5. Adjust the suction and the pace
•Press the +/- to adjust the level.
•We recommend you to start pumping the milk with level 1 of suction and
pace for your first use.
•After you are familiar with the operation, you can adjust the level depending on
your situation and needs.
•When you need to release from milk engorgement, you can try a higher level of
suction.
•You can press the “M” button for longer than 2 seconds to switch between
“massage mode” and “pump mode”.
•You can change to “massage mode” after pumping to release your breast or
stimulate lactation.
7. Switching off
•When finish pumping, press the POWER button and unplug the adapter.
8. Cleaning
•Please clean the pump body, massage cushion, valve, bottle, teat, screw ring,
sealing disc immediately after every use.
•Cover, sealing ring, pedestal, and connection need cleaning every week.
•Attention: Clean the valve carefully not to break the tip.
Never use a brush or detergent to clean.
9. Sterilizing
•Please clean and sterilize all PP and silicone accessories. TIPS BELOW:
b. Steam sterilization by the microwave
•Please use sterilization containers for microwave sterilization
•Please sterilize in the microwave according to the information.
Attention: Please keep all parts dry after sterilizing
Please follow sterilzer instructions.
10. Storing milk
•Store the milk in either the fridge or freezer after collecting.
