Argos 8754592 User manual

CD/DVD Set
Dimensions
Width - 23cm
Depth - 18cm
Height - 94.5cm
Issue 1 - 23/4/10
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0800 1077812
Assembly Instructions - Please keep for future reference

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
• Check you have all the
components and tools listed on
page 2.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product during assembly,
this could cause damage.
• Parts of the assembly will be
easier with 2 people.
• Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• It is recommended that the unit
is secured to the wall.
• Check for hidden pipe work
and cables before drilling into
walls.
• We do not provide screws or
fixings due to the varying kinds
of wall structure.
• If using power tools, please
follow the safety instructions
supplied with the tools.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• The manufacturer shall have
no responsibility for failures
resulting from improper
installation.
• Dispose of all packaging
carefully and responsibly.

Please check you have all the panels listed below
2
Please check you have all the ttings listed below
50mm Screws x 8
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
Components - Fittings
Screw covers x 4
B
Components - Parts If you have damaged or missing components,
call the Customer Helpline: 0800 1077812
Tools required
To assemble
Suitable screwdriver
Back panel
(7.5 x 91.4cm)
2
Back panel
(7.5 x 91.4cm)
2
CD top
(16 x 16cm)
3
CD base
(23 x 18cm)
4
DVD top
(22.6 x 16.4cm)
6
DVD base
(23 x 18cm)
7
CD rack
(17 x 92.6cm)
1DVD rack
(23.4 x 92.6cm)
5

Assembly Instructions
Assembling the DVD
unit
Turn the base 7up
side down with the holes
on the underside. Line
up the 2 x back holes
with the back panel 2
(ensure that the small
hole is at the back and
bottom of panel) and
secure together with
screws A.
Turn the unit over.
a: Insert the rack 5into
the 2 x holes in base 7.
b: Locate the holes in
the underside of the top
panel 6onto the rack.
Line up the back holes
with back panel and
secure in place with 2 x
screws A.
c: Push screw covers B
onto the top screws.
Use the same procedure
to assemble the CD rack
using parts 1, 2, 3,
4 and the same ttings.
The CD/DVD units are
oor standing, but it is
recommended that the
unit is secured to the
wall.
Step 2
Step 1
Ensure that the wall
xing hole is at the
back and bottom of
panel
a: b:
c:
If you need help or have damaged or missing parts, call the Customer Helpline: 0800 1077812
or contact Troy Innovations Ltd, Victoria Works, Hill End Lane, Rossendale, Lancashire, BB4 7AG.
Bottom panel
Wall xing hole
at the top
Top panel
2
7
7
2
2
6
6
5
7
B
A
A
A