Polanik HR-12 User manual

TECHNICAL SPECIFICATION
ASSEMBLY MANUAL
Hammer racks
HR-12
HR-12-w
File: 2014-07-15
PRODUCT SUPPORT
Paweł Ciechanowski
p ciechanowski@polanik com

Technical specification/Assembly manual HR-12 HR-12-W 2/4
Con en s
Chap er Page
I General description and use 2
II Technical specification 2
III Packing and transport 2
IV Assembly 3
V Operation and maintenance 3
VI Declaration 4
I. General descrip ion and use
Racks (HR series) are designed for storing hammers in warehouses and for using them during athletics competitions
HR-12 HR-12-W
II. Technical specifica ion
Code Weigh [kg] Dimensions af er assembly
leng h/wid h/heigh [mm]
Ma erial Model Capaci y[pcs]
HR-12 8,30 820/420/760
steel powder
painted
stationary 12
HR-12-W 10,00 820/420/760
steel powder
painted
on wheels 12
III. Packing and ranspor
The rack is delivered in parts, packed in a cartoon box

Technical specification/Assembly manual HR-12 HR-12-W 3/4
IV. Assembly
The HR-12 rack should be screwed using M6x35 screws and pads Ø8 The rack HR-12-W should be screwed in the way
the picture below shows
V. Opera ion and main enance
The rack should be stored in a roofed and dry place
Even the best technical solutions cannot substitute for common sense The usage of the product must take place
under the supervision of qualified trainers The producer shall not be liable for any incidents caused by the improper
product installation, assembly or its misuse The producer reserves the right to introduce without warning changes in
product constructions and colours

Technical specification/Assembly manual HR-12 HR-12-W 4/4
VI. Declara ion
1) No 2013-12-04
2) Issuer’s name: POLANIK Sp z o o
Issuer’s address: Życzliwa 11, 97-300 Piotrków Tryb
3) Declared items
4) Technical specification described above is in accordance with the factory’s internal engineering standard
Additional information
5) The declaration was made for:
Purchaser and User
The declaration was signed on behalf and with authorization:
POLANIK Sp z o o
2014-07-15 Piotrków Tryb
(Date and place)
Paweł Ciechanowski
Product manager
6) ……………………………………… ……………………………………………………………………………
(Name, function) (Signature or it’s equivalent authorized by the Exhibitor)
No Name Code
1 Stationary hammer rack HR-12
2 Hammer rack on wheels HR-12-W