AMASE AUDIO 1028 User manual
Installation manual
Are you ready to install our unit?
Let's go >>>
Universal 10.1inch Deckless
Android (1028)
V2
23
STEP Double check if has any
missing before installation.
1. Power cable * 1
3. USB Adapter cable *1
5. External miscrophone *1
7. Disassembly tool *1
9. Mounting brackets *2 with
short screws *8
2. GPS antenna * 1
4. USB adapter cable *1
6. Wi-Fi antenna *1
8. 15A fuse *1
9
4 steps to install
STEP
STEP
STEP
STEP
01
02
03
04
Do the full installation.
Test the head unit functions.
Test your unit before a full
installation.
(Connect the power cable to your car)
Check
1) Do the screen is broken ?
2) Do the accessories have missing ?
Accessories
45
- Push the screen into the unit with your hands like (2).
- Hold the clip of cable and lightly put one side to connect the plug
of unit and then completely connect.
(Please keep the car engine turn off when you do this step)
1. Install the screen
3. Connect those wires provided in the package like (1)
Power cable, (2) USB cable, (3) GPS antenna,
(4) Wi- antenna and (6) External microphone as shown.
226
4
3
1
STEP
02
Test your unit before a full
installation.
(Connect the power cable to your car)
After you remove the factory radio, you can take out
the power cable to connect the head unit and casually
connect the screen cable to the screen, then try to turn
it on. If this part is no problem, you can do the remain
steps.
STEP
03 Do the full installation.
67
4. Install the screen and plug the head unit into the center
console, then place the GPS antenna and microphone as
shown. The wires are hidden in the side of pillar trim and led
to the head unit.
STEP
04 Test the head unit functions.
(FM, SD, USB, Bluetooth, reversing, handbrake,
headlight and etc)
Wiring diagram
89
About the screen rotated features
Top left Top right
Bottom left
Left rotate 90°C Right rotate
a little bit
Bottom right
Wire connection for the amplier, the subwoofer
and the headset monitors
10 11
12 13
Below is our rear camera. This will be a reference to teach
you how to connect a rear camera to our head unit.
The ASIN of this rear camera has placed in the listing.
Optional : Install a rear camera System Initial setup
1
2
Set radio location
Set RDS
The default radio country in the unit is Europe, if you
are from other country, you need to access the "factory
mode (PW: 126) > Radio" to adjust the country.
The Radio has RDS function but this function is only
for Europe, if the clients from other countries use it, it
will affect the radio receival, so please close it.
14
Q: Do my head unit has one year maintanence?
A: Denitely yes, you will have our commitment
after you purchase.
(The maintainence period will base on the date you
make the order)
About after sales service
Set the unit language
Please go to setting > Languages & input, then you
can add the desirable language you need.
3
Table of contents
