ALTUS Connect Series User manual

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
1
Series Description
The Series Connect offers a portfolio for Industrial Data Communication (IDC) for fast Ethernnetwork connectivity and t.
Designed asan ideal solution for industrial applications, connecting Programmable Controllers (CPs), Human Machine
Interfaces (HMIs), Frequency Inverters and supervisory stations running on industrial servers or computers, the Connect
Series brings a selection of switches and media. With an easy installation procedure, DIN rail and wall mounting, and a
robust IP30 standard design for applications in harshenvironments, the Connect Series supports high temperature
variations,which ensures reliable operation at 10/100 Mbps. Thedicionalmente,its alt performance switchingmechanism
meets all requirements for industrial data communication.
Data for Purchase
CET2-0500 Member Items
The packaging of this product containsthe followings itens:
A CET2-0500 Switch
Wall mounting brackets and screws
ET2-0602-M Member Items
The packaging of this product containsthe followings itens:
An ET2-0602-M switch
Wall mounting brackets and screws
ET2-0800 Member Items
The packaging of this product containsthe followings itens:
An ET2-0800 switch
Wall mounting brackets and screws

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
2
ET5-0802-M Member Items
The packaging of this product containsthe followings itens:
An ET5-0802-M switch
Wall mounting brackets and screws
Manual on CD
RJ45 Console Cable for DB9 Serial
MET2-0201-M Items Members
The packaging of this product containsthe followings itens:
A MET2-0201-M media converter
Wall mounting brackets and screws
Installation Manual
Product Code
The following codes should be used to purchase the product:
Code
Description
CET2-0500
Industrial Switch 5 electric doors, unmanageable
ET2-0602-M
Industrial switch 4 electric ports, 2 multimode optical interfaces, non-manageable
ET2-0800
Industrial switch 8 electric doors, unmanageable
ET5-0802-M
Industrial switch 6 electric ports, 2 multimode optical interfaces, manageable
MET2-0201-M
Industrial converter from electric Ethernet interface to multimode optics

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
3
Description of CET2-0500
CET2-0500 is a 5-port s fast Ethernet switch designed to be compact, which makes it the ideal model to fit inside
pain and is with limitedspaces such asin machine control boxes and duct assembly rooms. For installations in
hostile field environments, suchas vibration machines or duct assembly rooms, the CET2-0500 can be easily
mounted directly andon the DIN rail. With IP3 0 level and rigid alloy housing, the CET2-0500 can rand sistir to
a wide temperaturerange, severe electromagnetic interference and vibration.
Main features:
Interface & Performance
All copper ports support Automatic MDI/MDI-X function
5x 10/100Tx Fast Ethernet
Store-and-Forward Switching Architecture
Table of 1k MAC Addresses
448kb Memory Buffer
Feeding
Redundant power 12-48Vdc with removable 4-pin terminal block
Maximum Current 0.09A
The power specification conforms to the requirements of SELV (Safety
Extra Low Voltage), and the power supply must comply with UL 61010-1
and UL 61010-2-201
Certification
CE/FCC
61010-1 UL
UL 61010-2-201
Operating Temperature
Between -10ºC and 60ºC
Cabinet/Installation
IP30 protection
Installation in industrial environment of Grade 2 of Pollution
DIN rail mounting and wall design
CET2-0500
Available modes
Switch mode
Connectorands
Ethernet port
RJ45
Fibra port
It does not have
Power Input
Removable post with 4 pins
LED diagnostic
PWR
Indication of power input
LAN port
Link/Act/Speed
Indication of network connection, active network
Reliable Mechanical Design
Industrial applications are known for harsh environments and are required to run non-stop. The product is designed
for adverse conditions such as high or low temperatures, impacts or vibration. To handle the demands of industrial
environments, the alloy housing is rigid and conforms to ip30 protection level.

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
4
General Characteristics - CET2-0500
CET2-0500
Technology
Standards
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
Processing Type
Store and Forward
Protocol
CSMA/CD
Flow Control
IEEE 802.3x Standard for Data Flow Control, Back-Pressure Mode
Available
Properties
Architecture
Switching without Lock
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Memory Buffer
448k bits
MAC Table Size
1k
Interface
RJ45 ports
5x 10/100BaseT(X), Auto Speed Negotiation, Full/Half Duplex
Mode, MDI/MDI-X Automatic Connection
LED indicators
Feeding
Ethernet Ports: Connected: Connecting / Flashing: Data
Transmission
Network Cable
10BaseT: CAT3 cable, 4 or 5 of 2 pairs UTP/STP EIA/TIA-568 100-
ohms (100m)
100BaseTX: 2-pair CAT5 cable UTP/STP EIA/TIA-568 100-ohms
(100m)
Feeding
Requirements
Input Voltage
12-48 Vdc, Redundant Input
Overload Current
Protection
Gift (Slow-Blow Fuse)
Power Connection
1 Removable 4-Pin Terminal Block
Polarity Reversal
Protection
Present
Energy Consumption
1.2 Watts
Mechanical
Characteristics
Shell
Metal, IP30 Protection
Dimensions
26 x 95 x 75 mm (L x A x P)
Weight
Unit Weight: 0.3kg, Pack Weight: 0.45kg
Mounting
DIN rail mount, Wall Mount
Environmental
Limits
Operating Temperature
-10°C ~ 65°C
Storage Temperature
-40°C ~ 85°C (-40°F ~ 185°F)
Relative Humidity of the
Environment
5 to 95% (without condensation)
Regulatory
Approvals
EMI
FCC Part 15 Subpart B Class A, CE EN 55032 Class A
EMS
EN 61000-6-2, EN 61000-6-4
Free Fall
IEC60068-2-32
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
Environmental
Rohs
Compliance
NEMA TS2 (ITS) - EoT version

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
5
Hardware Description –CET2-0500
Physical Dimensions
See below the physical dimensions of the CET2-0500:
(L x A x P) is 26mm x 95mm x 75mm

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
6
Front Panel
The front panel of the CET2-0500 is show in the image below:
CET2-0500 Front Panel
Higher View
The image below demonstrates the top panel of the CET2-0500, which is equipped with a removable 4-pin block
connector, for two 12-48Vdc power inputs:
CET2-0500 Top Panel View

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
7
LED indicators
There are LED indicators located on the front panel of the switch that show the power and network status. Each
LED indicator has a different color and has its own meaning, as shown in the table below:
LED
Colour
Description
PWR
Green
Linked
Power input 1 or 2 is active
Off
Power input 1 or 2 is inactive
LAN Port
LINK/ACT/SPEED
Green
Linked
Connected to the network, 100Mbps
Flashing
Network is active
Off
Not connected to the network
LAN Port
LINK/ACT/SPEED
Green
Linked
Connected to the network, 10Mbps
Flashing
Network is active
Off
Not connected to the network
LED indicators for CET2-0500
Ethernet ports
RJ45 ports automatically identify connections from 10Base-T and 100Base-TX devices. Automatic MDI/MDIX means
that the switch can connect to another switch or workstation without changing direct or crossover cabling. See in the
table below the squematic of crossover and direct cables:
Crossover Cable
Direct Cable
Nº / Pin signal
Nº / Pin signal
Nº / Pin signal
Nº / Pin signal
1 / RX+
3 / TX+
1 / RX+
1 / TX+
2 / RX-
6 / TX-
2 / RX-
2 / TX-
3 / TX+
1 / RX+
3 / TX+
3 / RX+
6 / TX-
2 / RX-
6 / TX-
6 / RX-
NOTE:"+" and "-" signals represent the polarity of the wires that make up each pair.
Cabling Use the twisted-pair CAT5 cable, or top cabling for RJ45 port connections. The cable between the switch and
the device (switch, hub, workstation, etc.) must be less than 100m long.
Connecting Power Inputs
The steps below demonstrate the electrical installation process of the equipment:
Step 1: Insert the positive and negative wires into the PWR1 (V1+, V1-) and PWR2 (V2+, V2-) contacts of the
block connector, as shown below:
Block Power Terminal

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
8
Step 2: Tighten the screw screws to prevent the wires from loosening, as shown below:
Block Power Terminal
Caution: use only copper conductors (100°C). Tighten the screws at 0.56 N.m.
The wire gauge for the block terminal should be 18-20 AWG (0.81mm to 1.02mm).
Note on Grounding:
Grounding and routing of wires helps reduce noise effects due to electromagnetic interference (EMI). Make the
grounding connection of the screw to the grounding surface before connecting devices. The ground screw
symbol is shown below:
Ground screw
Caution: Using shielded wires allows better electromagnetic compatibility.
Mechnical Assembly –CET2-0500
DIN Rail Assembly
DIN rail support is factory pre-installed on the industrial Ethernet switch. If support isn't installed, see the
image below to learn how to install it:
Switch back and DIN rail holder

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
9
Follow the steps below to learn how to secure the industrial Ethernet switch.
Step 1: Use the screws to install the DIN rail holder on the back of the switch.
Warning: The torque to tighten the screws on the device is 0.4 Nm.
Step 2: To remove the din rail holder, do the opposite of step 1.
Step 3: After installing the DIN rail holder on the back of the switch insert the top of the bracket into the
rail, as shown in the figure below:
Insert the bracket into the DIN rail
Step 4: Pull the bracket slightly down on the rail, as shown in the figure below:
Stabilize the switch on the DIN rail

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
10
Step 5: Make sure the bracket firmly installed on the rail.
Step 6: To remove the rail switch, do the opposite of the steps above.
Wall Mount
Follow the steps below to mount the switch using the wall mount bracket, as shown in the figure below:
Remove the DIN rail holder from the switch
Warning:"Wall" means control panel wall.
Step 1: Remove the DIN rail holder from the switch when loosening the screws.
Step 2: Position the wall mount brackets at the top and bottom of the switch.
Step 3: Use the screws to secure the wall mount bracket to the switch.
Caution: The torque to secure the screws to the device is 0.4 Nm.
Step 4: Use the hook holes at the corners of the wall mount bracket to hang the switch on the wall.
Step 5: To remove the wall mount bracket, do the opposite of the steps above.

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
11
In the figure below are the dimensions of the wall mount bracket:
Dimensions of the wall mount bracket
Hardware Installation –CET2-0500
Installation Steps
This section explains how to install CET2-0500.
Attention:
1. This device is designed for indoor use and at altitudes of up to 2,000 meters.
2. This device is designed to be installed in a casing and control panel
Installation steps:
Step 1: Unpack the switch from the original box
Step 2: Make sure the DIN rail holder is screwed into the switch.
If the DIN rail holder is not screwed to the switch, see the DIN Rail Mounting section for installation
instructions
If you want to mount the wall switch, see the Wall Mount section for installation instructions
Step 3: To hang the switch on a DIN rail or wall, see the Mechanical Assembly section
Step 4: Energize the switch, and then the "on" LED will light up.
If you need help with how to do power cabling, see the Connecting Power Inputs section
See the LED Indicators section for led lights
Step 5: Prepare a twisted or direct pair CAT5 cable for Ethernet connection
Step 6: Insert one side of the RJ45 cable into the switch port, and the other side into the network Ethernet device
port (e.g., PC or server). The Ethernet port LED (RJ45) on the swtich should be connected when the cable is
connected to the network device.
See the LED Indicators section for led lights
Step 7: When all connections are made and the LEDs indicate normal operation, the installation is complete.

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
12
Maintenance and Service –CET2-0500
If the device needs service of any kind, the user is prompted to disconnect it and remove it from its
installation. The initial installation must be done in such a way that this procedure is as convenient as
possible.
Voltage/power lines should be properly insulated as well as other cables. Be careful when handling
them to avoid accidents, such as tripping over cables.
Do not insert foreign objects of any kind under any circumstances into the heat dissipation holes located
on the different faces of the device. This can not only cause damage to the internal layout, but also
cause damage to the user.
Do not open the device under any circumstances, please contact the seller for any necessary repairs, or
follow the instructions in this manual.
Clean the device with soft cloths.
Troubleshooting –CET2-0500
Make sure you have the correct power cord and/or adapter. Never use a source or adapter with a non-
compliant DC output voltage, or burn the equipment.
Select the appropriate UTP/STP cable to establish the network. Use an unshielded twisted pair (UTP)
cable or shielded twisted pair (STP) cable for RJ45 connections: 100Ω CAT5 to 10M/100Mbps. Also,
make sure that the length of any connection with twisted pair cable does not exceed 100 meters.
Diagnosing LED indicators: to assist in identifying problems, the switch can be easily monitored with
LED indicators, which help identify if any problem exists.
See the LED Indicators section for led lights indication
If the POWER INDICATOR LED does not turn on when the power cord is connected, the user may be
having a problem with the cable. Look for loose power connections, power outages, or power outage
surges.
Contact Altus for technical support service if the issue can't be resolved yet.
If the switch LED indicators are normal and the cables are properly connected, but the packets are not
yet transmitted, check the configuration or status of the system Ethernet devices.

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
13
Description of ET2-0602-M
The ET2-0602-M is a 6-port fast Ethernet switch (4 RJ45 ports and 2 Fiber ports) designed to be compact, making
it the ideal modelfor fitting inside painand is with limitedspaces suchas in machine control boxes and duct
assembly rooms. For installations in hostile field environments, such as vibrating machines or duct assembly
rooms, the ET2-0602-M can be easily mounted directly andon the DIN rail. With IP30 level and rigid metal alloy
housing, the ET2-0602-M can rand sistir at a widetemperature range, severe electromagnetic interference
and vibration.
Main features:
Interface & Performance
All copper ports support Automatic MDI/MDI-X function
4 RJ45 ports and 2 Fiber (SC) ports with Multimode support
Store-and-Forward Switching Architecture
2k MAC Address Table
448kb Memory Buffer
Feeding
Redundant power 12-48Vdc with removable 6-pin terminal block
Maximum Current 3.5A
Certification
CE/FCC
UL 508
12.12.01 ISA
Operating Temperature
Between -10ºC and 65ºC
Cabinet/Installation
IP30 protection
Installation in industrial oluition environment
DIN rail mounting and wall design
ET2-0602-M
Available modes
Switch mode
Connectorands
Ethernet port
RJ45
Fibra port
SC
Power Input
Removable post with 6 pins
LED diagnostic
P1
P2
Indication of the power input
Fault
Indication of lack of redundant power input
Fiber Door
LINK/ACT
Connection/traffic indication on fiber port
LAN port
LINK/ACT/SPEED
Connection/traffic indication on Ethernet port
Reliable Mechanical Design
Industrial applications are known for harsh environments and are required to run non-stop. The product is
designed for adverse conditions such as high or low temperatures, impacts, vibration or corrosion. To handle the
demands of industrial environments, the aluminum alloy housing is rigid and conforms to ip30 protection level.

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
14
General Characteristics - ET2-0602-M
ET2-0602-M
Technology
Standards
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
Processing Type
Store and Forward
Protocol
CSMA/CD
Flow Control
IEEE 802.3x Standard for Data Flow Control, Back-Pressure Mode
Available
Properties
Architecture
Switching without Lock
Transfer Rate
14,880pps for Ethernet port
148,800pps for Fast Ethernet port
Memory Buffer
448k bits
MAC Table Size
2k
Interface
RJ45 ports
4x 10/100BaseT(X), Auto Speed Negotiation, Full/Half Duplex
Mode, MDI/MDI-X Automatic Connection
Fiber Doors
2x 100Fx with SC/ST type connector
Multimode (2Km) - 50/125um or 62.5/125um
LED indicators
Power 1, Power 2, Failure
Ethernet Ports: Connected: Connecting / Flashing: Data
Transmission
Fiber Ports: Connecting / Flashing: Data Transmission
Wavelength
1310nm
Network Cable
10BaseT: CAT3 cable, 4 or 5 of 2 pairs UTP/STP EIA/TIA-568 100-
ohms (100m)
100BaseTX: 2-pair CAT5 cable UTP/STP EIA/TIA-568 100-ohms
(100m)
Feeding
Requirements
Input Voltage
12-48 Vdc, Redundant Input
Overload Current
Protection
Gift (Slow-Blow Fuse)
Power Connection
1 Removable 6-Pin Terminal Block
Polarity Reversal
Protection
Present
Energy Consumption
6watts
Contact Relé
24Vdc, 1A resistive
Mechanical
Characteristics
Shell
Metal, IP30 Protection
Dimensions
30 x 142 x 99 mm (L x A x P)
Weight
Unit Weight: 0.5kg, Pack Weight: 0.7kg
Mounting
DIN rail mount, Wall Mount
Environmental
Limits
Operating Temperature
-10°C ~ 65°C
Storage Temperature
-40°C ~ 85°C (-40°F ~ 185°F)
Relative Humidity of the
Environment
5 to 95% (without condensation)
Regulatory
Approvals
EMI
FCC Part 15 Subpart B Class A, CE EN 55022 Class A
EMS
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4 (EFT),
IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8
(Magnetic Field)
Free Fall
IEC60068-2-32
Shock
IEC60068-2-27
Vibration
IEC60068-2-6
Environmental
Rohs
Safety
UL 508, ISA 12.12.01
Compliance
NEMA TS2 (ITS) - EoT version

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
15
Hardware Description - ET2-0602-M
Physical Dimensions
See the image below for the physical dimensions of the ET2-0602-M:
(L x A x P) is 30mm x 142mm x 99mm
Physical Dimensions of The ET2-0602-M
Front Panel
The front panel of the ET2-0602-M is show in the image below:
ET2-0602-M Front Panel

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
16
Higher View
In the image below is demonstrated the top panel of the ET2-0602-M, which is equipped with a removable 6-pin
block connector, for two 12-48Vdc power inputs:
ET2-0602-M Top Panel View
LED indicators
There are LED indicators located on the front panel of the switch that show the power and network status. Each
LED indicator has a different color and has its own meaning, as shown in the table below:
LED
Colour
Description
P1
Green
Linked
Power input 1 is active
Off
Power input 1 is inactive
P2
Green
Linked
Power input 2 is active
Off
Power input 2 is inactive
Fault
Green
Linked
Power input 1 or 2 is inactive
Off
Power inputs 1 and 2 are functional
LAN Port
LINK/ACT/SPEED
Green
Linked
Connected to the network, 100Mbps
Flashing
Network is active
Off
Not connected to the network
Green
Linked
Connected to the network, 10Mbps
Flashing
Network is active
Off
Not connected to the network
Fiber Port
LINK/ACT
Green
Linked
Connected to the network, 100Mbps
Flashing
Network is active
Off
Not connected to the network
LED indicators for ET2-0602-M

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
17
Fiber Door
The Fiber Port of the Type SC connector can operate in Multimode. When connecting Fiber Ports to each other,
follow the instructions as illustrated below to make the connection correctly. A wrong connection will cause
abnormal operation.
SC Connector
Caution: This is a Class 1 Laser/LED product. Do not look directly at the Laser/LED beam
Cabling
Use the 2/4 pair CAT 5e twisted pair cable or top cabling for RJ45 port connections. The cable between the switch
and the device (switch, hub, workstation, etc.) must be less than 100m long.
Connecting Power Inputs
The steps below demonstrate the electrical installation process of the equipment.
Step 1: Insert the positive and negative wires into the PWR1 (V1+, V1-) and PWR2 (V2+, V2-) contacts into the
block connector as shown in the image below:
Power Terminal Block
Step 2: Tighten the wire fixing screws to prevent the wires from loosening, as shown below:
Power Terminal Block
Note :Use only copper conductors (60-75ºC). Tighten the screws at 0.56 N.m.The wire gauge for the block
terminal should be 18-20 AWG (0.81mm to 1.02mm).

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
18
Connecting the Fault Alarm Contact
The Fault Alarm contact is located in the middle of the block terminal connector as shown in the image below. When
inserting the wires, the fault status will be detected, including power failure or connection failure on the port
(manageable industrial switch only) and forming a normally open circuit. An example application for the Fault alarm
contact is demonstrated in the image below:
Connecting the Fault Alarm Contact
Note: The wire gauge for the block terminal should be between 12-24 AWG (0.51mm to 2.05mm). If you use only one
power supply, place a jumper from Pin 1 to Pin 5 and Pin 2 to Pin 6 to eliminate the Fault alarm.

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
19
Mechanical Assembly –ET2-0602-M
DIN Rail Assembly
The DIN rail holder is factory preinstalled on the switch. If support isn't installed, see the image below to
learn how to install it.
Switch back and DIN rail holder
Follow the steps below to learn how to fix the switch.
Step 1: Use the screws to install the DIN rail holder on the back of the switch.
Step 2: To remove the DIN rail holder, do the opposite of Step 1.
Step 3: After the DIN rail holder installed on the back of the switch, insert the top of the bracket into the rail, as
shown in the image below:
Insert the switch into the DIN rail

Industrial Communication Connect series
Doc. Code: CE125001 Rev: A
Altus S. A.
20
Step 4: Pull the bracket slightly down the rail, as shown in the image below:
Stabilize the switch on the DIN rail
Step 5: Make sure the bracket firmly mounted on the rail.
Step 6: To remove the rail switch, do the opposite of the steps above.
Wall Mount
Follow the steps below to mount the switch using the wall mount bracket, as shown in the image below.
Step 1: Remove the DIN rail holder from the switch when loosening the screws.
Step 2: Position the wall mount brackets on the top and bottom of the switch.
Step 3: Use the screws to secure the wall mount bracket to the switch.
Step 4:Use the hook holes at the corners of the wall mount bracket to secure the switch to the wall.
Step 5: To remove the wall mount bracket, do the opposite of the steps above.
Remove the DIN rail holder from the switch