Alvin WRF38 User manual

Note:
Plastic clips can be snapped on easily by hand but pliers
may be necessary for removal. Most grid sections require
only 2 clips per side for support. For safety, clips attached
on exterior of cart should be positioned with flanges
facing inward.
King Size Mobile Roll File
Assembly Instructions For model WRF38
Tools Required: Screwdriver, plyers, or small wrench.
Parts Included:
Clip Attachment
H45pcs Plastic Clips
G1pc Outer Support Bar
E1pc Dust Protector
Bottom Cover
F1pc Hinged Center Partition
D2pcs Large Side Grid
B1pc Base Grid
C2pcs Small
Side Grid
A4pcs Caster Assembly
(16 Screws, Nuts)
See reverse side for assembly
Assembled Rack

WRF38 Assembly Instructions
www.alvinco.com • [email protected]
LIT-A11157-WRF38 10/11
©2011 ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT 06095-0722
Phone: [phone] • Toll-Free: 800-444-2584 • Fax: [phone] • Toll-Free Fax: [phone]
A
E
F
H
To Assemble:
1Attach casters (A) to base grid (B).
2Using plastic clips (H), attach all 4 side grid sections
(C& D) together.
5
3Place dust protector bottom cover (E) on base grid.
Insert hinged center partition (F) and attach with
plastic clips.
4
6
Attach four sides to base grid with plastic clips.
Make certain horizontal wires are facing out.
Place outer support bar (G) over entire unit
and down 1 grid row. Attach with plastic clips.
x2
C
x2
D
G