AMENA WHV-B Series User manual

OPERATION
MANUAL
MODEL
WHV-B / HCV-BSERIES
COOLING ONLY
Read this Operation manual carefully and keep it for future reference

Notices for operation 
Ƶ
Ƶ
Ƶ 
Ƶ 
Do not dispose this product as unsorted municipal waste.
Collection of such waste separately for special treatment
is necessary.
CONTENTS
Operation and maintenance
Notices for use
Names and functions of each part
Operation of wireless remote control
This symbol stands for the items
should be forbidden
This symbol stands for the items
should be followed
The figures in this manual may be different with the material objects, please refer
to the material objects for reference.

Ƶ Emergency operation 7
Ƶ Clean and care 8
Ƶ Trouble shooting  10

The Refrigerant
WARNING：
To realize the function of the air conditioner unit, a special refrigerant circulates in
the system. The used refrigerant is the fluoride R32, which is specially cleaned.
The refrigerant is flammable and inodorous. Furthermore, it can leads to explosion
under certain conditions. But the flammability of the refrigerant is very low. It can
be ignited only by fire.
Compared to common refrigerants, R32 is a nonpolluting refrigerant with no harm
to the ozonosphere. The influence upon the greenhouse effect is also lower. R32
has got very good thermodynamic features which lead to a really high energy
efficiency. The units therefore need a less filling.
Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacture. Should repair be necessary, contact your nea-
rest authorized Service Centre. Any repairs carried out by unqualified personnel
may be dangerous. The appliance shall be stored in a room without continuously
operating ignition sources. (for example: open flames, an operating gas appliance
or an operating electric heater.) Do not pierce or burn.
Appliance shall be installed, operated and stored in a room with a floor area larger
than 4m .
Appliance filled with flammable gas R32. For repairs, strictly follow manufacturer’s
instructions only. Be aware that refrigrants not contain odour. Read specialist’s
manual.
2
Appliance filled with flammable gas R32.
Before use the appliance, read the owner’s manual first.
Before repair the appliance, read the service manual first.
Before install the appliance, read the installation manual first.


ƾ
ƾ
ƾ
ƾ
ƾ The power supply
must adopt the
special circuit that with air
switch protection and assure
ƾ
ƾ Keep combustilble
spray away from the
units more than 1m.
ƾ
Don't block the air
intake or outlet vents
of both the outdoor and indoor
units.
It can decrease the air conditioning
capacity or cause a malfunction.
Don’t leave windows
and doors open for
a long time while operating
the air conditioner.
It can decrease the air
conditioning capacity.
It can cause a fire or explosion
Don’t attempt to
repair the air
conditioner by yourself
The wrong repair will lead to
an electric shock or fire, so
you should contact the service
center to repair.
Be sure to pull out
the power plug as
the air conditioner not in use
for a long time.
Otherwise, the accumulated
dusts that may cause over
heating or fire.
Never splice the
power cord or use
an extended cord.
It can cause overheating or
fire.
When having a
burning smell or
smoke, please turn off the
power supply and contact
with the service center.
If the abnormity still exists,
the unit may be damaged,
and may cause electric
shock or fire.
Please read the following carefully before operating
Notices for operation
components would be easily
damaged, when the voltage
is very low, the compressor
vibrates terribly and that the
refrigerant system will be
damaged, the compressor
and electric components
cannot work, the voltage
should be stable; there
shouldn’t be big fluctuation.
When the voltage
is very high, the
it has enough capacity.
The unit will be turned on or
off according to your requirement
automatically, please do not
turn on or turn off the unit
frequently, otherwise disadv-
antage effect may be caused
to the unit.


Notices for operation
★ ★
★★
★
★
★
★
Don’t apply the cold wind to
the body for a long time.
It can cause the health problems.
Splashing water on the air
conditioner can cause an electric
shock and malfunction.
Don’t place a space heater
near the air conditioner.
Don’t blow the wind to animals
and plants directly. It can cause
a bad influence to them.
Don’t insert your hands or stick into
the air intake or outlet vents.
Don’t use the air conditioner
for other purposes, such as
drying clothes, preserving foods, etc.
To adjust the airflow direction
appropriately. When operating
the unit, to adjust the vertical and lateral air
flow direction by use of remote controller.
Swing louver Guide louver
Please don't cut off or damage the
power cords and control cords.
If they are damaged, please ask the qualified
personnel to change them.
“This appliance is not intended for use by persorns (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person reponsible for
their safety.”
“ Children should be supervised to ensure that they do not play with the appliance.”


Working principle and special functions for cooling
Principle:
Air conditioner absorbs heat in the room and transmit to outdoor and discharged, so that
indoor ambient temperature decreased, its cooling capacity will increase or decrease by
outdoor ambient temperature.
If the unit is running in COOL mode and in low termperature, there will be frost formed on
the heat exchanger, when indoor heat exchanger temperature decreased below 0 , the
indoor unit microcomputer will stop compressor running and protect the unit.
Notices for use
ć
Anti-freezing function

Names and functions of each part
Indoor unit
Power cable
Front panel
Filter
Guide louver
Wall pipe
Bind tape
Connection wire
Drainage pipe
Remote control
Outdoor unit


Name and function of wireless remote control
ON/OFF button
Remote control
Signal transmitter
AUTO(This function is same cool mode)
COOL
DRY
FAN
HEAT(This function does not exist.)
Don't drop or throw the remote control; Don't let any liquid in the remote control and
Note: Be sure that there are no obstructions between receiver and remote controller;
put the remote control directly under the sunlight or any place where is very hot.
ƽ Press this button, Auto, Cool,Dry, Fan, Heat
MODE button
ƽ Press this button to activate / deactivate
the symbol appears on the display.
ECO button
The ECO function which enables the unit
automatically to sets the operation to achieve
energy savings.
ƽ
Press this button, Auto, Low, Middle, High
FAN button
speed can be circularly selected. After powered
on, Auto fan speed is default.
TIMER button
Operation of wireless remote control
ƽPress this button, the unit will be turned on,
press it once more, the unit will be turned off. When
turning on or turning off the unit, the Timer, Sleep
function will be canceled,
ƽ Press this button for set up timer on / off
The timer can preset between 0.5h to 24h, when the
time set less than “10” hours, the displayed time shown
by 0.5 hour as the unit, when the time set more than or
equal to “10” hours, the displayed time shown by 1 hour
as the unit.
ƽPress this button on the remote controller until the
symbol appears on the display.
The cooling function allows the air
conditioner to cool the room and at the
same time reduces Air humidity
This function reduces the humidity of the
air to make the room more comfortable.
The conditioner works in only ventilation.
AUTO FAN indicator
LOW FAN SPEED indicator
MIDDLE FAN SPEED indicator
HIGH FAN SPEED indicator
(FLASH)
TIMER OFF indicator
TIMER ON indicator
The remote control and air conditioner are
switched off.
The remote control and air conditioner are
switched on.
MODE TIMER
FAN SLEEP DISPLAY
SWING SWING
MUTE
I FEEL
TURBO
HEALTH
ECO
AH
SLEEP button
The function "SLEEP" automatically adjusts the
temperature to make the room more comfortable during
the night. In cooling or dry mode, the set temperature will
automatically raise by 1 every 60 minutes, to achieve a
total rise of 2 during the first 2 hours of operation.


Remote control
ƽ
SWING button
button
ƽPress it to decrease temperature / time setting.
Names and functions of wireless remote control
Operation of wireless remote control
button
ƽ Press it to increase temperature / time setting.
Press this button,can set up the temperature, when unit is
on. Centigrade setting range : 16-31
with multifunction; For some function, which the model dosen't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
Notice: This is a general use remote controller, it could be used for the air conditioners
DISPLAY button
MODE TIMER
FAN SLEEP DISPLAY
SWING SWING
MUTE
I FEEL
TURBO
HEALTH
ECO
AH
SWING : Control of the air flow.
It is possible to position the direction of the air in the
optimal.
The air outlet flow is uniformly distributed in the room.
The key activates the "FLAP" the air flow is
SWING
ƽ
the air flow is directed alternatively from left
to right. The symbol appears on the display.
SWING
ƽ
ƽ
directed alternatively up to down. The symbol appears
on the display.
The key activates the motorized "deflectors"
ƽ
ƽ
TURBO button
the maximum cooling temperature with 16 .
The symbol appears on the display.
To switch on/off the LED display
MUTE button
ƽChoose the lowest wind speed
I FEEL button
ƽWhen the “Feel” mode is selected, the operation
mode and initial temperature set are determined
by the initial room temperature at start-up of the
operation except to turn off the air conditioner and
operates it again. The symbol appears on
the display
Initial Room
Temperature
Initial Set
Temperature
COOLING RT=26℃23℃
DRY 26℃>RT≥20℃RT-2℃
MODE
HEALTH button
ƽ Press this button, the symbol appears
on the display. (This function does not exist.)
MODE + TIMER button
ƽTo activate the function of Child Lock when press
MODE and TIMER buttons together.
In cooling mode, press this button, the unit will give

Operation of wireless remote control
Take out the old batteries. (As show in figure)
Install the bateries according the direction (+and-) shown on the remote
controller.
Attach the back cover of wireless remote control. (As show in figure)
When changing the batteries, do not use the old or di rent batteries,
If the wireless remote control will not be used for a long time, please
otherwise, it can cause the malfunction of the wireless remote control.
take them out, and don't let the leakage liquid damage the wireless
remote control.
The operation should be in its receiving range.
It should be placed at where is 1m away from the TV set or stereo sound sets.
If the wireless remote control cannot operate normally, please take them out,
after 30s later and reinsert, if they cannot normally run, please change them.
Sketch map for
changing batt eries
NOTE:
Changing batteries and notices
12
3
INDOOR UNIT DISPLAY
No.
Led Function
3
1
2
Temperature display /Error code (1) Lights up during Timer operation when
the air conditioner is operational
(2)Displays the malfunction code when fault
occurs.
SLEEP mode
Lights up during Timer operation.
SLEEP
TIMER
To switch off the unit, you just need to press the
button again
2.
Remove the battery cover plate from the rear of the remote controller, by sliding it in the direction of the arrow.
