational status of each amplifier channel.
LED State
Description
OFF
Amplifier Off/Inactive
GREEN
Amplifier READY
RED
Amplifier FAULT – Clipping, thermal warning, and/or protect

15
May 7, 2020
CONNECTORS
SPEAKER OUTPUTS
This is where you connect speakers to the RideAmp. You can wire up to 4 discrete channels of speakers at 350W
each, or you can bridge each channel pair to achieve 700W.
Connector Information
Pinouts
Connector Type
2x4 Molex Mini-Fit Jr.
Mating Connector
Molex 0039012080
Mating Pins
Molex 0039000185
Recommended Wire
16 AWG Stranded
Speakers (Standard)
Speakers (Bridged)
SPK 1 (+)
1
SPK 1/2 (+)
1
SPK 1 (-)
5
SPK 1/2 (-)
6
SPK 2 (+)
2
SPK 3/4 (+)
3
SPK 2 (-)
6
SPK 3/4 (-)
8
SPK 3 (+)
3
SPK 3 (-)
7
SPK 4 (+)
4
SPK 4 (-)
8
Plug Layout (Wire-Side View)
NOTE: Pay close attention to the key position! This plug gets
rotated 180 ° when it is inserted into the RideAmp unit.

16
May 7, 2020
BALANCED ANALOG INPUTS
These are balanced analog audio inputs that can be used to drive the amplifier channels. Note that these inputs
are simultaneously active along with the network audio inputs.
Connector Information
Connector Type
2x6 Molex Mini-Fit Jr.
Mating Connector
Molex 0039012120
Mating Pins
Molex 0039000073
Recommended Wire
18 AWG Stranded/Shielded
Pinouts
Audio Inputs
IN 1 (+)
1
IN 1 (-)
7
IN 1 (S)
2
IN 2 (+)
3
IN 2 (-)
9
IN 2 (S)
8
IN 3 (+)
4
IN 3 (-)
10
IN 3 (S)
5
IN 4 (+)
6
IN 4 (-)
12
IN 4 (S)
11
Plug Layout (Wire-Side View)
NOTE: Pay close attention to the key position! This plug gets
rotated 180 ° when it is inserted into the RideAmp unit.

17
May 7, 2020
NETWORK
The RideAmp provides a total of two M12 X-Coded network ports. These ports are devoted to a 4x0 network
audio interface that supports the AES67 and Dante standards. When using Dante, these ports also pass back
important status information via the network link to RidePlayer for monitoring amplifier health.
Two connectors are provided for each of these network connections to allow multiple RideAmp units to be daisy-
chained without the need for an external M12 Ethernet switch.
Note that these audio inputs are simultaneously active along with the balanced analog inputs.
POWER
RideAmp is designed to accept either a 24VDC or 48VDC power source. Two inline automotive blade fuses
(20A/80V) are accessible on the RideAmp side panel. Voltage levels are electronically monitored, and low voltage
conditions can be reported back via the network audio connection to RidePlayer.
Connector Information
Connector Type
Molex Mini-Fit Sr.
Mating Connector
Molex 0428160212
Mating Pins
Molex 0428150012
Recommended Wire
8 AWG Stranded
Pinouts
Analog In
DC (-)
1
DC (+)
2

18
May 7, 2020
RIDEPLAYER INTEGRATION
RideAmp serves as a natural extension to the Alcorn McBride RidePlayer. RidePlayer easily handles the
complexities of synchronizing on-board audio playback while RideAmp units greatly enhance its amplification
capabilities. The dual AES67/Dante network audio interfaces allow you to daisy-chain up to 8 RideAmp units while
maintaining an all-digital signal path with rugged M12 connections. These network connections also allow you to
remotely control and monitor the RideAmp units via RidePlayer.
For more information about RidePlayer or RideAmp, please visit our website at www.alcorn.com.

19
May 7, 2020
ENABLING AES67 NETWORK AUDIO INPUT
The default mode of the network audio interface is Dante, however it is very easy to enable the use of AES67
using the Dante Controller application.
You can follow these steps to configure RideAmp to accept AES67 inputs:
1. Launch Dante Controller
2. Click on the “Device info” tab and double click on the RideAmp.
3. Click on the AES67 Configtab, enable AES67 using the box shown below, and then click Reboot.
4. Congratulations! Your RideAmp-350Q can now be configured to receive incoming AES67 flows!

20
May 7, 2020
MOUNTING
RideAmp is designed to be flush mounted to a flat surface. The drawing below indicates the position of the various
mount points:
For more precise measurements and mounting hole locations, drawings and models are available in the Downloads
section of the RideAmp-350Q web page at www.alcorn.com.