APPENDIX High speed dome camera User manual

Intelligent High Speed Dome
Installation Manual
Version：V1.02
Before using the product, please carefully read the
manual and the maintenance of this manual for future use

2
The products factory serial number will be stamp
on the bottom and the back. Please fill the factory
serial number in the blank space below, and
properly preserve this statement in order to check
when necessary.
Style number: ________________________
Factory serial number: ___________________
The flashing arrow in the symbol is used to remind
the user, the large non-insulated "dangerous
voltage" near will produce an electric shock on the
human body.
The notice mark used to remind the users all the
instructions for important operation and
maintenance on this product.
47
Appendix 4 After-Sales Service Promise
Dear Users:
Thank you for your confidence to our company brand. To make you feel
more efficient, convenient and comfortable to our products, our
company makes the following servicing promises:
1. Quality Warranty
The products are complied with the requirements of purchase-sale
contract completely. It is manufactured in accordance with the latest
standard. And we have a strict testing for the products before leaving
the factory.
2. After-Sales Service During The Warranty Period
The manufacturer should be in charge of maintenance according to its
regulation if it belongs to designing problem; Two-year guarantee, the
first year-carry out in accordance with regulation; The second year-free
of charge. You can rest assured about our products’ quality: solve the
regular problem within 24hrs; difficult problems within 48hrs; serious
problems within 72hrs.
3. After-Sales Service After Warranty Period
With the sufficient stock of accessories, we are responsible for
maintenance to make our clients use it again in short time during the
whole applying period after two-year guarantee. The guarantee period
of accessories is ranging from 3 months to 10 months and our clients
will be given due attention with their demand (having the priority).

46
Appendix 3 Line and Transmission Distance
Table
Line (mm)
distance(m)
power(VA) 0.8000 1.000 1.250 2.000
10 283(86) 451(137) 716(218) 1811(551)
20 141(42) 225(68) 358(109) 905(275)
30 94(28) 150(45) 238(72) 603(183)
40 70(21) 112(34) 179(54) 452(137)
50 56(17) 90(27) 143(43) 362(110)
60 47(14) 75(22) 119(36) 301(91)
70 40(12) 64(19) 102(31) 258(78)
80 35(10) 56(17) 89(27) 226(68)
90 31(9) 50(15) 79(24) 201(61)
100 28(8) 45(13) 71(21) 181(55)
110 25(7) 41(12) 65(19) 164(49)
120 23(7) 37(11) 59(17) 150(45)
130 21(6) 34(10) 55(16) 139(42)
140 20(6) 32(9) 51(15) 129(39)
150 18(5) 30(9) 47(14) 120(36)
160 17(5) 28(8) 44(13) 113(34)
170 16(4) 26(7) 42(12) 106(32)
180 15(4) 25(7) 39(11) 100(30)
3
Content
Safety Announcement.............................................................................. 4
Attentions................................................................................................. 5
Functions and Features ............................................................................ 6
Special Use for Preset Point .................................................................... 7
Dome Installation .................................................................................... 8
Installing Preparation............................................................................... 9
Installation Steps.................................................................................... 10
Dome Setting ......................................................................................... 11
DIP Switch Settings............................................................................... 12
Basic Function Operation Settings ........................................................ 17
Menu Hint...................................................................................... 19
Main Menu Function Setting ......................................................... 20
System Setting ............................................................................... 20
Camera Parameter.......................................................................... 23
Pantilt setting ................................................................................. 32
Information Display Figuration ..................................................... 41
Technical Specifications ........................................................................ 42
Fault Analysis ........................................................................................ 43
Appendix 1 Lighting-proof, with Surge-protector................................. 44
Appendix 2 RS485 Bus Common Sense ............................................... 45
Appendix 3 Line and Transmission Distance Table............................... 46
Appendix 4 After-Sales Service Promise............................................... 47

4
Safety Announcement
1. Please read the manual carefully before the installation;
2. Shall be subject to all the warnings；
3. Shall comply with all instructions and the manual;
4. To avoid failure, please use the recommended accessories;
5. Use the indicated power supply line and voltage；if the location of
power and voltage is not clear, please contact with the dealer；
6. To prevent electric shocks, do not separate screws or housing. The
professionals must prepare all the component of the machine. As
for the maintenance, qualified experts should carry it out.
7. Do not use it as you like, to avoid striking and shocking, be sure to
use or store it appropriately.
8. Please use dry and soft cloth to clean it when it is dirty. If seriously
dirty, please use moderate detergent. Pay more attention to its
appearance while cleaning and erase the remains.
9. Please contact with the sales on the bellow conditions:
a) Power, control line damaged
b) Dropped or cover damaged
c) Abnormal performance
d) Can’t work according to the manual instruction
e) Damp or fall into water
f) Camera image interference
g) Out-cover damaged
10. Please use the same function parts or components provided by the
sale while replacing to prevent damage；
10
Installation Steps
1. Wall Mount Installation Steps:
1）position for digging hole on the wall, and install expansion screw.
Make the cover parts guide line through the bracket to the wall bracket,
and fix the M6*16 screw. (as picture 3)
Picture 3
2. Pendant Mount Installation steps:
2）position for digging hole on the wall, and install expansion screw. Fix
connector with M6*16 screw, make the cover parts guide line through
the bracket to the pendant bracket, fix the whole set to the ceiling. (as
picture 4)
Picture 4

44
Appendix 1 Lighting-proof, with Surge-protector
This product adopts air discharge lightning and TVS board-level technology; can
effectively prevent damage to equipment from 1500W (below) instantaneous
lightning strike, waves. However, make necessary protective measures under the
electrical safety for outdoor installation:
zSignal lines must keep at least 50 meters with high-voltage transmission
lines or high voltage cable;
zOutdoor wiring must be selected along the roof down;
zFor the open area must be sealed by pipe buried wiring, and pipe using
point grounding, absolute prohibition of overhead wiring;
zStrong thunderstorms area or areas of high-voltage sensor (such as
high-voltage substations), power must be taken to install additional
equipment and lightning rod and other lightning protection measures;
zOutdoor installations, lightning protection and grounding circuit design
must consider building lightning protection requirements, and comply with
the relevant national standards, industry standards;
zEquipotent grounding system must be. Grounding system must meet the
anti-jamming devices and electrical safety double requirements, and may
not be short-access or mixed access with the strong zero grid line. When
separate grounding systems, anti-resistivity less than 4Ω, grounding wire
cross-sectional area must be not less than 25 mm ²;
5
Attentions
1. Don’t expose the camera to rain or moisture (except outdoor
used model)
It is designed inside of the house, so be sure to avoid rain and moisture.
Turn off the power supply and maintain it by qualified person. The
moisture may affect the cameras and lead to electric risk..
2. Don’t aim at the sun
Be sure not to aim it at the sun or any other bright objects, whether in
use or not. Alternatively, it may cause the picture unclear.
3. Avoid exposing it to the light source or hard light too long
If the facular appears on the screen due to the light source, the image
may fade to some extent.
4. Avoid installing it reversely
It’s designed for ceiling or wall mount. So if installed upside down, such
as installing on the floor, it may cause it out of order.
5. Please use it according to the required temperature and
humidity
Don’t use it under the circumstance of high temperature or humidity.
Leave it away from heat-generating equipments, such as warm vapor,
stove and so on.
6. Placing it away from air-conditioner’s entrance point
The lens may generate fog due to the water condensing under the
following circumstance:
a) Quick changes from high to low temperature caused by
opening/closing the door occasionally
b) Used where the glasses can generates fog.
c) Used in the house full of smog or dust.
If the lens covered with fog generated by water condensing, put the
cover down and clean the appearance with a piece of soft cloth.
7. Consumer Goods
Some components, such as lens drive motor, cooling fan motor, built-in
sliding loop may be wear out due to long-term using. Concerning its
update and maintenance, please consult to maintenance center.
8. Don’t make it point to the same object too long
If so, the object’s shadow will appear on the screen.

6
Functions and Features
1. Built-in decoder
zDigital design, data will not be lost while power fails.
zWith recovery, function while turning on the users can run it as you like.
zSupport 200 presets, 4 preset patrolling scanning routes, each contains 24
presets, and the presets can be separately programmed
z4 patterns, each can be recorded for 100 different running track, including P/T
or lens’ operation and camera control.
zSupport 4-auto scan.
zSoft and hard ID setting can be edited on the DIP switch and inner menu.
zIntegrated multi-protocol control: PELCO“P”, PELCO“D”.
zSupport auto leisure function.
zSupport 8 privacy zones setting in maximum.
zProportional zoom lens, P/T speed and depth of zoom lens will decrease in
proportion.
2. Integrated assembling design, built-in P/T
z6-inch transparent cover, black and non-transparent rotation dome, ensuring
safety monitor.
zInside / outside various installment methods.
zHorizontally controlling speed 0.5º-240º/s.
zVertically controlling speed 0.5º-220º/s.
z360º continuously horizontal rotation, all-direction monitor.
zComply with IP 66/CE standard.
zBuilt-in surge protection device
3. Built-in zoom lens, integrated digital color camera of high
sensitivity and Resolution
zMany high-resolution cameras of various models provided by different
manufacturers can be available.
zAuto focus, manual priority.
zAuto iris.
zAuto shift from C-W/B
43
Fault Analysis
Attention：Some operation need to restart dome.
Failures Possible reason Resolution
Voltage out or
damaged
exchange
Power line
disconnection
modify
No action and no
image after power
on
Project network fault eliminate
Wrong video link modify
Bad video link eliminate
Successful auto
test but no image Camera damaged exchange
Mechanical failure eliminate
Tilt camera Put right
Abnormal auto test,
chirping sound,
image display Power not exchange
Wrong access control
line
modify
No set address reset
Successful auto test
but can’t control
Inconsistent baud rate,
protocol
reset
Bad video link eliminateInstable image
Power not exchange
Abnormal self test restart
Bad control circuit eliminate
Control operation
unusual
modify
Out of control
Over nodes, low
network quality, over
tran. distance
1, Inspection
terminator
2, Increase the
repeaters

42
Technical Specifications
Electrical indicator
Power DC12V/3A ±10%
Voltage ≤25W
Settings：
Protocol Pelco-P/D selectable
Baud rate 2400bps/4800bps/9600bps/19200bps selectable
ID address set 1－255（Soft address set）
Decoder Built-in
Level rotation 360°continuous rotation
Level speed 0.5°－240°/ seconds, adjustable maximum speed
Vertical rotation 0-90°Rotation, 180°auto rotation
Vertical speed 0.5°－220°/seconds,adjustable maximum speed
Working environment：
Temperature -20ºC ~50ºC
Humidity 0-95﹪non-condensing
Camera parameters:
Camera match A.I.S.:
HITACHI/SONY/SANYO/SAMSUNG/LG/CNB
CCD 1/4”
Scan way 2:1 Interlaced scanning
SNR ≥50dB
Signal format PAL
Synchr. Synchronization
Construction
Cover Aluminum
Installation Outdoor
7
4. Built-in OSD Menu
zBuilt-in multi-functional video OSD, functional parameters of
cameras and P/T function can be settable, with easy operation.
zSet 16 main subjects display
zBuilt-in direction display
Special Use for Preset Point
Call 95 PRESET（95+PRESET）―― Enter into main menu
Call 96 PRESET（96+PRESET）――Pattern scanning 1
Call 97 PRESET（97+PRESET）――Line scanning for preset point 1
Call 99 PRESET（99+PRESET）――Auto scanning

8
Dome Size and Bracket Installation Size
Dome Size (As picture 1)
Picture 1
Wall and Pendant mount bracket size (As picture 2)
Picture 2
41
Information Display Figuration
Various information display time could be set through this menu.
MAIN MANU DISPLAY CONFIGURATION
DOME TITLE
)Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose 【DISPLAY CONFIGURATION 】press
【OPEN】for confirm. Under【DISPLAY CONFIGURATION】choose
【DOME TITLE】and press【OPEN】for confirm.
3. Up/down P/T to modify Camera Title Display time.
4. Press【OPEN】for confirm, save and exit; press【CLOSE】exit
directly.
Instruction ：Preset point title，Area Indication ，Lens multiple
Indication，Direction Indication, system time and environment
index settings are the same as this one , you only have to refer to
it.
GLOBAL SETTING
Camera title，preset point title，area Indication，lens multiple indication，
direction Indication，system time and environment index display could
be operated at the same time through setting this function.
)Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose【DISPLAY CONFIGURATION】item, press
【OPEN】for confirm, Under【DISPLAY CONFIGURATION】choose
【GLOBAL SETTING】and press【OPEN】for confirm.
3. Press【OPEN】for confirm, save and exit; press【CLOSE】exit
directly.
【SYSTEM SETTING】
【CAMERA PARAMETERS】
【PANTILT SETTING】
【DISPLAY CONFIGURATION】
→DOME TITLE
PRESETS TITLE
ZOOM POSITION
DIRECTION INDICATOR
GLOBAL SETTING

40
HOME ACTION
From the time when the machine gets no any commands: if it still
receives no any orders at the set time, the dome camera will
automatically execute one function set by the users of the “Leisure Time
Functions”.
PANTILT SETTING HOME TIME
zHOME TIME
)Operations:
1. Call preset point 95 to enter main menu.
2. Up/down cursor to choose 【PANTILT SETTING】choose【HOME
ACTION】item and press 【OPEN】for confirm.
3. Under【HOME ACTION】choose【HOME ACTION】item and press
【OPEN】for confirm and enter into the leisure time setting item.
4. Up/down P/T to modify leisure time, 5~255 seconds are selectable.
5. Press【OPEN】for confirm, save and exit; press【CLOSE】exit
directly.
zHOME ACTION
)Operations:
1. Under【HOME ACTION】choose【HOME ACTION】item and press
【OPEN】for confirm and enter into the leisure setting item.
2. Up/down P/T to modify leisure function, 1-4 auto scan，1-200
preset point，1-4 patrol，1-4 mode route are selectable.
3. Press【OPEN】for confirm, save and exit; press【CLOSE】exit
directly.
【PANTILT SETTING】
【PRESETS SETUP】
【SEQUENCE SETUP】
【PRESETS SETUP】
【AUTOSCAN SETUP】
→【HOME ACTION】
→HOME TIME 255
HOME ACTION OFF
9
Installing Preparation
1. Basic Requirement
All electrical work must comply with the latest electrical
regulations, fire regulations and relevant laws and regulations;
In accordance with the packing list to check if the parts are
completed or not, determine the sites and installation applications
with the required match, if not, please contact the supplier;
Use this product under the required working environment.
2. Check the Hardness of the Installation Space and Place
To confirm the installation location has sufficient space to
accommodate the installation of this product and its structure;
Confirmed the ceiling, walls, brackets must be able to support the
installation of the dome and the total weight of the structure.
Requiring a 4-fold safety factor.
3. Preparatory for the Cable
Select the desired cable according to the transmission distance.
Video coaxial cable minimum specifications: (1) 75Ωimpedance;
(2) Full copper wire; (3) 95% braided copper shielding network.
Internal
style
International
style
Maximum distance
（feet\meter）
RG59/U RG59/U 760ft(229m)
5C-2V RG6/U 1,000ft(506m)
7C-2V RG11/U 1,500ft(457m)
4. Save All the Packing Material
Please keep the original packaging material, when problems occur,
can use it to send back to manufacturers or agents. Non-original
packing materials may lead to accidental damage in transit and
result in additional cost.

10
Installation Steps
1. Wall Mount Installation Steps:
1）position for digging hole on the wall, and install expansion screw.
Make the cover parts guide line through the bracket to the wall bracket,
and fix the M6*16 screw. (as picture 3)
Picture 3
2. Pendant Mount Installation steps:
2）position for digging hole on the wall, and install expansion screw. Fix
connector with M6*16 screw, make the cover parts guide line through
the bracket to the pendant bracket, fix the whole set to the ceiling. (as
picture 4)
Picture 4
39
3. Under 【PANTILT SETTING】choose【AUTOSCAN SETUP】and press
【OPEN】for confirming.
4. Under 【AUTOSCAN SETUP】press 【AUTOSCAN NUMBER 】for
entering into the auto scan number change setting and the parameter will
flicker.
5. Up/down P/T for setting.
6. Press【OPEN】for confirm, save and exit; press【CLOSE】exit directly.
zSET LEFT LIMIT
)Operations：
1. Under 【AUTOSCAN SETTING】choose【SET LEFT LIMIT】and
press 【OPEN】for entering into the scan left edge setting。
2. The vertical and horizontal position will be showed on the
downside of the screen when the users operate the machine. Press
【OPEN】when the scan left edge has been set and the system will
automatically record the current level position as the left edge on
scanning。
3. Press【CLOSE】exit directly。
Instruction：1. The scan left edge could be set at any point at the
360°horizontally；
2. The right edge setting is the same as the left, please
refer to the setting way of the left.
zDEFAULT SPEED
Adjust level scan speed, level 1-64 selectable.
)Operations:
1. Call preset point 95 to enter main menu.
2. Move cursor to choose【PANTILT SETTING】choose【AUTOSCAN
SETUP】item and press 【OPEN】for confirm to enter scan function
set item.
3. Under【AUTOSCAN SETUP】choose【DEFAULT SPEED】item and
press 【OPEN】for confirm to enter default scan speed set item.
4. Up/down P/T to change speed value, level 1~64 can select.
5. Press 【OPEN】for confirm, save and exit; press【CLOSE】and exit
directly.

4
Safety Announcement
1. Please read the manual carefully before the installation;
2. Shall be subject to all the warnings；
3. Shall comply with all instructions and the manual;
4. To avoid failure, please use the recommended accessories;
5. Use the indicated power supply line and voltage；if the location of
power and voltage is not clear, please contact with the dealer；
6. To prevent electric shocks, do not separate screws or housing. The
professionals must prepare all the component of the machine. As
for the maintenance, qualified experts should carry it out.
7. Do not use it as you like, to avoid striking and shocking, be sure to
use or store it appropriately.
8. Please use dry and soft cloth to clean it when it is dirty. If seriously
dirty, please use moderate detergent. Pay more attention to its
appearance while cleaning and erase the remains.
9. Please contact with the sales on the bellow conditions:
a) Power, control line damaged
b) Dropped or cover damaged
c) Abnormal performance
d) Can’t work according to the manual instruction
e) Damp or fall into water
f) Camera image interference
g) Out-cover damaged
10. Please use the same function parts or components provided by the
sale while replacing to prevent damage；
11
Dome Setting
1. System Connection
1) Dome System Chart (as picture 5)
Picture5
2) DIP Switch Chart (As picture 6)
Picture 6

12
DIP Switch Settings
Baud rate Setting SW2（B7~B8）
Protocol Setting SW2（B1~B6）
Remarks: “○”means OPEN status.
Switch Number
Protocol
FACTORY
PELCO-P ○
PELCO-D ○
Keep for
Update
37
enter the patrol number change setting and the parameter flicker.
5. Up/down P/T to choose.
6. Press【OPEN】for confirm, save and exit; press【CLOSE】exit
directly.
zEDIT SEQUENCE
)Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose【PANTILT SETTING】, press【OPEN】
for confirm and enter pan set menu.
3. Under 【PANTILT SETTING】choose【EDIT SEQUENCE】and press
【OPEN】for confirm, the ‘preset point-stay’ will be showed on
the screen.
4. Up/down P/T for setting the current parameter and the parameter
flicker.
5. Press【OPEN】for confirm, save and exit; press【CLOSE】exit
directly.
Instruction：Every group of parameters is form of two groups of numbers, the
first represent preset point number and the second for staying time. The
staying time for every preset point is decided by the default time when it
is not changed. The users could also set the staying time of every preset
point through current menu. Every patrol could set 32 preset points at
most.
PATTERN SETUP
The dome camera recording 1000 different actions continuously could be realized,
including pan control, routine control of the camera etc. The machine will move
according to the recorded running track. 4 mode functions can be set.
PANTILTSETTING PATTERNSETUP
【PANTILT SETTING】
【PRESETS SETUP】
【SEQUENCE SETUP】
→【PATTERN SETUP】
【AUTOSCAN SETUP】
【HOME ACTION】
→PATTERN NUMBER
TITLE
RECORD NEW PATTERN
RUN CONTINUOUSLY
DELETE CURRENT

36
3. Under 【PANTILT SETTING】choose【PRESETS SETTING】menu,
press【OPEN】for confirm.
4. Under 【PRESETS SETTING】choose【SET NEW PRESET】for
entering into the preset point setting.
5. Users could head the middle position right to the preset position by controlling
the dome camera. Press【OPEN】for confirm, save and exit; press
【CLOSE】exit directly.
Instruction: The preset point number should be select first before defining,
displaying and deleting the preset point or editing the title.
SEQUENCE SETUP
The set preset points could be arranged to the patrol tracking routes by
setting preset point patrol scan function, and the staying time of every preset point
could be set alone. The dome camera will call these points one by one in line with
the arranged order when preset point patrol scan is running, the dome camera can
record 4 preset point patrol scan routes at most and each can store 24 preset points.
PANTILT SETTING SEQUENCE SETUP
zSEQUENCE NUMBER
)Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose【PANTILT SETTING】, press【OPEN】
for confirm and enter pan set menu.
3. Under 【PANTILT SETTING】choose【SEQUENCE SETUP】and
press 【OPEN】for confirm.
4. Under【SEQUENCE SETUP】choose 【SEQUENCE NUMBER】to
【PANTILT SETTING】
【PRESETS SETUP】
→【SEQUENCE SETUP】
【PATTERN SETUP】
【AUTOSCAN SETUP】
【HOME ACTION】
→SEQUENCE NUMBER
DEFAULT DWELL
EDIT SEQUENCE
RUN CONTINUOUSLY
DELETE CURRENT
13
Address Setting SW1

14 35
This function could make the dome camera record the current level angel, hade
angel and lens multiple parameters and so on. The camera could turn to this
position quickly if it is required. It could support 200 preset points.
zPreset Number Setting
)Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down P/T to choose【PANTILT SETTING】, press【OPEN】for
confirm and enter pan set menu.
3. Under 【PANTILT SETTING】choose【PRESETS SETTING】menu,
press【OPEN】for confirm.
4. Under 【PRESETS SETTING】choose【PRESET NUMBER】menu
to enter to the preset point setting, and the parameter flicker.
5. Up/Down P/T to choose
6. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.
Instruction: If the preset point has been set and if it exists, the dome camera
will display it once for reminding its position.
zTITLE SETTING
)Operations:
1. Under 【PRESETS SETTING】choose【TITLE】for entering into
the title change menu, “Edit title of the preset point” will be
showed on the screen and the parameter flicker.
2. Up/down P/T for setting the current characters, about the details
please refer to the Title Setting of the Dome Camera.
3. Press【OPEN】for confirm, save and exit; press【CLOSE】exit
directly.
zSET NEW PRESET
)Operations:
1. Call preset point 95 to enter main menu.
2. Up/Down cursor to choose【PANTILT SETTING】, press【OPEN】for
confirm and enter pan set menu.

34
zSET NORTH DIRECTION
If execute this function, the system will automatically save the current position
of the dome camera as the north direction of it, and it will be regarded as the zero
point of direction, i.e. 0° level position..
)Operations:
1. Call preset point 95 to enter main menu..
2. Under 【PANTILT SETTING】choose【PANTILT SETTING】menu,
press【OPEN】for confirm and enter pan parameter set.
3. Under 【PANTILT SETTING】choose【SET NORTH DIRECTION】
menu, press【OPEN】for confirm and enter north setting.
4. Use the rocker to head the camera lens to the north direction
needed. Press 【OPEN】for saving. 【CLOSE】for return to the
upper grade menu.
zGOTO ZERO POSITON
If execute this function, the system will check the vertical and horizontal point
to make sure the dome camera could reset when accident happen.
)Operations:
1. Call preset point 95 to enter main menu.
2. Under 【PANTILT SETTING】choose【PANTILT SETTING】menu,
press【OPEN】for confirm and enter pan parameter set.
3. Under 【PANTILT SETTING】choose【GOTO ZERO POSTTON】
menu, press【OPEN】for confirm and enter to the zero point setting.
4. Press【CLOSE】for return to the upper grade menu.
Preset Point Setting Menu
PANTILT SETTING Preset Point Setting
【PANTILT SETTING】
→【PRESETS SETUP】
【SEQUENCE SETUP】
【PATTERN SETUP】
【AUTOSCAN SETUP】
【HOME ACTION】
→PRESET NUMBER
TITLE
SET NEW PRESET
SHOW NEXT PRESET
DELETE CURRENT
15

16
2. Line Connect Instruction:
Control line mark as picture 7.
Picture 7
Check the control cable, video cable and power cable connected in accordance with
the signals before the electricity to work the ball machine（as picture8）Attention：
Lines should connect strictly obey the chart!
Picture 8
Color Instruction
DC IN DC12V
Orange Earth line
Yellow RS485+(A)
Green RS485-(B)
33
auto-aperture while using auto-focus or auto-aperture, with only using
the rocker.
Focus：After choosing this item, it will just return to auto-focus mode while
using manual-focus or manual-aperture, with only using the rocker.
Aperture：After choosing this item, it will just return to auto-aperture mode
while using manual-focus or manual-aperture, with only using the
rocker.
)Operations：
1. Call preset point 95 to enter main menu.
2. Under 【PANTILT SETTING】choose【PANTILT SETTING】menu,
press【OPEN】for confirm and enter pan parameter set.
3. Under 【PANTILT SETTING】choose【JOYSTICK RECOVER】
menu, press【OPEN】for confirm and enter rocker recovery set.
4. Up/down P/T to change.
5. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.
zSPEED PROPORTIONAL
When in manual –adjusting mode, for the focal length is rather far, the picture
may move quickly if you just touch the rocker lightly due to the fast mile response
of the dome camera, which will cause image losing, and the pictures may easy to
shake when watch the nearer pictures.
When the Speed Matching is open, the speed of the pan will change in
proportion to the camera lens. The larger the amplification of the camera lens, the
slower the speed of the pan. Thus could keep the picture stay clear. When it reaches
the largest value, the speed of the pan will be 0.1°/s.
)Operations：
1. Call preset point 95 to enter main menu
2. Under 【PANTILT SETTING】choose【PANTILT SETTING】menu,
press【OPEN】for confirm and enter pan parameter set.
3. Under 【PANTILT SETTING】choose【SPEED PROPORTIONAL】
menu, press【OPEN】for confirm and enter speed matching set.
4. Up/down P/T to open or close this function.
5. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.

32
Pantilt setting
MAIN MENU PANTILT SETTING
PANTILT Set Menu
Set auto-flip, rocker recovery, the speed proportion.
PANTILT SETTING PANTILT Set
zAUTO FLIP
Push lens to the bottom (vertical) and still press on the pan, the lens level rotate
180° automatically and then upward rotate 90° to see the back view, to achieve full
180 ° vertical monitor.
)Operations：
1. Call preset point 95 to enter main menu.
2. Under 【PANTILT SETTING】choose【PANTILT SETTING】menu,
press【OPEN】for confirm and enter pan parameter set.。
3. Under 【PANTILT SETTING】choose【AUTO FLIP】menu, press
【OPEN】for confirm and enter auto flip set.
4. Up/down P/T to select and change. ‘On’ means open this function
and 90° vertical rotation；’Off’ means close this function and no
90° vertical rotation.
5. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.
zJOYSTICK RECOVER
Full-open ：After choosing this item, it will return to auto-focus and
【SYSTEM SETTING】
【CAMERA PARAMETERS】
【PAN TILT SETTING】
【DISPLAY CONFIGURATION】
→【PANTILT SETTING】
【PRESETS SETUP】
【SEQUENCE SETUP】
【PRESETS SETUP】
【AUTOS CAN SETUP】
【HOME ACTION】
→AUTO FLIP
JOYSTICK RECOVER
SPEED PROPORTIONAL
SET NORTH DIRECTION
GOTO ZERO POSITON
→【PANTILT SETTING】
【PRESETS SETUP】
【SEQUENCE SETUP】
【PATTERN SETUP】
【AUTOSCAN SETUP】
【HOME ACTION】
17
Basic Function Operation Settings
This operation and editing regulations just take our company control system as an
example, different keyboard manufacturers in the main menu to call the dome and
preset points of the dome are different, if you are using other operating systems
should be using the keyboard whichever the current operation method.
In addition, some functions of the camera is based on the integration movement of
SONY480, the different movements of different functions, the user in practice is
used by the current movement of equipment and in which the various movements of
the function will have no specification details, please refer to the manufacturer's
user manual for operating the camera.
zPower-on Self Test Display
Implement self-test procedure after power, and then the screen will show the dome
initial information as bellow:
zBasic Functions for Menu and Keyboard
The basic operations including: move menu bar, access to lower-level menu, return
to higher-level menu, select menu items, change the settings, and confirm to save or
cancel settings.
1. Keyboard Function Instruction:
【OPEN】Open iris order, enlarge iris when image choose. It means enter into
sub-menu or some item when it is dome menu edit, and save edit value
after programming.
【CLOSE】Close iris order, minish iris when image choose. It means exit
DOME ID 001
BAUD RATE 2400bps
PROCOTOL PELCO_D
CAMERA MODULE FCB-EX480CP
VERSION 0.03A

18
up-menu or some item when it is dome menu edit, and save edit value
after programming.
【FAR】Far focus, means focused far images.
【NEAR】Near focus, means focused near images.
【TELE】Pull lens near, It means enlarge lens’ enlarging zoom when it is image
choice.
【WIDE】Push lens far, It means minish lens’ enlarging zoom when it is image
choice.
P/T up：Camera up rotates; move up or change set when it is in the menu
settings. It means minish privacy zones up and down during privacy zone edit.
P/T down：Camera down rotates; move down or change set when it is in the
menu settings. It means enlarge privacy zones up and down during
privacy zone edit.
P/T right：Camera right rotates; It means enlarge privacy zones left and right
during privacy zone edit.
P/T left：Camera left rotates; It means minish privacy zones left and right during
privacy zone edit.
Remarks：Consistently operate P/T up and down order can up speed; When it is
the unset item on the menu up and down selection, cursor will pass
directly!
2. Menu Signal Instruction:
＞current cursor/current menu ,Number or Letter flicker means current selected
menu ，【Item Name】have sub-menu.
zMethods of Enter Into Menus
Call preset 95 to enter main menu, press number key 9, 5, and then ‘PRESET’ key.
31
3. Under 【CAMERA PARAMETERS】choose【PRIVACY_MASK】item,
press【OPEN】for confirm and enter privacy area set item.
4. Under 【PRIVACY_MASK】choose【MASK ACTIVATE】item, press
【OPEN】enter ON/OFF Privacy Zone setting.
5. Up/Down PT to change to activate or shut down the privacy protection
6. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.

30
2. When the dome is vertical down≥45°,this function can’t work, as
bellow：
zPrivacy Area Set
)Operations：
1. Call preset 95 to enter main menu.
2. Choose【CAMERA PARAMETERS】item, press【OPEN】for confirm and
enter camera set item. Under 【CAMERA PARAMETERS 】choose
【PRIVACY_MASK】item, press【OPEN】for confirm and enter privacy area
set item.
3. Under【PRIVACY_MASK】choose【SETUP NEW MASK】item, press
【OPEN】enter privacy area set.
4. Control and move dome, adjust grid center on the objects or location needed
to be sheltered. Press 【OPEN】for confirm, a little back privacy window
appear on the screen.
5. Adjust privacy window size according to practical requirement. Press
【RIGHT】,enlarge window left and right; press【LEFT】, narrow window left
and right; press【DOWN】enlarge window up and down；press【UP】narrow
window up and down.
6. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.
Instruction：All the dome privacy area set are the same, Choose privacy
protect number before operating definition, displaying and
deleting privacy protection.
zMASK ACTIVATE
)Operations：
1. Call preset 95 to enter main menu.
2. Choose【CAMERA PARAMETERS】item, press【OPEN】for confirm and
enter camera set item.
19
Menu Hint
SYSTEMSETTING
MAINMENU
CAMERA PARAMETERS
`
`
PANTILT SETTING
DISPLAY CONFIGURATION
【SYSTEM SETTING】
【CAMERA PARAMETERS】
【PAN TILT SETTING】
【DISPLAY CONFIGURATION】
→DOME TITLE
PRESETS TITLE
ZOOM POSITION
DIRECTION INDICATOR
ENVIRONMENTAL INDICATORS
GLOBAL SETTING
→【PAN TILT SETTING】
【PRESETS SETUP】
【SEQUENCE SETUP】
【PRESETS SETUP】
【AUTOS CAN SETUP】
【HOME ACTION】
→【LENS PARAMETER】
【EXPOSURE MODE】
【WHITE BALANCE】
【BACKLIGHT MODE】
【PRIVACY MASK】
→DOME ID 001
TITLE
LANGUAGE ENGLISH
CHANGE PASSWORD
FACTORY DEFAULT
SYSTEM RESTART
SYSTEM INFOMATION

20
【SYSTEM SETTING】
【CAMERA PARAMETERS】
【PAN TILT SETTING】
【DISPLAY CONFIGURATION】
【SYSTEM SETTING】
【CAMERA PARAMETERS】
【PAN TILT SETTING】
【DISPLAY CONFIGURATION】
Main Menu Function Setting
Main menu:
System Setting
MAIN MENU SYSTEM SETTING
DOME ID
Support soft and hard address modification, default is hard address. While all the 8
SWI are in “OFF” can modify soft address, and it can’t be changed while it is in
hard address status.
)Operations:
1. Call preset 95 to enter main menu.
2. Up/down cursor choose【SYSTEM SETTING】item, press【OPEN】
for confirm, enter system setting menu.
3. Under【SYSTEM SETTING】to choose【DOME ID】item, press【OPEN】
for confirm, enter dome serial number and input menu item, default serial
number shown.
4. Press【OPEN】to save and exit this item setting; Press【CLOSE】key exit
directly and no save。
→DOME ID 001
TITLE
LANGUAGE ENGLISH
CHANGE PASSWORD
FACTORY DEFAULT
SYSTEM RESTART
SYSTEM INFORMATION
29
→MASK NUMBER
SETUP NEW MASK
MASK ACTIVATE
SHOW NEXT MASK
DELETE CURRENT MASK
)Operations:
1. Under【CAMERA PARAMETERS】to choose【BACKLIGHT MODE】
and press【OPEN】to enter BLC mode set.
2. Up/Down PT to modify BLC value and open/close this function.
3. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.
zWDR MODE
This function can brighten the dark image while keeping the bright
image as usual and to obtain a more vivid color images at any place.
)Operations:
1. Under【Camera Parameter】to choose【Wide Dynamic Mode】
and press【OPEN】to enter Wide dynamic mode set.
2. Up/Down PT to modify or open/close this function.
3. Press【OPEN】key, save and exit; press【CLOSE】key, exit directly.
Instruction: Few domes cannot support this function.
Privacy Zone
Set privacy zone protection.
CAMERA PARAMETERS PRIVACY_MASK
Privacy protection can display a region on the screen. Users can set
regional coverage. This serial dome, Sony camera can support
maximum 8 privacy area (the size can be set). Masking block will move
with dome.
Remarks:
1. This function is associated with built-in camera models, different
camera models will make privacy protect window lightly various.
In addition, few cameras cannot support this function.
【LENS PARAMETER】
【EXPOSURE MODE】
【WHITE BALANCE】
【BACKLIGHT MODE】
→【PRIVACY MASK】