Aqua PRO 04AL550 User manual

SUBMERSIBLE POND LIGHT
1W LED WARM WHITE
- INSTRUCTIONS -
DATE
JUNE 2023 WWW.AQUAPROONLINE.COM.AU
HOTLINE [phone] PHONE [phone]
EMAIL [e-mail]
MODEL
04AL550
                   

HOTLINE [phone] PHONE [phone] EMAIL [e-mail] WEB WWW.AQUAPROONLINE.COM.AU
1
2
3
CONGRATULATIONS ON YOUR PURCHASE
OF THIS PRODUCT BY AQUAPRO.
TECHNICAL SPECIFICATIONS
DESCRIPTION 1 LED WARM
VOLTAGE (V)
12
POWER (W)
1
CABLE LENGTH (m)
5
LUMENS
50
Please read these instructions and familiarise yourself with the equipment before placing it in service.
Correct and safe use of the system requires strict compliance with the safety instructions. For safety
reasons persons less than 16 years of age or people that are not familiar with these instructions should
not use this equipment
FEATURES
YOUR AQUAPRO LED GARDEN LIGHT HAS BEEN MANUFACTURED WITH ADVANCED
TECHNOLOGY AND QUALITY MATERIALS TO IDEALLY INTEGRATE INTO ANY POND
AND GARDEN SCENE, THANKS TO THEIR COMPACT DESIGN. thanks to their compact
design.
• The AQUAPRO light has a glass lens and is
suitable for use in or out of water.
• The high power energy ecient LED emits
a natural warm light providing years of
maintenance free satisfaction.
• The 240V transformer converts the power
supply to a safe 12V for peace of mind in your
pond or garden.
EXPLODED VIEW
1
2
3
4
Light Body
Weighted Base
Thumb Screw
Transformer
4
                   

HOTLINE [phone] PHONE [phone] EMAIL [e-mail] WEB WWW.AQUAPROONLINE.COM.AU
WATER FEATURE PUMP
INSTRUCTIONS
INSTALLATION
If required, have a qualified electrician install a weather proof power point near to the
pond or garden, within reach of the transformer and light.
• Mount the transformer in a dry and protected
location making sure that it can’t be wet by
either rain or reticulation. It is not waterproof
and do not submerge.
• For pond and garden installation slide the
weighted base into the circular recess on the
underside of the light body. Position the light in
the desired location taking care not to wet the
2 pin female plug at the end of the cable.
• Adjust the light until facing in the general
direction of the feature you wish to illuminate.
We recommend final adjustments be carried
out at night. Insert the 2 pin male plug on the
end of the light cable into the transformer
and tighten the locking collar firmly. The
transformer can now be turned on.
• Once in the correct position lock the light by
tightening the thumb screws, taking care not to
over tighten.
• There is minimal maintenance required with
PondMAX pond lights. The light should be
inspected on a regular basis to ensure the light
or cable is not damaged in any way. Clean
the lens on the light regularly for maximum
eciency.
MAINTENANCE
There is minimal maintenance required on the AQUAPRO LED pond lights. The light should
be inspected on a regular basis to ensure the light or cable is not damaged in any way.
Clean the lens on the light regularly for maximum eciency.
                   

WWW.AQUAPROONLINE.COM.AU
HOTLINE [phone] PHONE [phone]
EMAIL [e-mail]
IMPORTANT SAFEGUARDS WARRANTY
WARRANTY COVERS ONLY APPLIANCE
DEFECTS, FAULTY MATERIAL AND
WORKMANSHIP WITHIN A 2 YEAR PERIOD.
TO GUARD AGAINST INJURY, BASIC SAFETY
PRECAUTIONS SHOULD BE OBSERVED
INCLUDING:
• This product comes with a warranty against defects (Warranty). The
benefits provided in this Warranty are in addition to other rights and
remedies available to you under the Australia Consumer Law. The
Warranty is provided to the original purchaser of the product on the
following terms:
• The Warranty is given by Chemkay Pty Ltd trading as Aquatec
Equipment: Po Box 2087, Seville Grove, WA 6112; contactable by
phone [phone]) or email
(info@ aquatecequipment.com).
• To make a claim under the Warranty you must return the faulty
product to the place of purchase with a valid receipt or proof of
purchase.
• A Warranty claim must be made within 2 years of the date of purchase.
• If your claim complies with the above terms and the product is not an
Exhaustible Item and no Voiding Events have occurred, we will (at our
sole discretion):
- repair the product, if possible; or
- provide a replacement product; or
- if a replacement product is not available,
provide a refund for the purchase price paid.
• You will bear the cost associated with claiming under the Warranty such
as the cost of transportation and delivery of the product to and from
the place of purchase.
• The product contains a complete lens set and lens seal. These items
are exhaustible (Exhaustible Items) and are not covered under the
Warranty.
• The Warranty will be void if any of the following events occur, as
determined by us, at our sole discretion (Voiding Events):
- any tampering/removal of warranty
identification labels or electrical
components is evident;
- the defect has arisen due to: an accident,
incorrect or inadequate installation, misuse
or abuse of the product (including improper
maintenance and service), excessive wear
and tear, not following manufacturer’s
guidelines instructions, or the product has
been used in a manner contrary to the
purpose or suitability of the product;
- the product has been modified without our
authority;
- the defect is caused by power surges/
spikes brownouts.
• Loss of livestock, damage to property or personal injury caused by
the improper use or abuse of the product will not be covered and
the manufacturer excludes all liability for such events, to the extent
permitted by law.
• In addition to the Warranty set out above, our goods come with
guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a
major failure.
• The light should only be used in clean water. Do not
use the light in any solvent or flammable liquids. Do
not use in chlorinated or salt water.
• Do not operate the light if the light or any of the
components of the light such as the power cable or
AC Adaptor have been damaged.
• If the 240V plug supplying the AC Adaptor gets
wet, do not unplug the cord. Disconnect the circuit
breaker that supplies power to the power outlet.
Then unplug and examine the plug and power
outlet for presence of water. If the power outlet
has become wet, you should consult an electrician
before using the again.
• Always use a properly grounded power supply
that is connected to an RCD with a rated residual
operating current not exceeding 30mA as per AS/
NZS 3350.2.41:1997.
• Always unplug the light from the power supply when
not in use or before performing any maintenance.
Never pull the AC Adaptor cord to disconnect the
plug from the power supply. Grasp the plug and pull
to disconnect.
• Do not install or store the light where it will be
exposed to extreme hot or cold temperatures.
• Keep out of reach of children or pets. This appliance
should not be used by children or infirm persons
without supervision.
• Do not cut the cord as this will result in voiding your
warranty.
• Care should be taken to arrange the power cord so
that it cannot be accidentally tripped over or pulled.
• Do not attempt to repair the light yourself. Return
to an authorised service centre or place of purchase
if a fault occurs.
• Do not use in water above 35°C.
FOR MORE INFORMATION AND THE
COMPLETE AQUAPRO RANGE
VISIT WWW.AQUAPROONLINE.COM.AU
                   