Argos Home FL-00216N Guide

FLOOR LAMP : FL-00216N
Installation and User Instructions-Please keep for future reference,This product is for indoor use only!
Important – Please read these instructions fully before using
Argos Limited, Avebury, 489-499 Avebury Boulevard, Saxon Gate West, Central Milton Keynes, MK9 2NW.
Contents: - Floor lamp
Safety Information
IMPORTANT – Please read these instructions fully before installation and keep for future reference
This fitting is double insulated and must not be
earthed. If in doubt, we recommend you consult a qualified
electrician.
This product is supplied complete with a 3-amp fuse plug.
Our products should not be modified. If any modification is
made, including tampering with the plug, it will invalidate the
warranty and may render the product unsafe.
IMPORTANT - Dispose of all packaging correctly and
responsibly and in accordance with all local laws and
regulations. Never leave packaging components within
reach of children as they can be a source of danger..
WARNING - This product is not intended for use by
persons (including children) with reduced physical, sensory
and mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the product by persons
responsible for their safety.
The symbol on the product indicates that
the lamp head must be at least 0.2m (20cm) from the
lit surface.
WARNING - Children should be supervised to ensure
that they do not play with the product.

Installation
Installation
IMPORTANT!-The external flexible cable or cord of this luminaire cannot be
replaced. If the cord is damaged, the luminaire shall be destroyed.
Installation
1. Carefully remove all parts from their packaging.
2. Screw the gooseneck onto the upper tube. Pull the external fiexible cable
to its utmost. Screw the upper tube onto the lower tube. Screw the lower.
Tube onto the base.(see the figure). Take care that excess cable does not
become trapped or twisted when fixing tubes logether.
3.Assembly is now complete, plug in to test. The lamp is turned on and off
using the foot switch.
4.If the product fails to light, unplug before investigating.
.
Maintenance
Maintenance
CAUTION! Always disconnect power supply when servicing or cleaning.
Cleaning
- Use a clean dry soft or slightly damp cloth.
- Do not use abrasive cloths or polishes as this may cause damage to the product.
Technical Data
Technical Data Table
Specification Value
Rating 220-240V~50Hz
Bulb LED 3W
NOTE:The external flexible cable or cord of this
luminaire cannot be replaced. If the cord is
damaged, the luminaire shall be destroyed.