AmazonBasics B00NUS53CY User manual

4-Shelf Shelving Unit - Chrome
Unité De Rayonnage à 4 Étagères - Chromée
Regal mit 4 Regalböden - Verchromt
Scaffale a 4 Ripiani - Cromao
Módulo De 4 Estantes - Cromo
4段 シェルフユニット、
4层置物架 - 铬合金
B00NUS53CY
クローム

English Français Deutsch Italiano Español 日本語 中文
English ........................................... 3
Français ....................................... 15
Deutsch........................................ 27
Italiano ......................................... 39
Español ........................................ 51
日本語 ........................................... 63
中文 .............................................. 75

3
English Français Deutsch Italiano Español 日本語 中文
4-Shelf Shelving Unit - Chrome
Contents:
Make sure that the package contains the following parts:
Part Qty.
A4
B4
C
4
D
4
E
TOP
16
F12
G
1
Note: Discard the protective covers F. These are used to separate the shelves for
shipping purposes.
Welcome Guide •English
G1-1pc
G2-1pc
G3-2pcs
G4-2pcs G5-1pc
FURNITURE TIPPING RESTRAINT

4
English Français Deutsch Italiano Español 日本語 中文
Assembly
Step 1:
Setting Up the Product
TOP
TOP
TOP
TOP
TOP
A F F
C E
D
E
•Remove the protective covers Ffrom the shelves Aand dispose of them.
•
Screw one foot
D
onto the bottom of each lower pole
C
in a counter-clockwise direction.
•Attach one half of the plastic sleeve Eto each lower pole. Then attach the other
half of the plastic sleeve to each lower pole, so both halves are connected with
each other. The arrow above the TOP marks on the plastic sleeves should point
upwards. Four plastic sleeves are necessary to support one shelf.

5
English Français Deutsch Italiano Español 日本語 中文
Assembly
Step 2:
Setting Up the Product
E
E
A
C
•Put the first shelf Aonto the poles
C
and lower it down until it rests on the
plastic sleeves E.
•Attach another set of plastic sleeves to each lower pole for the second shelf
from the bottom.

6
English Français Deutsch Italiano Español 日本語 中文
Assembly
Step 3:
Setting Up the Product
C
E
A
•Put the next shelf Aonto the poles
C
and lower it down until it rests on the
plastic sleeves E.

7
English Français Deutsch Italiano Español 日本語 中文
Assembly
Step 4:
Setting Up the Product
B
B
C
C
•Screw the upper poles
B
onto the lower poles
C
in a clockwise direction.

8
English Français Deutsch Italiano Español 日本語 中文
Assembly
Step 5:
Setting Up the Product
B
E
•Attach one set of plastic sleeves Eto the upper poles
B
.

9
English Français Deutsch Italiano Español 日本語 中文
Assembly
Step 6:
Setting Up the Product
E
E
B
A
•Put the next shelf Aonto the poles
B
and lower it down until it rests on the
plastic sleeves E.
•Attach another set of plastic sleeves to the upper poles.

10
Assembly
Step 7:
Setting Up the Product
A
E
B
G
•Put the last shelf Aonto the poles
B
and lower it down until it rests on the
plastic sleeves E. Place cardboard over the corners of each shelf and gently tap
down with a rubber mallet (or similar tool) until the shelf is level.
•To improve stability (if needed), drill two tiny holes (Ø 4 mm) into the wall and
insert the dowels
G
. Secure the shelf to the wall by installing the Furniture Tipping
Restraint hardware. The full instructions are inside the hardware bags.
.
English Français Deutsch Italiano Español 日本語 中文
the instructions
Wall