AMAZON COMMERCIAL B07XMV34PX User manual

High Velocity Industrial Fan
Ventilador Industrial de Alta Velocidad
Ventilateur Industriel à Grande Vitesse
B07XMV34PX, B07XGQ9RM3

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Assembly • Montage • Montaje . . . . . . . . . . . . 21

3
EN
IMPORTANT SAFETY
INSTRUCTIONS
Read these instructions carefully and retain them for future use.
If this product is passed to a third party, then these instructions
must be included.
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of fire, electric shock, and/or injury to
persons including the following:
WARNING Risk of injury! Avoid contacting moving parts. Wait until
all components have completely stopped before touching them.
CAUTION To reduce the risk of fire or electric shock, do not use
this fan with any solid-state speed control device.
• Before connecting the product to the power supply, check that the
power supply voltage and current rating corresponds with the power
supply details shown on the product’s rating label.
• Do not insert fingers or foreign objects in any opening of the product
and do not obstruct the air vents.
• Do not operate any fan with a damaged cord or plug. Discard fan or
return to an authorized service facility for examination and/or repair.
• Do not run under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not
be tripped over.
• Never use the product without the safety guard or with a damaged
safety guard.
• Do not place any clothes or curtains on the product as they could be
sucked into the fan during operation and damage the product.
• During use, keep hands, hair, clothing and utensils away from the
safety guard to avoid injuries and damage of the product.
• Unplug or disconnect the appliance from the power supply before
servicing.
• This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse according to
the instructions in this manual (follow product marking for proper
fuse rating) and check the product. If the replacement fuse blows, a
short-circuit may be present and the product should be discarded or
returned to an authorized service facility for examination and/or repair.

4
EN
Polarized Plug
• This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS
Intended Use
• This product is intended for light industrial, domestic and office use.
• This product is intended to be used in dry indoor areas only. Do not
use in the presence of explosive and/or flammable materials/fumes.
• No liability will be accepted for damages resulting from improper use
or non-compliance with these instructions.
Product Description
A B C
G H I
F
D E

5
EN
ATightening knob FRear grille
BWasher GStand (left tube)
CFront grille HStand (right tube)
DPower switch IPower plug with fuse
EFan blades
Before First Use
• Check the product for transport damages.
• Remove all the packing materials.
DANGER Risk of suffocation! Keep any packaging materials away
from children – these materials are a potential source of danger, e.g.
suffocation.
Operation
Switching on/off
• Connect the power plug (I) to a suitable outlet.
• To switch the product on, rotate the power switch (D) to L(low speed),
M(medium speed) or H(high speed).
• To switch the product off, rotate the power switch (D) to 0.
Tilt adjustment
To adjust the tilt angle of the product, turn the front grille (C) up or down.
User Servicing Instructions
Fuse replacement
NOTICE The product requires a 2.5 A 125 V fuse.
• Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on cord.
• Slide open fuse access cover on top of
attachment plug towards blades.
• Remove fuse carefully by using a small
screwdriver to pry the fuse out of the
compartment by the metal ends of the fuse.
• Risk of fire. Replace only with 2.5 A, 125 Volt fuse.
• Slide closed the fuse access cover on top of the attachment plug.
Fuse
Fuse
cover

6
EN
CAUTION Risk of fire! Do not replace attachment plug. Contains
a safety device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
Cleaning and Maintenance
WARNING Risk of electric shock! To prevent electric shock,
unplug the product before cleaning.
WARNING Risk of electric shock! During cleaning do not
immerse the product in water or other liquids. Never hold the product
under running water.
Cleaning
• To clean the product, wipe with a soft,
slightly moist cloth.
• Never use corrosive detergents, wire
brushes, abrasive scourers, metal or
sharp utensils to clean the product.
Cleaning the blades
• Remove the screws on the front grille (C).
• Remove the front grille (C).
• Wipe the fan blades (E) with a soft, slightly moist cloth.
• Reinstall and secure the front grille (C) with the removed screws.
CAUTION Risk of injury! Do not remove the fan blades (E).
Storage
• Store the product in its original packaging in a dry area. Keep away
from children and pets.
Maintenance
• Any other servicing than mentioned in this manual should be
performed by a professional repair center.
Front grille
Screw

7
EN
Troubleshooting
Problem Solution
The product cannot be
switched on.
• Check if the power plug (I) is
connected to the proper outlet.
• Check if the power outlet works.
• Wait for the product to cool down.
• Replace the fuse in the power plug.
The product makes noise. • Tighten the blade.
The product vibrates. • Place the product on a level surface.
• Clean the blade.
Specifications
B07XMV34PX B07XGQ9RM3
Model number: HVF18-SP HVF20-SP
Rated voltage: 120V~, 60Hz 120V~, 60Hz
Current consumption: 1.5 A 1.5 A
Net weight: approx. 8.8 lbs
(4 kg)
approx. 10.3 lbs
(4.7 kg)
Dimensions (W x H x D):
approx. 21.8" x
21.3" x 8.27"
(55.5 x 54 x 21 cm)
approx. 23.4" x
23.8" x 9.45"
(59.5 x 60.5 x 24 cm)
Feedback and Help
Love it? Hate it? Let us know with a customer review.
AmazonCommercial is committed to delivering customer-driven products
that live up to your high standards. We encourage you to write a review
sharing your experiences with the product.
amazon.com/review/review‑your‑purchases#
amazon.com/gp/help/customer/contact‑us

21
A B C
1
A(2 x)
B(2 x)
C(1 x)
G H
2
G(1 x)
H(1 x)

amazon.com/AmazonCommercial
V01-11/19
MADE IN CHINA
HECHO EN CHINA
FABRIQUÉ EN CHINE