Anour DIVAR User manual

DIVAR - MANUAL
Please, read our instructions before installing and using the product.
If you have any problems with the electrical installation, contact an electrician. Be sure to turn off the power
before you start the installation. In some countries, all electrical installation must be carried out by professional
electricians only. For further information, contact the relevant authorities. Our products are for indoor use
only. Check on a regular basis that the cord and other parts are not damaged. In this case, the product must
not be used. Save these instructions for future use.
We use LED as a light source for our products. For replacement of LED contact Anour. The product should not
be dismantled as it may get damaged. The product should not come into direct contact with water.
Our products are marked with the symbol of the crossed out wheelie bin. That means that the product
should not be disposed of with other household waste. Our products must be recycled in accordance with
local environmental regulations for the disposal of waste. In complying with this you will help to minimize
.ruonAtcatnocesaelpsnoitseuqynaevahuoyfI.htlaehlatnemnorivnednanamuhnotceffeesrevdayna
[e-mail] (June 2019)
DIMENSIONS
EQUIPMENT
STANDARD INSTALLATION with cord and plug in power supply
- Quick tap on the button on
brighten or dim.
- Double tap: for max or min
brightness
If the button does not
for the duration of 30 sec and
try again.
WALL
The standard version of the Divar
wall lamp comes with a 2m cord
and a plug in power supply (EU or UK)
Power supply EU / UK
x1-3* x1-3* x1-3* x1-3* x1-3* TX20 Ø 6 mm
(2) (3)
(1)
x cm*
(4)
~ 50 mm
(5)
Tighten the bolt gently.
Leave approximately 2mm.
IMPORTANT!
500
150
65
62 62
1000
1500
2000
2500
3000
900
300
300
300
300 300950950
300 30012001200
3001400
300
300400
150
200

DRIVER:
LxHxW : 274 x 25 x 30 mm
DALI DRIVER:
LxHxW : 274 x 25 x 30 mm
DRIVER:
LxHxW : 274 x 25 x 30 mm
WIRE
+/- 10 meters
WIRE
+/- 10 meters
WIRE
+/- 10 meters
230 V 230 V
DALI
1-10V
230 V
TOUCH DIMMER
BUTTON
WIRE
+/- 10 METERS
WIRE
+/- 10 METERS
DIVAR - OPTIONS
The standard version of the Divar wall lamp comes with a 2m cord and a plug in power supply. If you wish to have an external power supply and a
dimming system integrated in your wall installation, we oer 3 dierent options. If you wish one of those options, please mention it on your order
request. Please consult a qualied electrician with regards to proper electrical connection.
OPTION 1 : WITH DIMMER ON THE LAMP
Wall installation schema Wall installation schema Wall installation schema
OPTION 2 : DALI (external dimming) OPTION 3 : 1-10V (external dimming)
+
[e-mail]
(June 2020)
DIVAR MODEL
DRIVER BUILT INTO THE WALL
CORD
230 V
TOUCH DIMMER
BUTTON
Please consult a qualied electrician with
regards to proper electrical connection.
PRI
220-240V
SEC
DRIVER
+
-
+
-
DETAIL A
BLUE
BROWN
DETAIL A
WIRE
+/- 10 METERS