Alpine 498-4 User manual

Thank you for purchasing the Alpine Industries Mop and Broom Holder, 4 holders and 5
hooks! This holder can secure handled-tools such as brooms, mops, etc. The silicone
holder allows them to be easily stored and removed quickly.
NOTE
Recommended for indoor and outdoor use-Select an area of a wall that does
not have electrical conduits or plumbing inside.
Never attempt to use as hand hold for climbing as it will not support your weight.
Do not install at eye level and in high-traffic areas to avoid potential collisions.
Do not install behind a door as the hooks make become damaged or damage a door.
Install the item out of childrens’ reach.
SPECIFICATIONS
Size:
4.2cm x 51cm x 6cm
(1.7in x 20in x 2.4in)
Weight:
215G (0.47 lbs)
Parts:
Two screws
Supports weight up to 22 lbs (10 kg).
MOP AND BROOM HOLDER
INSTALLATION GUIDE
ITEM# 498-4

STEP 1 STEP 2
STEP 3 STEP 4
Select an area of the wall to drill a hole
Take the two screws included in the package
Use a screwdriver and firmly tighten the
screws into their correct sockets.
Adjustable: the holders can easily be
adjusted for space by sliding them.
Installation Complete!
Alpine Industries Inc | 27 Selvage St., Irvington, NJ 07111 | Alpineindustries.com | 1 [phone]