APPRO TECHNOLOGY LC--6760 User manual

CubeWiFiNetworkCameraLC6760 Quick Installation Guide
DESCRIPTION OF THE SURFACE
TheRearView:
TheFrontView:
1
2
3
4
56
7

1. CameraLen rea.s:Recordsvideoofthesurroundinga
2. StatusLED:Indicatesthecamera'scurrentstatus.
3. WPSStatusLED:IndicatestheWPSconnectionstatusofthe
camera.Whileconnecting,theblueLEDwillflash.
4. Microphone:Recordsaudiofromthesurroundingarea.
5. InfraredLED:Usedtoilluminatethecamera'sfieldofviewat
night.
6. PIRSensor:PassiveInfraredsensorformotiondetection.
7. ICRSensor:TheIR‐CutRemovablesensormonitorslighting
conditionsandswitchesbetweencolorandinfraredaccordingly.






DC-5V
ETHERNET
RESET
WPS
1
2
35
4 6
87

1. EthernetPort: ThisisastandardRJ‐45connectorfor10/100
MbpsEthernetnetworks.

2.
PowerConnector: ADC5Vinletthatconnectstoanexternal
powersupply.

3.
DI/DOConnector: I/Oconnectors forconnectingwithexternal
devices.

4.
ResetButton: Pressandholdthisbuttonfor10secondsto back
toitsfactorydefaultsettings.

5.
WPSButton: Pressthisbutton,thenpushandholdanotherWPS
buttononyourrouterfor5secondstosetupawireless
connectionautomatically.

6.
MicroSDCardSlot: InsertaMicroSDcardasitlocalstorage
includingrecordedimageandvideo.

7.
Speaker:Providesthecamera’saudiosignaloutput. 
8.
AdjustmentRing:Tightenorloosentheadjustmentringto
adjustthecamera'sposition.

Mount the Cube Camera
1. Placethemountingbaseanduseapenciltomarktheholes.Drilltwoholesorscrewswhereyoumarked.Fixthe
mountbasetotheceiling/wallwiththescrews.
2. Placethemountingbaseoverthescrewthatismountedonthewall.Makesurethebaseislocked.Placethebase
coveronthebaseandscrewthecamerastemclockwiseintothemountingbase.
Adjustthemonitoringdirectionofthecamera.Tightenthecollartolockcamerainplace.3.





1

Hardware Installation-with an Ethernet cable
TocreateanEthernetconnection:
1. Connectthepowercabletothecamera’sDCpowerjack.Then
connectthepoweradaptertoapoweroutlet.
2. ConnecttheEthernetcabletotheEthernetportlocatedontherear
ofthecamera.Thenconnecttheotherendintoyourrouter.
3. Confirmthecorrectnetworkconnectionstatus.Aftertheconnection
processiscomplete,theStatusLED(②)willturnsolidgreen.

Note
Refertothe“NetworkConfiguration”instructionsoftheUserManual,whichisontheincludedCD‐ROMtoconnectyourIPcameratoa
computeroranetworkwithaRJ‐45cableconfigurationforconnections.

Hardware Installation-with the WPS Push Button
Toc :reateaWPSconnection
1. Poweronyourcamera.
2. PressandholdtheWPSbuttonforabout5~6seconds.TheWPSstatusLEDwillflashblue(③).
3. PresstheWPSbuttononyourrouterwithin60seconds.Thecamerawillautomaticallycreateawirelessconnection
toyourrouter.Whileconnecting,theblueWPSstatusLED(③)willflash.Aftertheconnectionprocessiscomplete,
theStatusLED(②)willturnsolidgreen.
4. Confirmthecorrectnetworkconnectionstatus.Foradditionalinformationpleaserefertothe“Frequentlyasked
questions”websiteathttp://www.approtech.com/faq.php













Note
(1) IfyouarenotsurewheretheWPSbuttonisonyourrouter,pleaserefertoyourrouter’sUserManual.Ifyourrouterdoesnotsupport
ethoWPS,youhavetousethewiredconnectionm dasdescribedabove. 
(2) PleasemakesurethatyourroutersupportsWPS(Wi‐FiProtectedSetup)/QSS(QuickSecuritySetup),thenyoucanusetheWPSbutton
onthecameratoeasilycreateasecurewirelessconnectiontoyournetwork.
Onsomerouters,youmayneedtologintothewebinterfaceandclickonanon‐screenbuttontoactivatetheWPSfeature.
2

Install the Camera App- AppPro
PleasesearchfortheAppProappontheAppStoreorGooglePlayanddownloadittoyoumobiledevice.Ifyouhavea
QR‐codescanningapp,youcanscanthecorrespondingcodebelowtogostraighttotheapppage.




Add the Camera
o a.Tw methodstoaddanewcamer
1. ScanQRcodeonthecamera.
.Manuallytypeinthecamera’sDeviceIDandPassword(default:9999).
2


Add the Camera-- QR Code Scan
etoaddacamera. 1. ScanQRcodeofthecamera:YoucanjustscantheQRcod
2. Select“+”(Add)onthescreentoaddthenewcamera.
Note
(1) ToaddcamerabyscanningQRcodeonthecamera,pleasemakesurethatyourcamerahasbeenresettothefactorysettings.
(2) QR‐codescanmightnotsupportedbysomemobiledevice.Pleasevisityourphone’sapplicationstore(theGooglePlayorAppStore)and
downloadaQRcodereader/scannerappfirst.
AddCamera‐ AddCamera‐
heAndroidMobileScreen TheiPhoneMobileScreenT


QRCodeScan
ManuallyAdding
ManuallyAdding
QRCodeScan

Add the Camera—Manually Adding
1. Android:ManuallytypeinthecameraIDandpassword:Entertheinformationneededtoaccessyourdevice,suchas
theDeviceIDandPassword.Select“+”(Add)onthescreentoaddthenewcamera.
2. iPhone:ManuallytypeinthecameraIDandpassword:Entertheinformationneededtoaccessyourdevice,suchas
theDeviceIDandPassword.Select“ ”(OK)onthescreentoaddthenewcameraorclickon“ ”tocancel.
3

St t to Monitorar
.1. Android:Choosethecameraonthecameralist.Yourmobiledevicewillstartconnectingtoyourcamera
2. iPhone:Choosethecameraonthecameralist.Yourmobiledevicewillstartconnectingtoyourcamera.
T


heAndroidMobileScreen TheiPhoneMobileScreen
For the First Time Setup
Forthesafetypurpose,wesuggestyoucreateanewpasswordinplacetoconnecttothecamerawiththedefault
password(9999).FortheAndroiddevice,pleaseselectthe  toenterthecameraconfigurationsettingpage.Forthe
OSdevice,pleaseselectthei  toenterthecamerafunctionsettingpage.

 
TheAndroidMobileScreen TheiPhoneMobileScreen

TheCMS1030(CentralManagementSystem)Software
TheCMS‐1030softwareontheaccompanyingCDsupports32‐channelMPEG4,MJPEG,H.264viewing,recording,scanIPfunction,
authorityandeventmanagement,andremoteoperationsbyLANorInternet. 
TheCMS‐1030providesthemostuser‐friendlydesignwithfeature‐richfunctionsforintelligentsurveillancesystems.
RMN0101370 4