AQUADIVE BATHYSPHERE 100 GMT User manual
O W N E R S M A N U A LO W N E R S M A N U A L
P2
BATHYSCAPHE 100 GMT
Welcome to the world of
AQUADIVE Watches!
This Owner’s Guide is designed to help
answer any question you might have about
the use and care of your Aquadive watch.
However, should you need further assistance,
or just prefer that “human touch”, don’t
hesitate to contact us!
SAFETY
Keep your watch a safe distance from young
children as the edges of the watch and the
strap’s buckle can scratch a child’s skin.
Do not wear your watch while operating
machinery with moving parts as your watch
could become caught in the gearing.
To ensure proper functioning and
timekeeping, please refer to the
maintenance manual.
O W N E R SO W N E R S M A N U A LM A N U A L
P2
BATHYSCAPHE 100 GMT
Welcome to the world of
AQUADIVE Watches!
This Owner’s Guide is designed to help
answer any question you might have about
the use and care of your Aquadive watch.
However, should you need further assistance,
or just prefer that “human touch”, don’t
hesitate to contact us!
SAFETY
Keep your watch a safe distance from young
children as the edges of the watch and the
strap’s buckle can scratch a child’s skin.
Do not wear your watch while operating
machinery with moving parts as your watch
could become caught in the gearing.
To ensure proper functioning and
timekeeping, please refer to the
maintenance manual.
O W N E R SO W N E R S M A N U A LM A N U A L
P4
BATHYSCAPHE 100 GMT
to begin wearing. Now that you have manually
wound the watch, your normal wrist and arm
movements will continue to generate power
reserve in the watch, literally "self-winding" it.
When fully-wound, your AQUADIVE should
have an average power reserve of 42 hours.
P3 Date & GMT Setting Position
To set the date:
Gently pull the crown once to Position 3 (P3)
and turn it anticlockwise to adjust the date.
In months with fewer than 31 days, you will
need to manually advance the date at the end
of the month.
IMPORTANT - Please do not manually
change the date when the hour hand is
between 10:00 PM and 2:00 AM. The
automatic date function of the watch is
actively engaged during this four hour period
(the pinions are being repositioned to carry out
the automatic date change), and by manually
engaging the date while the hour hand in this
four hour period it is possible to damage the
self-winding movement.
P1 NORMAL POSITION
(SCREWED-DOWN, NORMAL OPERATION)
Your AQUADIVE is equipped with a screw-in
crown that keeps your watch water resistant at
depths up to 1000 meters/3300 feet. Please
make sure the screw-in crown is screwed
down before submerging your watch in water.
The BATHYSCAPHE 100 is equipped with an
automatic (self-winding) movement that is
wound by the normal movement of your wrist.
Before you wear your AQUADIVE for the first
time (or after a long period of not wearing your
watch), you will need to manually wind it to get
it started. IMPORTANT – NEVER shake your
self-winding watch to get it started. This can
damage the movement.
P2 Winding Position
(for manually winding the watch)
To manually wind the watch:
Please unscrew the crown by turning it
counterclockwise. It will gently "pop" when
the crown has been completely unscrewed.
The crown is now in Position 2 (P2).
With the crown in Position 2 (P2) please
gently turn the crown 30 - 50 times in a
clockwise direction. This will sufficiently wind
the movement so that it has sufficient power
GETTING STARTED
P1 P2 P3 P4
O W N E R SO W N E R S M A N U A LM A N U A L
P4
BATHYSCAPHE 100 GMT
to begin wearing. Now that you have manually
wound the watch, your normal wrist and arm
movements will continue to generate power
reserve in the watch, literally "self-winding" it.
When fully-wound, your AQUADIVE should
have an average power reserve of 42 hours.
P3 Date & GMT Setting Position
To set the date:
Gently pull the crown once to Position 3 (P3)
and turn it anticlockwise to adjust the date.
In months with fewer than 31 days, you will
need to manually advance the date at the end
of the month.
IMPORTANT - Please do not manually
change the date when the hour hand is
between 10:00 PM and 2:00 AM. The
automatic date function of the watch is
actively engaged during this four hour period
(the pinions are being repositioned to carry out
the automatic date change), and by manually
engaging the date while the hour hand in this
four hour period it is possible to damage the
self-winding movement.
P1 NORMAL POSITION
(SCREWED-DOWN, NORMAL OPERATION)
Your AQUADIVE is equipped with a screw-in
crown that keeps your watch water resistant at
depths up to 1000 meters/3300 feet. Please
make sure the screw-in crown is screwed
down before submerging your watch in water.
The BATHYSCAPHE 100 is equipped with an
automatic (self-winding) movement that is
wound by the normal movement of your wrist.
Before you wear your AQUADIVE for the first
time (or after a long period of not wearing your
watch), you will need to manually wind it to get
it started. IMPORTANT – NEVER shake your
self-winding watch to get it started. This can
damage the movement.
P2 Winding Position
(for manually winding the watch)
To manually wind the watch:
Please unscrew the crown by turning it
counterclockwise. It will gently "pop" when
the crown has been completely unscrewed.
The crown is now in Position 2 (P2).
With the crown in Position 2 (P2) please
gently turn the crown 30 - 50 times in a
clockwise direction. This will sufficiently wind
the movement so that it has sufficient power
GETTING STARTED
P1 P2 P3 P4
O W N E R SO W N E R S M A N U A LM A N U A L
P6
BATHYSCAPHE 100 GMT
GETTING STARTED WITH YOUR
P3 Date & GMT Setting Position
To set the GMT Hand:
Gently pull the crown once to Position 3 (P3)
and turn it a clockwise direction to adjust the
GMT hand.
If for any reason you are unable to operate the
crown of your watch - please contact
AQUADIVE customer care immediately.
You can contact AQUADIVE Customer Care
P4 TIME SETTING POSITION
department by phone at:
TO SET THE TIME:
US customer support
(888)-397-9363 (3:00-7:00PM)
Gently pull the crown to the outermost
position (P4) and turn it counterclockwise until
UK customer support
you have the correct time. Gently push the
+44 2079936720 (9:00-5:00PM)
crown towards the case until you feel some
resistance. Still gently pushing the crown
EU and ROW customer support
towards the case, turn the crown clockwise
+43 660 5482248
(do not apply excessive force!), until the crown
is fully screwed down and in Position 1 (P1).
IMPORTANT:
ALWAYS be sure that the crown is fully
screwed down. Your watch will NOT be water-
resistant if the crown is not completely
screwed down and in position 1 (P1). Please
note that improper use/operation of the crown
will invalidate the warranty.
P1 P2 P3 P4
O W N E R SO W N E R S M A N U A LM A N U A L
P6
BATHYSCAPHE 100 GMT
GETTING STARTED WITH YOUR
P3 Date & GMT Setting Position
To set the GMT Hand:
Gently pull the crown once to Position 3 (P3)
and turn it a clockwise direction to adjust the
GMT hand.
If for any reason you are unable to operate the
crown of your watch - please contact
AQUADIVE customer care immediately.
You can contact AQUADIVE Customer Care
P4 TIME SETTING POSITION
department by phone at:
TO SET THE TIME:
US customer support
(888)-397-9363 (3:00-7:00PM)
Gently pull the crown to the outermost
position (P4) and turn it counterclockwise until
UK customer support
you have the correct time. Gently push the
+44 2079936720 (9:00-5:00PM)
crown towards the case until you feel some
resistance. Still gently pushing the crown
EU and ROW customer support
towards the case, turn the crown clockwise
+43 660 5482248
(do not apply excessive force!), until the crown
is fully screwed down and in Position 1 (P1).
IMPORTANT:
ALWAYS be sure that the crown is fully
screwed down. Your watch will NOT be water-
resistant if the crown is not completely
screwed down and in position 1 (P1). Please
note that improper use/operation of the crown
will invalidate the warranty.
P1 P2 P3 P4
O W N E R SO W N E R S M A N U A LM A N U A L
P6
BATHYSCAPHE 100 GMT
HRV
The AQUADIVE BATHYSCAPE 100 is
equipped with an automatic HRV (Helium
Release Valve) at the 6 o’clock position.
(Picture is to show HRV position on 100
model watches and the picture shown is not
the 100 GMT model)
HRV - Helium Release Valve
O W N E R SO W N E R S M A N U A LM A N U A L
P6
BATHYSCAPHE 100 GMT
HRV
The AQUADIVE BATHYSCAPE 100 is
equipped with an automatic HRV (Helium
Release Valve) at the 6 o’clock position.
(Picture is to show HRV position on 100
model watches and the picture shown is not
the 100 GMT model)
HRV - Helium Release Valve
O W N E R SO W N E R S M A N U A LM A N U A L
BATHYSCAPHE 100 GMT
WARRANTY
Every AQUADIVE watch is manufactured to Please email:
our word on it! and request an RMA form.
Your AQUADIVE watch is covered by a 2 year
(24 month) warranty. The warranty is in effect PLEASE – DO NOT SEND YOUR WATCH
from the date of purchase. WITHOUT A COMPLETED AND
APPROVED RMA FORM.
The AQUADIVE warranty covers the watch
against manufacturing defects. It specifically You will be given instructions on how to
excludes damage caused by misuse, package your watch for shipping, and where
accident, or neglect by the owner. to send it.
It also does not cover any unauthorized
service or repair.
The warranty does not cover the strap.
AQUADIVE, as the manufacturer, will solely
decide whether or not a watch shall be
repaired or replaced.
Should your AQUADIVE require servicing
during this time period, it shall be serviced
and returned to you at no additional cost.
P8
SERVICE
Your AQUADIVE watch requires regular
service to ensure its smooth operation.
We recommend a service interval between
3 – 5 years from the date of purchase. With
the service interval, your AQUADIVE will be
fully disassembled. The movement will be
removed, serviced, regulated and lubricated.
The gaskets and seals will be removed and
replaced with new ones. The watch will be
re-sealed and checked for water resistance.
The watch will be timed to ensure proper
regulation of the movement.
Please contact our service department to
arrange a service interval for you
AQUADIVE watch.
O W N E R SO W N E R S M A N U A LM A N U A L
BATHYSCAPHE 100 GMT
WARRANTY
Every AQUADIVE watch is manufactured to Please email:
exceed the Swiss Made standards - you have service@aquadive.com
our word on it! and request an RMA form.
Your AQUADIVE watch is covered by a 2 year
(24 month) warranty. The warranty is in effect PLEASE – DO NOT SEND YOUR WATCH
from the date of purchase. WITHOUT A COMPLETED AND
APPROVED RMA FORM.
The AQUADIVE warranty covers the watch
against manufacturing defects. It specifically You will be given instructions on how to
excludes damage caused by misuse, package your watch for shipping, and where
accident, or neglect by the owner. to send it.
It also does not cover any unauthorized
service or repair.
The warranty does not cover the strap.
AQUADIVE, as the manufacturer, will solely
decide whether or not a watch shall be
repaired or replaced.
Should your AQUADIVE require servicing
during this time period, it shall be serviced
and returned to you at no additional cost.
P8
SERVICE
Your AQUADIVE watch requires regular
service to ensure its smooth operation.
We recommend a service interval between
3 – 5 years from the date of purchase. With
the service interval, your AQUADIVE will be
fully disassembled. The movement will be
removed, serviced, regulated and lubricated.
The gaskets and seals will be removed and
replaced with new ones. The watch will be
re-sealed and checked for water resistance.
The watch will be timed to ensure proper
regulation of the movement.
Please contact our service department to
arrange a service interval for you
AQUADIVE watch.
O W N E R SO W N E R S M A N U A LM A N U A L
Table of contents
