araknis AN-ACC-AP-O-TILT User manual

Box Contents
• Tilt Mount (assembled)
• Hex Wrench
• 8 Wall Mounting Screws (Tap Screw M3.5x25)
• 8 Concrete Anchors (5mm)
• Bracket Screws (M4x10)
• Wall Mounting Template
Product Details
• Only for use with Araknis Outdoor WAPs.
• Compatible with AN-ACC-AP-O-POLE for mounting on poles 1.5–3.1” in
diameter.
• Made from powder-coated aluminum, with stainless steel components.
• Weight: .902lb (without access point)
• Vertically and horizontally adjustable up to 45°.
Quick Start Guide
AN-ACC-AP-O-TILT
Tilt Mount for Outdoor Access Point
Page 1/2©2018 Araknis Networks® AraknisNetworks.com
Assembly Instructions
45°
45°

Page 2/2 180201-0350©2018 Araknis Networks®
Installation Guidelines
• Aim the cable feed away from the open environment.
•Ensure that cable loops down and back up as it enters the connection area (rear
or bottom entance). This provides a harmless path of least resistance for any
water that strikes the access point and mount.
• We recommend at least shielded Cat 5 cable for outdoor installation.
• Ground the cable using the AC ground of the PoE interface.
Angle the mount as needed to provide the
access point’s best coverage in the target
area.
See the propagation insert (supplied with
your access point) to determine the best
angle.
Contacting Technical Support
866-838-5052
[e-mail]
2-Year Limited Warranty
Araknis Networks® products have a 2-Year Limited Warranty. This warranty
includes parts and labor repairs on all components found to be defective in
material or workmanship under normal conditions of use. This warranty shall
not apply to products that have been abused, modified, or disassembled.
Products to be repaired under this warranty must be returned to SnapAV or
a designated service center with prior notification and an assigned return
authorization (RA) number.