Art Lighting Production ALWL10 User manual

Model:ALWL10
Archer Adjustable Sconce
Uses : E26 Medium Base 60 watt bulb or equivalent
Cord Length : 6’ with plug and switch.
Mounting Plate
X 1
X 1
Plastic Anchors
X4
Tapping Screw
X4
at 1- 855-855-0294 W Appliance Co.,1356 Broadway
New York, NY 10018
Fixture
Two shades included for this item,
Smaller shade is ideal for bedside
lighting, workspaces and desks.
Larger shade is perfect for larger
spaces such living rooms and family
rooms.
Before returning to your retailer, call our customer service line
USAGE ADVICE
Shade L X 1
Shade Top
Iron Ring L X 1
Shade Bottom
Iron Ring L X 1.
Shade S X 1
Shade Top
Iron Ring S X 1
Shade Bottom
Iron Ring S X 1.
Note：Hardware shown is not actual size.
Decorative Threaded
Knob X2
(attached to Mounting Plate)
Place on a flat and secure surface.
Only use the supplied AC power adapter to operate the lamp.Keep the light and power cord dry and clean at all times.
Clean only with a soft dry cloth. Do not use any solvents or cleaning
solutions when cleaning the lamp.
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents
list and diagram on above. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
Contact customer service for replacement parts.
Tools Required for Assembly( not included): Screwdriver, Phillips Screwdriver, Safety Glasses, Ladder.
DO NOT attempt to repair, disassemble, or modify the product under any circumstances.
DO NOT place the product near any heat source or in direct sunlight.
DO NOT use the lamp if the electrical power cord is damaged.
DO NOT touch any electrical appliances with wet hands.
DO NOT operate the lamp in damp or moist enviroments.
Never overload electrical circuits as it may cause electrical shock or hazardous fire.
Please read, understand, and comply with all the instructions provided in this manual before using this product. Failure to comply with the instructions
set forth in this manual and/or using the product in ways other than the ways mentioned in this manual may result in serious injury and/or damage to
the product.
WARNING
CAUTION
IMPORTANT:

1. Install the Mounting Plate to the wall with
included Plastic Anchors and Tapping Screws.
4. Remove lampholder ring from Fixture. Place
shade onto fixture by lining up center of wire
frame into the lampholder of the Fixture's metal
arm. Secure shade by tightening lampholder
ring from inside the shade. When lampholder
ring & shade are secure, screw in required
lightbulb (bulb not included)
5. Place the lampshade's diffuser as
illustrated by tilting diffuser from
one end and resting diffuser in
place on bottom of lampshade.
6. Extend or swivel mounting arm by loosening
the metal connectors on the Fxture.
Tighten connectors to secure arm to desired
position.
Now your ready to plug in your light and enjoy!
Metal
connector 27”-48”
Fully extended
Metal
connector
2. Line up the two screws on the Mounting
Plate with the holes of the Fxture and
secure using the attached Decorative
Threaded Knobs.
This ART LIGHT brand light fixture carries 1 Year Limited Warranty to the original purchaser. If during normal use, this ART LIGHT brand light fixture
fails due to a defect in material and workmanship within 1 year from the date of purchase, simply bring this light fixture directed to W Appliance Co.
At its discretion, ART LIGHT agrees to have the lighting fixture replaced with the same or similar ART LIGHT product free of charge, within the stated
warranty period, when returned by the original purchaser with original sales receipt. Notwithstanding the foregoing, this limited warranty does not
cover damage or failure caused by misuse or abuse including but not limited to improper installation, accident, unauthorized repair, maintenance, or
modifications of the merchandise.
This warranty: (1) excludes expendable parts including but not limited to light bulbs; (2) carries a 1-year finish warranty protecting finish
against tarnishing, flaking, and discoloration; (3) shall be void if this lighting fixture is not installed in the U.S.A.; (4) does not cover products installed
within three miles of saltwater coastline or any area prone to salt spray; and (5) does not cover any losses labor, injuries to persons/property or costs.
This warranty does not give you specific legal rights and you may have other rights, which vary from state to state. Be careful, it is recommended that
installation be done by a qualified professional; the purchaser has sole responsibility for proper installation in compliance with all state and local code
requirements. Seller's employees are not qualified to advise you on the use of the Merchandise. Any oral representation(s) made will not be binding
on seller or its employees. The rights under this limited warranty are to the original purchaser of the Merchandise and may not be transferred to any
subsequent owner. This limited warranty is in lieu of all warranties, expressed or implied including warranties or merchantability and fitness for a
particular purpose. Seller shall not be liable for any special, incidental, or consequential damages. The sole exclusive remedy against the seller will be
for replacement of any defects as proceeded herein, as long as the seller is willing or able to replace this product or is willing to refund the purchase
price as provided above.
1-YEAR LIMITED WARRANTY:
1 2 3
4 65
ROTATION
ASSEMBLY INSTRUCTIONS
3. Using the appropriate sized Iron Rings &
Shade; line up the Bottom & Top Iron Ring
with the adhesive tape on the Lampshade.
Securely fasten the Shade's tape around
the edge of the Rings to bond together.