Apexis APM-JP8015-WS User manual

MJPEG series Plug & Play IP Camera instructions
1. Summarize
To visit the IP Camera via Internet, the users are required to do port forwarding in the
router, and configuration the Dynamic DNS. But under some internet environment,
even we finish the above settings we still can not visit the cameras via Internet.
Therefore we release Plug & Play IP Camera. We integrated all H series IP Cameras
with Plug and Play, no need port forwarding, no need Dynamic DNS, and only connect
to Internet, you can visit the video via internet.
2. Instruction
User may find
Please check the QR code on the item, as figure 1 at the bottom of camera
Figure 1 QR code
The IP cameras are default with DHCP, so user should connect the items to the
router to get the IP address.
If view by Android Smartphone, please install P2PCamLive app
software on your phones.
f view by iPhone Smartphone, please install P2PCamLive app

or ipcameraone software on your
phones.

Note: other functions are the normal use. More information, please refer to the
MJPEG series regualar user manual.
The iPhone/iPad App and Android mobile device setup are similar, this manual uses the
iPhone/iPad App as an example.
3. Operation steps
3.1 Mobile phone software installations
If you use iPhone, please Search and download P2PCamLive or ipcameraone APP on
APP STORE;
If you use Android phone, Please install P2PCamLive APP from the android market.
3.2 Connection
For the first time use, please power it up and then connect the camera to router with
network cable.
Figure 2
Tips:
Ensure the light of Ethernet indicator is on;
Make sure the router has enabled DHCP service function and has been connected

to the Internet
If the router enables the DHCP service, the camera can obtain IP address
automatically, users do not need to do IP configuration.
Such as Figure 2, if the PC is able to access to the Internet, it means that the
router has accessed to the Internet
If ISP directly offers Modem, it needs dial-up on the PC, when the user directly
inserts the camera into Modem, it doesn’t work ; ISP must open up the router
function in Modem, or buy another router to connect to the Modem.
3.3 Visit IP Camera
Make sure the smart phone has been connected to Internet by WIFI or 3G/4G.
Launch P2PCamLive on mobile phone.
If the smart phone & camera are in the Wlan or LAN network, user can Scan the
QR code by smart phone,then type Password (account : admin , the default
Password: 000000 ) as figure 3:
Figure 3
If the smart phone & camera are in the LAN network, user also can use app
software to search cameras, by showing the QR CODE (UID). Choose it, then type
Password (account : admin, the default Password: 000000 )
If the smart phone can not search the device, then user can add camera manually.
On the "ADD" list, type the QR CODE(UID) and Password, and setup a device
name to complete adding.
UID：On the Sticker, each camera has the unique ID number.User can scan QR
Code to get the UID very quickly.
Click the device, then can remote view, operates the Pan/Tilt by sliding the screen,
and setup audio as figure 4:

Figure 4 iPhone interface
On iPhone, click the arrow button on right top, to watch and setup configurations.
On Android, click the device for seconds, it will pop-up a dialog box, to watch &
adjust settings.
At the WIFI Setting webpage, user can set WIFI parameters manually. Pull out the
network cable after setting successfully, re-charge the camera, finally camera can
access to wireless Router via wifi.

Touch to listen to or speak through the camera.
Listen: Touch to hear what happens near where the camera placed.
Speak: Touch to speak through the camera.
Mute: Touch to mute the audio.
Dismiss: Touch to go back to the video screen.