Anolis ArcLine Mini Outdoor 9 User manual

1
User instructions
ArcLine Mini Outdoor 9/12/18/27/36
The product generates colored light by means of high power LEDs.The product was designed for interior and
exterior use and it is ideal for locations where signaling,directional or e󰀨ect lighting is required.
1.Attention
Consider the respective national norms during the installation!
Do not install the unit near naked ames.
Avoid using the unit in locations subject to possible impacts.
Do not attempt to dismantle or modify the unit.
Do not install the module in badly ventilated location
Avoid looking directly into the LED light beam at close range.
2.Installation
The ArcLine Mini Outdoor unit should be connected to the ArcPower 36/72/144/360 or the ArcPower 384 Rack
mount (set at 350mA). See their user manuals for full details of mains power requirements and DMX operation.
For fastening the ArcLine Mini on the wall (at surface etc) are intended two L-brackets with mountings holes
of diameter of 5 mm each. Adjusting screws on both sides of the ArcLine Mini unit allow to set desired position
in tilt movement.
The ArcLine Mini Outdoor unit can be arranged in any position orientation.
Only one LED module can be connected to the LED output of the ArcPower driver.
If you need to connect more than one LED module to the ArcPower driver, you have to use the ArcLine Mini
Outdoor IN/OUT version. The last LED module has to be this standard ArcLine Mini Outdoor - see the ArcLine
Mini Outdoor IN/OUT user manual. Do not overload LED output of the ArcPower driver.
3.Connections
1. ArcLine Mini Outdoor

2
2. Adapter cable Chogori -RJ45 (it is not a standard part of delivery), for indoor use only
3. Adapter cable Chogori -Chogori (it is not a standard part of delivery)
4.Technical specications
LED device: Luxeon Rebel
Number of LEDs: 9/12/18/27/36
Max input current (per colour ): 350 mA
Maximum power consumption: 10.2W/ 13.6W/ 20.4W/ 30.6W/ 41W
Comp. power supplies : ArcPower 36/72/144/360/ ArcPower 384 Rack Mount
Typical Lumen maintenance: 70%@ 60,000 hours
LED life expectancy: minimum 60,000 hours
Beam angle (RGB variant) 127°x119°
Beam angle (WW or CW variant) 115°x113°
Operating ambient temp.range: -20°C/+40°C
Surface temperature: 40°C@25°C ambient
Ingress Protection: IP 67
Cooling system: convection
Construction:
Body Extruded Anodized Aluminium
transparent cover silicone
Weight: 0.19kg/ 0.25kg/ 0.38kg/ 0.57kg/ 0.77kg
Cable: Igus CF9.03.04, length=0.5m
Connector: Chogori CGRBDU 08BMMA-SL8001, IP67 (male)
Dimensions (mm)

3
5. Accessories
1x Chogori connector CGRBDU-08BFFA-SL8001 (female), IP67
6. Optional Accessories
(P/N 13051960) Adapter cable CGRBDU-08BFFA/ CGRBDU-08BMMA, L=3m, IP67
(P/N 13051966) Adapter cable CGRBDU-08BFFA/RJ45, L=0.25m , for indoor use only
Version 1.7 CE
Specications are subject to change without notice
26/07/2018
Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic