Anzzi KF-AZ034 User manual

ASME A112.18.1/CSA B125.1
The tools might be applied to the following places:
SINGLE HANDLE KITCHEN FAUCET
PART NAMENO.
1
2
3
4
5
6
Handle
7
8
9
10
11
12
13
14
15
16
17
18
19
Clamp
20
Lock nut
Rubber washer
Screw
21
Trim cap
Cartridge lock nut
O-ring
Body
Aerator core
Screw
O-ring
Cartridge
Flexible hose
Channel Locks
Adjustable Wrench
RECOMMENDED TOOLS
Attention:
for easy installation, you will need:
1.To read all the installation instruction completely before
beginning.
2.To read all the warning, attention and maitenance
information.
3.To purchase the proper supply lines.
Allen key
WARNING:
Please keep the
tool for future
use!
Goggles
Teflon tape
Basin wrench
Aerator washer
Spout
Wearing ring
22
23
24
25
Index
26
27
Plastic base
Ring
1
2
3
4
5
6
7
8
9
10
11
12
13 14 15 16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Aerator collar
Screw
O-ring
Connector
Cartridge adapter
Cover
Screw
Screw
Connector
Wearing ring
28
29
30
KF-AZ034
Step 4 Parts list
INSTALLATION MANUAL
1-844-44-ANZZI or visit www.ANZZI.com
Per fection is our Tradition
MT

Step 1 Faucet installation
2
1
3
HOT COLD
HOT COLD
1.Assemble the 2 flexible hose to the faucet by hand.
2.Put the faucet into the installation hole of the basin. Make sure o-ring be on the base of faucet. Assemble screw #27
to the base of faucet, and assemble rubber washer #25 and clamp #26 to screw #27. Then assemble lock nut #28 by
basin wrench to screw #27 to fix the faucet.
3.Connect the to water supply valve (not included), and tighten it with adjustable wrench.
DON'T OVER TIGHTEN!
Caution: make sure connect the hot and cold flexible hoses to supply valves correctly.
flexible hose
Warning:
The supply valves are not included, please purchase them in plumb shop.
O-ring
Step 2 Checking and testing
2
1
Step 3 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.
1.
water lines for one minute. Reinstall aerator by hand.
Remove the aerator by hand. Turn the faucet handle all the way on, turn on hot and cold water supply and flush
2.Check all connections at arrows for leaks, re-tighten it if necessary.
BUT DON'T OVERTIGHTEN
27
25
26
28