USX-MOUNT XAS301 User manual

XAS301
INSTRUCTION MANUAL
For 26-55" TV
If you have any questions along the way, just give us a call
1-800-460-0956 or mail to [e-mail].
We’re ready to help!

Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
2
Does your TV
(including accessories)
weigh MORE than
66 lbs. (30 kg)?
Do you have
all the tools
needed?
(NOT INCLUDE) Tape
Measure
CAUTION
Screw
driver
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
MAX:400mm/15.74"
(MIN:75mm/2.95")
MAX:400mm/15.74"
(MIN:75mm/2.95")
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please feel free to contact Customer
Service:
E-mail: [e-mail]
Phone call: 1-800-460-0956

TV INTERFACE
3
3D
TOP VIEW-RETRACTED SIDE VIEW - RETRACTED
MAX:400mm
[15.75in]
MAX:400mm
[15.75in]
430mm
[16.93in]
262mm
[10.31in]
726mm
[28.58in]
576mm
[22.67in]
3°
0°
MIN:75mm
[2.95in]
MIN:75mm
[2.95in]

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
4
Allen Key
x1
M6x8mm Bolt
x4
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
M8x35mm
Extended arms
x4 M4 M6
10mm
Washers
Spacers
TV Screws
x4
x4
x4
x4
x4
x4
x4 x4
x4

Parts and Hardware for STEP 2
5
Glass Base
x1
Upper Column Lower Column Plastic Sleeve
Iron Sheet TV-Plate M6x10mm
Bolt
M6x10mm
Bolt
Washer M8x30mm
Bolt
x1 x5 x2 x2 x4
x1 x1 x1 x1

6
1-1 Choose Configuration
①
②
③
④
① 75X75
② 100X100
③ 100X200
④ 200X100
⑤ 200X200
200X300 400X200
⑧
⑤
⑦
⑨
①
②
③
④
⑤
①
②
③
④
⑤
①
②
③
④
⑤
⑥ ⑥
⑥ ⑥
150X150
⑧
⑦
⑧
⑦
⑧
⑦
⑧
⑦200X400
⑨
⑩⑨⑩
⑨
⑩⑨⑩
300X200
⑩
⑥

1-2 Extended arms assembly options
7
400X400400X300
300X300

M8
M6
M4
TV back
Bracket Washer
Bracket Spacer
No, go to PAGE 9 for detailed combination.
Yes, go to PAGE 9 for detailed combination.
TV back
Short Screw
1-3 Select TV Screws 1-4 Need Spacer?
Washer
Long Screw
8

Screw(s) and washer(s)
Spacer(s), screw(s) and washer(s)
1-5 Attach the TV Plate
No!
9

Assemble the columns ( and ) with Bolt .Install it on the glass base ,
through iron sheet and plastic sleeve with screw .
10

11
As the TV height you desired screw bolt into right holes.

4-1 TV Tilting adjustment (+3°):
If you need tilt TV,you can loosen the bolts below and tilt up +3°
Then tighten the bolts.
+3°
12

4-2 Height Adjustment
If the TV height is not suitable, you can adjust the height by following the steps below.
13

4-3 Swivel Adjustment
14