
GB1380 User Manual
70-0042A-A
AVT Inc.
2
Specifications
Sensor Type Sony ICX285AL CCD (ICX285AQ for color)
Sensor Shutter Type Progressive Interline
Image Resolution 1360 x 1024 pixels
Pixel Size 6.45µm x 6.45µm
Optical Format 2/3 inch
Lens Mount C-mount with adjustable back focus
Color Sensor Filter Pattern
Bayer
Full Resolution Frame Rate 30 fps
Frame Rate (640 x 480 ROI) 55 fps
I/O 1 isolated input/output, 1 non-isolated input/output,
1 RS-232 input/output
Power Requirements Less than 3.5W
(5V to 16V)
A/D 14 bit
Output 12 bit
Trigger latency* 2us for non-isolated I/O, 10us for isolated I/O
Trigger Jitter* ±20ns for non-isolated I/O, ±0.5us for isolated I/O
Tpd* 10ns for non-isolated I/O, 1.3us for isolated I/O
Operating Temperature 0 to 70 Celsius***
Operating Humidity 20 to 80% non-condensing
Weight 59g
Hardware Interface Standard IEEE 802.3 1000BASE-T, 100BASE-TX
Software Interface Standard GigE Vision Standard 1.0
Regulatory RoHS
† Applies to GB1380C only.
†† Power consumption will increase with reduced ROI imaging and color interpolation.
††† Nominal operating voltage is 12V. Cameras have been tested at 12V.
* See Notes on Triggering in the Addendum.
***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GB CAMERAS, SPECIAL
CARE IS REQUIRED TO MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE
CAMERA IS TO BE OPERATED IN A WARM ENVIRONMENT, IT IS SUGGESTED THAT THE
CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET AND THAT
THERE IS SUFFICIENT AIR FLOW.