Anova A1031 User manual

anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
• Power Drill
• 1/8" Drill Bit
• Phillips Head Bit
Assembly Instructions
A1031 - Surface Mount Kit for the Plank Collection
COMPONENT PARTS:
ASSEMBLY HARDWARE: All hardware is stainless steel.
(14) 1.25" #8 Screws
(2) Front Foot Mounts (2) Rear Foot Mounts
ASSEMBLY:
Inspect the shipping container contents for damage and to
determine that all components and hardware are present.
1.
2. Lay all parts on a so work surface or on the shipping
packaging to prevent damage to nish.
NOTE: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be applied
to the screw threads.
1

Manufactured in the U.S. 2
Note: Please contact Customer Care at 1-866-797-1761 when ordering replacement parts.
Copyright 2021 ANOVA®9/24/2021
3. Drill pilot holes into the feet of the chair using the 1/8" drill
bit, taking care to not go past 1.25". Then attach the front
and rear mounts using the #8 screws, with the countersinks
on the mounts facing downward and bolt holes going
toward the center of the chair.
Rear Mounts
Front Mounts