Altitude Dream O2 Technology Dream Cap User manual

Hypoxico, Inc.
Head Bivy Manual 1
Hypoxico, Inc. • 12 2nd St. • Suite 102 • Gardiner, NY 12525 • 212.972.1009
The information transmitted, including attachments, is intended only for the person(s) or entity to which it is addressed and may contain confidential and/or privileged material.
Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited.
DREAM CAP USER MANUAL

Altitude Dream O2Technology
DREAM CAP USER MANUAL 2
Thank you for purchasing a DREAM CAP. This manual contains a list of the parts included
with your purchase, step-by-step instructions with pictures on how to set up your DREAM
CAP, how to connect your altitude generator, and best care practices.
Parts
DREAM CAP fabric
one included
Aluminum arcs
two included
Unpack and organize all parts to ensure everything is
present. Contact Altitude Dream if you’re missing any parts.
DREAM CAP bag
one included
Arcs storage bag
one included

3
Assembly
Step 1: Structure the Arcs
Snap the disassembled aluminum arcs into arc shapes by linking the segments.
Step 2: Slot Arcs into Fabric
Locate the two slot openings on the side corners of the DREAM CAP fabric. Slide one arc
through each slot until it reaches the back corner. Then secure the velcro on the front
corner slot openings to keep the arc in place. (Note: You may have to apply some
pressure to close the velcro.) Repeat with the other arc in the other slot. One slot has a
break in the middle. This is necessary so the arcs can cross at the top of the DREAM CAP.
Slot opening Velcro Arcs cross on top of DREAM CAP
Altitude Dream O2Technology
DREAM CAP USER MANUAL

4
Step 3: Connecting Your Altitude Generator
Insert the end of the tubing from your Altitude generator through either of the holes on the
side of your DREAM CAP. If you’re using an Everest Summit II, then connect your HEPA filter
to the end of the tube once it’s inside the DREAM CAP. Make sure the holes are sinched
and sealed tightly in order to effectively reach and remain at your desired altitude.
Thank you for your purchase!
If you have any questions concerning your Dream Cap, contact us via email or phone.
We are here to help take your training to the next level!
Care
Allow your DREAM CAP to air out when not in use. Wipe down the DREAM CAP fabric from
time to time with an anti-bacterial soap or wipe to keep it clean.
Altitude Dream O2Technology
DREAM CAP USER MANUAL