Arctic W1B Operating and safety instructions

Dear Customer, Thank you for choosing the ARCTIC's W1B.In order to assist you better, we launched a support platform for Smartphones (support.arctic.ac).I hope you enjoy this monitor arm and we at ARCTIC look forward to further enriching your life with our products. If you would like to share how you use ARCTIC's products please do so at https://www.facebook.com/ARCTIC.enARCTIC is a fully carbon neutral company and your support helps us to compensate every kilogram of CO we produce. 2Thank YouSincerely, Magnus HuberARCTIC CEOWelcome GuideW1Bsupport.arctic.ac/z2ENDEFRES...support.arctic.ac/w1bwww.arctic.ac

Load upto 20kg VESA75 / 10013" - 32"Monitor
Compatibility Quick Start Guide
The information in this booklet will guide you through the mounting process and included all you need to know on our product. This user guide included the following:Packaging contentsInstallationWarning• • •
Thank you for selecting ARCTIC W1B-Monitor Wall Mount with Quick-Fix System.Accessories
• • SupportWarranty
Wood Screw x 2M4 (30 mm) x 4Spacer x 4M5 (12 mm) x 4
GIEJ
M4 (12 mm) x 4
AB
Plastic Peg x 2
FH
M5 (30 mm) x 4
K
Monitor Mount x 1Wall Mount x 1
C
Hey Key (4 mm) x 1Hey Key (3 mm) x 1
D

Installation
Position and screw the mount on the wallFor Wooden wall, use Wood Screw Ø6 x 50 mm x 2For Brick wall, use Plastic Peg x 2. Insert into the brick wall and fix mounting with Wood Screw Ø6 x 50 mm Ø3 mm (0.12”)20 mm (0.8”)Depth of screws in the wall: 20 mm (0.8”) Diameter: Ø3 mm (0.12”)1
Wood Screw
G
Plastic Peg
FB
Wall MountWood Screw
GØ8 mm (0.32”)50 mm (2.0”)Depth of screws in the wall: 50 mm (2”) Diameter: Ø8 mm (0.31”)

2Choose the right screws according to the size and depth of the holes at the back of the monitors. Spacers are used to fill the gap between the mounting bracket and the holes if any.DesignationMIS-D 75MIS-D 100MIS-ETable of VESA Mounting Interface StandardWidth × HeightScrewCompatible75 mm × 75 mmM4, M5Yes100 mm × 100 mmM4, M5Yes200 mm × 100 mmM4NoMIS-FM6, M8No200 mm × 200 mm400 mm × 400 mm600 mm × 200 mm600 mm × 400 mm800 mm × 400 mm280 mm × 150 mmExtended versionorShort version
Monitor Mount
VESA 100Distance 100 mm VESA 75Distance 75 mm
Spacer x 4M4 (12 mm) x 4 M4 (30 mm) x 4 M5 (12 mm) x 4 M5 (30 mm) x 4
HIJKEA

Slip the TV mount into the wall mount. Turn and tighten screws to lock the mounting.3Lock Screw
7
Adjust the flexibility of the hinges with the hex key and the lockable screw.Adjust the flexibility of the hinges with the hex key and the lockable screw.
Hex Key (4 mm)
C
Hex Key (3 mm)
D

Slightly loosen or tighten the screw by a 4 mm hex key when the monitor is too tight or looseSlightly loosen or tighten the screw by a 4 mm hex key when the monitor is too tight or loose
Adjust the Tightness of the Monitors
4
100 - 400 mm / 3.9 - 15.7”
180°Extended versionShort versionThe mounting is now set, you can make 360° rotation, 180° swivel or ±15°tilt to adjust to a perfect positioning.or±15°180°360°±15°180°360°
100 - 250 mm / 3.9 - 9.8”
Cable ManagementHex Key (4 mm)
C

MaterialNumber of Mountable MonitorsScreen SizeMaximum Monitor WeightVesa StandardRotationTiltAluminum Alloy ADC12113 " - 32 "20 kg / 44 lbs per mount75 / 100360 °+/- 15 °SpecificationsSwivel180 °Weight1.16 kgWarningThe wall structure must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced.Safety measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installation procedure to prevent personal injury.Prior to the installation of this product, the installation instructions should be read and completely understood. The installation instruction must be read to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future reference.A secure structure must support the weight or load of the display. When mounting to a wall that contains wooden studs, dead centre of the wooden stud must be confirmed prior to installation.Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the mounting surface.Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the display and could increase risk of fire.Recommended mounting surface: wooden studs and solid-flat concrete. If the mount is to be installed on any surface other than wooden studs, use suitable hardware (which is commercially available).• • • • • • • © 2016 ARCTIC (HK) Ltd. All rights reserved.No part of this manual including the products described in it, may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purpose, without the express written permission of ARCTIC (HK) Ltd. In no event shall ARCTIC, its directors or employees be liable for any indirect damages, incidental or consequential damages arising from any defect or error in this manual or product.
PKMNL00026C
SupportWarrantyThis ARCTIC Product includes a two-year limited warranty. Please visit http://warranty.arctic.ac for further details.For support and more information on the W1B - Monitor Wall Mount with Quick-Fix System, please visit http:\\w1b.arctic.ac