Ansjer C199W4 User manual

Quick Start Guide
Wireless Smart IP Camera
DIY
Do-It-Yourself
ACCloud iOS Android

NB: This instruction takes android App as an example,iOS App is a slightly difference
Scan the QR Code or search ACCloud
(in App store or Google play) to download
the free app, install it on smart phone
● Start the mobile app “ACCloud”
● Click “Register ” in the bottom of interface
●Enter phone number to get validation code, click Next to enter email box, password, then save it.
NB: 1.Register by mobile phone number can get validation code automatically,
while need to get into Email box to find code if register by email box.
2.Email box is used to retrive password when it is forgotten.
Personal Account Registration
Login Interface Registration Login Password Setting
ACCloud iOS Android
Smartphone Remote Monitoring
Download App

Login the app, get into the main interface (My Device), click + to add device, 4 different options of device
addition are available.
My Device Select Addition Method Wi Smart link
1. WiFi Smartlink
NB: All wireless cameras have to be connected to network via WiFi Smartlink for the first time.Do it as following steps,
●Turn on smart phone WiFi signal switch, and make it be connected to network
●Connect camera with power supply and wait for about 40 Seconds until ready to connect
●Login the App, select the device type (IP Camera or PTZ IP Camera)
●Click WiFi Smartlink, enter WiFi network password and start config (it can be configurated and connection succeed in
20-40 seconds)
●Returned to the interface of Add Device(if connection succeed), enter camera password (Default: admin), camera ---
name
●Click “√√” in the upper right corner to save
2. Manual Addition
NB: only working when camera has been connected to network via WiFi Smartlink
● Choose device type (IP Camera or PTZ IP Camera)
● Enter Device ID by manual(or scan UID QR code)
● Enter Password (Default: admin), device name
● Click “√ ” in the upper right corner to save
Add Device

3. Local Search
NB: only working when camera has been connected to network via WiFi Smartlink
● Choose device type (IP Camera or PTZ IP Camera)
● Turn on mobile phone WiFi setting, make it connect with the same LAN as Camera’s
● Click Local Search, Device ID will be displayed in a few seconds
● Choose the intended ID to add
● Enter password (Default: admin), Device name
● Click “√ ” in the upper right corner to save
4. RJ45 Cable Connection
NB: only working for outdoor bullet camera (with RJ45 Connector)
● Connect bullet camera with Router via RJ45 Cable
● Choose device type on App (IP Camera or PTZ IP Camera)
● Enter camera ID (by manual), password (Default: admin) and device name
● Click “√√” in the upper right corner to save
1. App Information
● Change password: change app login password
● Update App: update your app to the latest version
● Fingerprint login: no need to enter password if fingerprint touch function is available in your phone
2. Device Information
● Click to display QR Code of device UID ( in the left bottom conner)
● Video: Click to start recording or stop recording
● Screen Shot: Click to catch photo
● Event Playback: Records playback, (Motion detection video or full time video)
● SD/HD: Change video resolution(Standard Definition,High Definition)
● Intercom: Dual-Way talk if device support(Outdoor bullet camera does not support this )
NB: Screen touch is able to control direction moving if PTZ IP camera is connected
3. Device System Setting
● Change Password: Change the device password on App, the default password is admin
● Video Setting: Choose recording mode, switch off, Full time recording or Alarm Recording
● Alarm Setting: Motion switch on or off, and change motion detection sensitivity number
● SD Card Format: Indicates storage space and delete records
● Update Online: Click to update the camera firmware if new version is available
● Alarm Push Notification: Switch on to receive reminding message
App Function Introduction

My Prole Device Information Device Information Device System Setting
1.Q: Why failed to search the device when adding ?
A:Make sure if device connected to network via WiFi Smartlink ;
Make sure the device and mobile are in the same local area network
2.Q:Why the device is offline ?
A:Please check
● If device has been connected to Internet
● If Router working fine
● If DHCP server of Router turned on or not
3.Q:Why unable to find video recording?
A:Please check
● If SD Card is broken
● If searching period is valid
● If device system time is correct
4.Q: Why camera can not be connected to a different local area network ?
A: Please reset the camera( from reset hole or button on camera),
then retry via WiFi Smartlink.
FAQ:

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and
must not be co‐located for operating in conjunction with any other antenna or transmitter.