Alptop Security AT-A3 Instruction manual

ALPTOP
Wire-FreeRechargeableHDSmart SecurityCamera
AT-A3 Quick User Guide
Place it Anywhere, Watch on Phone Anytime

Warranty Service
Thanks for your shopping and trust.
If you have a good experience with our product,
please leave us a review. We will optimize your purchase experience
as much as we can and provide an excellent lifetime online service.
......................................................................................................................................
If you meet any problems in using our product,
pleasecontact with us SOON by email as below. We will supply a best
solution foryou tosolve anyproblems in24Hours.
Any advice will be collected and we’ll do our best to improve.
......................................................................................................................................
Register via below link to get 3 Years Warranty Extension
https://form.jotformeu.com/92018442287357
For Product Service ：
[e-mail]
For Distributor:
[e-mail]
If this manual is not clear enough to read,
please download via our website:
www.alptopsecurity.com

INDEX PAGE
 PackageContents ............................................P1
 Product Diagram ..............................................P2
 Install CloudEdge APP ......................................P3
 Register Account ..............................................P4
 HowtoAdd CameratoAPP ........................P4.5.6.7
1 ． Install Micro SD Card.............................P4
2 ． Power on Camera..................................P4
3 ． Wi-Fi Setting..........................................P5
4 ． APP Setting........................................P5.6.7
 Device Manual .............................................P8.9
 P2P Sharing .....................................................P9
 BodyDetection Setting ...................................P10
 AlarmNotificationandPlayback ....................P10.11
 Camera Installation .........................................P11
 ImportantNotes .............................................P12
 Appendix .........................................................P13
 FAQ ..................................................................P14

1
Package Contents
Battery Camera * 1
Iron Ball Wall Mount * 1
Quick User Guide * 1
Double-Sided Adhesive * 2
Screws Set * 1
USB Cable * 1
Free Outdoor Bracket * 1

2
Product Diagram
No.
Camera key
Operation
1
Power Key
Press and hold for 5 seconds to power
on/off
2
Power Key
Quick press 1 second to wake up the
camera from standby mode
3
Reset Hole
Press and hold for 5 seconds, it will reset
and restart

3
Install CloudEdgeAPP
Search “CloudEdge” in App store or Google Play store, or
scan below QR Code todownload and install on smart
phone.
For IOS For Android
*Tips: Please ALLOW below 2 permissions when use this
App at first time .
1. Allow CloudEdge use mobile cellular data and wireless
LAN (Function: If not allowed, it will be failed to add IP
camera).
2. Allow CloudEdge to get system push message
permissions (Function: When the camera triggers motion
detection or audible alarm, the phone can receive alarm
push).

4
Register Account
New users need to register by e-mail, click "Register",
followthestepstocompletetheregistrationofthe
account, and log in.
How to Add Camera to APP
1. Install Micro SD card
Please insert Micro SD card to record videos when motion
detected and playback. ( Micro SD card is not included, it
supports 128GB Max.)
*Tips: Pleaseinsertthe MicroSD cardBEFORE PowerOn,
otherwise, the SD Card cannot be detected.
2. Power on Camera
Press the Power Button for 5 seconds to Turn on Camera
(Ifcannotpoweron,pleaseplugin DC5V1A/2Aphone
adaptertocharge15min first).Poweradapteris not
included.
*Tips: Ensure the indicator light slowly blinking in RED
before setupWi-Fi

5
3. Wi-Fi Setting
Putthecameraandsmartphone1to3feet (30to100cm)
away from the router to set W-iFi
*Tips: Please note camera only works under 2.4G Wi-Fi,
not supports 5G Wi-Fi.
4. APP Setting
4.1 Open CloudEdge App, Click and select “Battery
Camera”.

6
4.2 Select “The device has flashed red” and tap “Next” for
below 3 Steps.
4.3 Select2.4Ghz Wi-Fi SSID and inputpassword, tap NEXT

7
4.4 Put the QR code in front of the camera lens about
15cm.
The device lens is aimed at
the QR code on the phone
screen witha distance of
15 cm. After the device
recognizes the QR code, it
will sound "Boogu", after
heard it, then tap "Hear
Tone".
4.5 After click “Hear tone”, camera will start connecting
WI-FI and skip to “Search to Device” page, after setup
finished,youcaneditcameranamehere,thenclick
“DONE”toopencamerainMyDevicelist,nowyoucan
watch real-time video.