
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
1. Raise the 12" rod (N) and 6" rod (M) thread to the fixture body (O), then attach the swivel (L) to the rod (M).
2. Unscrew the mounting plate (A) from canopy (K), attach the swivel (L) to the canopy (K), secure
with metal plate (J), spring washer (I) and hex nut (H) by using the spanner (R).
3. Puching the hole and install the anchor (E) to the ceiling.
4. Attach the mounting plate (A) to the junction box (not included) with the two outlet box screws(C),
secure with tapping screw (F), then connect wires.,
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
* Parallel Cord (round & smooth)
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw(B) on mounting plate, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire nut.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting plate. Tighten ground screw.
5. Raise the canopy (K) thread to the mounting screws, secure with canopy nut (Q).
6. Install the light bulb (P) to the socket.
specified on this fixture. Make sure that electrical current is turned off before changing bulbs.
PLEASE USE TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT,
THERE IS LED 4-WATT BULB IN THE BOX
ENJOY YOUR LAMP