View of inflatable (bottom up) with
DinghyRacks installed in proper locations.
End view of inflatable (bottom up) with
DinghyRack installed in proper location under pontoon.
Inflatable secured to bow with line or bungees.
Secure to bow the best way for your boat.
DinghyRack DinghyRack
DinghyRack
DinghyRack DinghyRack
DinghyRack
DinghyRack
bottom of inflatable
bow
patent pending
Installing the DinghyRack is easy and does
not require any holes to be drilled into your bow.
The DinghyRack is designed to be installed
upside down on the bow of your vessel.
When properly installed, the DinghyRack
system prevents oar locks and transom from
damaging your bow.
DinghyRack brackets should be placed as
shown in Figure 2 or Figure 3. One DinghyRack
bracket is placed on the inflatable bow and the
other two are placed on the side pontoons just
inside the transom plate.
Figure 1 shows the proper position of one
DinghyRack bracket installed on the pontoon.
Your DinghyRacks are now installed and your
inflatable is ready for securing to the bow with
rope or bungee cord attached to existing cleats.
Made of durable, marine grade foam your
DinghyRacks will provide years of service
with normal care.
Thank you for purchasing our product.
Fig.1
Fig.2
Fig.3
www.dinghyrack.com
Item No. DR-3
