Alvin Mobile Step-Design File Tube Rack WSF36 User manual

Note:
Plastic clips can be snapped on and removed easily
by hand. Most grid sections require only 2 clips per
side for support. For safety, clips attached on exterior
of cart should be positioned with flanges facing inward.
See reverse side for assembly
Parts Included:
Assembled Rack
Mobile Step-Design
File Tube Rack
Assembly Instructions For model WSF36
A 2pcs Large Side Grids
B 1pc Back Grid
D 1pc Front Grid
C 2pcs Center Grids
E 1pc Bottom Step
F 4pcs Casters
G 1pc Bag Small
Plastic Clips
H 1pc Bag Large
Plastic Clips
Clip Attachment

WSF36 Assembly Instructions
x4
F
www.alvinco.com • [email protected]
LIT-A11157_WSF36 10/11
To Assemble:
1Attach casters (F) to each of the large side grids (A).
2Using large plastic clips (H), attach one large side
grid to the back grid (B). Attach the second large side
grid to the other side of the back grid. Attach center
grid (C) to bottom.
3Drop in bottom step (E). 4
5
Attach front grid (D) to large side grids. Using small
plastic clips (G), attach center grid to large side grids.
Attach extra clips where needed.
x2
A
C
B
H
D
G
E
©2011 ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT 06095-0722
Phone: [phone] • Toll-Free: 800-444-2584 • Fax: [phone] • Toll-Free Fax: [phone]