ARTISUL M0610 Pro User manual

User Manual
For Macintosh OS
Artisul LCD Pen Tablet | Model: M0610 Pro

1
Precautions
1. Please read this manual carefully before using, and keep it well for future reference.
2. Before cleaning the tablet please unplug the power cord and wipe with a soft damp cloth, do
not use any kind of detergents.
3. Don’t expose this product to water or other liquids. Take care to never spill liquids onto the
tablet and pen. Exposing this product to water or other liquids may cause product malfunction or
electrical shock.
4. Do not place the tablet on where is unstable or a height for children reaching easily in order to
avoid danger. Prevent children from swallowing the pen nib or side switch. The pen nib, side
switch, or other movable parts may accidentally be pulled out if children are biting on them.
5. Power off your tablet in locations where/when electronic devices is not allowed. Because the
tablet may cause other electronic devices to malfunction in some locations where/when the use
of electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet.
6. Do not disassemble the tablet and pen. Do not disassemble or otherwise modify the tablet or
pen. Such action may cause heat generation, ignition, electronic shock, or other damage,
including human injury. Disassembling the product will void your warranty.
7. While getting the components replaced, you are supposed to guarantee that the repairman is
using the substitute components specified by the manufacturer. Unauthorized component
replacement might cause fire, electric shocks or other dangers.
8. Do not insert foreign material into the USB port or any other opening of this product. If a metal
object or foreign material is inserted into a port or other opening of this product it may cause the
product to malfunction or burn out, or cause electronic shock.

2
Contents
1. Product Overview.......................................................................................................................................................................3
1.1 Tablet Introduction.............................................................................................................................................3
1.2 Product and Accessories...................................................................................................................................3
1.3 Setting up the Tablet ......................................................................................................................................... 4
1.4 Driver Installation................................................................................................................................................ 5
1.5 Pen Nib Replacement........................................................................................................................................ 6
2. Product Basic Operation.......................................................................................................................................................... 6
2.1 Using the Pen ........................................................................................................................................................6
2.2 Using the Tablet ...................................................................................................................................................8
3. Function Setting....................................................................................................................................................................... 10
4. Function Setting....................................................................................................................................................................... 11
4.1 Device Connection Notification...................................................................................................................11
4.2 Press Keys Setting..............................................................................................................................................11
4.3 Pen Setting.......................................................................................................................................................... 14
4.4 Import and Export Data..................................................................................................................................17
5.Specifications..............................................................................................................................................................................18
6.Trouble Shooting...................................................................................................................................................................... 19
6.1Possible Breakdowns Related to TABLET...................................................................................................19
6.2Possible Breakdowns Related to SYSTEM ................................................................................................. 19
7.After-service Contact............................................................................................................................................................... 19

3
1. Product Overview
1.1 Tablet Introduction
Thanks for choosing Artisul® M0610 Pro creative pen tablet. This is a new
generation of professional battery-free drawing tablet, which can greatly improve
your work efficiency of painting and creation, and full of fun. You can freely do
painting and writing, depicting different lines and colors, just as the pen writes on
the paper, which brings you a real shock experience.
To give you a better understanding and using of your tablet, please read this user
manual carefully.
1.2 Product and Accessories
1.2.1 Product Overview

4
1.2.2 Other Accessories
Stylus Pen Pen Bag Pen Nibs Pen Nib Clip
-
USB Cable Glove Quick Start Guide
1.3 Setting up the Tablet
1.3.1 Connecting to the Computer
Take out the USB cable from the package, then connect the tablet to yourcomputer.

5
1.3.2 Connecting to an Android Mobile Phone
1. Please use Android phone/tablet in portrait mode.
2. Please make sure your phone/tablet OS is as following: Android OS 6.0 or later.
3. For some models, you need to go phone or tablet “Settings”, and then enable
“OTG” function.
4. Choose the right OTG Adapter from package, which depends on USB port type of
your phone/tablet. Then connect the pen tablet to your phone following the
illustrations below.
Notes:
1. The pen tablet can works without installing any driver into your phone/tablet.
2. Once connected, the tablet will automatically enter phone mode, in which the
pen can only work in the left gray area.
3. If it fails to recognize the tablet as the phone mode, please press the button ⑤,⑧
at the same time for 1 seconds to enter phone mode.
4. Please note that the press keys of pen tablet and digital pen are not supported in
phone mode.
1.4 Driver Installation
1.4.1 OS Support
Windows 7 or later,Mac OS 10.8.5 or later,Android 6.0 or later
1.4.2 Install via Download
Please download the driver from our website: www.artisul.com/downloads
Notice：
1. Before installing, you need to uninstall other driver of similar products, including
the old driver of this product.
2. Before installing, please close all graphics software and anti-virus software to

6
avoid unnecessary mistake.
3. Before installing, you need to connect your Artisul product to the computer.
1.5 Pen Nib Replacement
The nib will be wear out after using for long time, then you need to replace a new
nib.
2. Product Basic Operation
2.1 Using the Pen
2.1.1 Hold the pen
Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can
toggle the side switch easily with your thumb or forefinger. Be careful not to
accidentally press the switch while drawing or positioning with the pen.
Notice: When not in use, place the pen in the pen case or on the desk. Do not place
the pen on the surface of screen, which may interfere with the use of other screen
cursor positioning equipment, it may also cause your computer unable to enter the
sleep mode.
2.1.2 Position the cursor
Move the pen slightly above the active area without touching the screen surface,
the cursor will move to the new position accordingly.
Press the pen tip on the screen to make a selection. Tap the screen once with the
pen tip, or touch it to the screen with enough pressure to register a click.

7
2.1.3 Click
Use the pen tip to tap on the screen once to produce a click. Tap to highlight or
select an item on the screen and double-click to open it.
2.1.4 Move
Select the object, then slide the pen tip across the screen to move it.

8
2.1.5 Use the side buttons
The side buttons of the pen can be set to two different customizable functions.
You can use the buttons whenever the pen tip is within 10mm of the tablet active
area.
You do not have to touch the pen tip to the tablet in order to use the switch.
2.2 Using the Tablet
2.2.1 Press Keys & Dial
There are 8 press keys and one dial on the tablet. You can modify the functions
according to your own habits to improve your work efficiency. See “Press Keys
Setting”.
To use the dial in the “Use Dial” mode:
1. Press the centre of the dial to select the function to be achieved.
2. Rotate the dial to use the function.
2.2.2 LED Indicators of Press Keys & Dial
The LED indicators of press keys and the dial support monochromatic,
polychromatic, and off modes. To customize the LED indicators:
1. When you press key 8, the indicators will switch between the three modes.

9
2. When the indicators are in monochromatic or polychromatic mode, press and
hold key 8, and press key 6 or 7 to adjust the indicator brightness.
3. When the indicators are in monochromatic mode, press and hold key 8, and
rotate the dial to select the desired color.
Notes:
1. The indicators in monochromatic mode will switch to polychromatic mode after
the tablet is not in use for one minute.
2.
The indicators will switch to off mode after the tablet is not in use for six minutes.

10
3. Function Setting
1.Put the downloaded driver into “Applications”.
2.Click “Applications” and then open the driver.
3.Use the digital pen to tap on the screen of the pen display and the
“ Accessibility Access ” pop-up window appears. click “ Open System
Preferences”. Go to “Security & Privacy” and click “Privacy”. Click the lock
icon to unlock the settings. Then enter your username and password. Tick the
checkbox on the left of the driver to enable it and you can use the device.

11
4. Function Setting
4.1 Device Connection Notification
1.No Device Detected: The device can not be identified by the computer.
2.Device Connected: The device is identified by the computer.
4.2 Press Keys Setting
4.2.1 Hotkeys Setting
Default functions: Place the cursor over one of the buttons on the driver or click a
button to check its default value.
Custom functions: Click a button and then a pop-up dialog box appears. Choose
what you want and set its function.
Enable/Disable press keys: Check/uncheck “Enable Express Keys”.

12

13
4.2.2 Scroll Dial Setting
1. Select “Dial”.
2. Click one of the six values and select the function to be achieved on the menu
displayed.

14
4.3 Pen Setting
4.3.1 Pen Button
Click the buttons to set custom functions. You can enter a name for the keystroke
and choose the function you want.

15
4.3.2 Pressure Sensitivity
Adjust the pressure sensitivity level by dragging the slider in the Pressure Sensitivity box
shown below:
Move the slider up to get a high level of pressure sensitivity, and move it down to get a
low level of pressure sensitivity.

16
4.3.3 Pressure Sensitivity Testing
Draw lines in the Pressure Test box with the pen, and the bar on the right will
simultaneously show the pressure changes on the pen nib. Test several times until you
find the appropriate pressure sensitivity level.

17
4.4 Import and Export Data
The functions you set in the driver will be saved and you can import or export
these data in Backup.

18
5.Specifications
Creative Tablet
Model
M0610 Pro
Touch Technology
Battery-free Electromagnetic Resonance
Working Area
258.47 x 161.54 mm (with your computer)
161.54 x 100.5 mm (with your mobile phone)
Dimension
350 x 208 x 9 mm
Touch Resolution
5080 LPI
Report Rate
300 PPS
Pen Sensing Height
10 mm
Interface
Type-C
Press Keys
7 Customized Press Keys
Tilt Range
±60°
OS Support
Windows 7 or later
Mac OS 10.8.5 or later
Android 6.0 or later
Digital Pen
Model
P58B
Dimension
149 x Φ14mm
Weight
14 g
Pressure
8192 Levels

19
6.Trouble Shooting
6.1Possible Breakdowns Related to TABLET
Abnormal Phenomena
Possible Solutions
There is no pressure in the
graphics software but the
cursor moves
You may have installed other tablet drivers or opened the
drawing software when installing the driver. Please uninstall all
drivers and close the drawing software, then reinstall the
driver. It’s better to restart your computer after finishing the
installation.
The pen does not work
1. Make sure you are using the pen that originally came with
your tablet.
2. Make sure you installed the driver correctly.
Press Keys does not work
1. Make sure the Press Keys function were enabled in the driver.
2. Make sure you have correctly defined the Press Keys.
The computer can’t enter
sleep mode
When you are not using the tablet, please do not put the pen
on the tablet surface, which will keep the computer awake.
The side button of the pen
doesn’t work
When pressing the side button, please make sure that the nib
didn’t touch the tablet surface and the distance between the
nib and surface is within 10mm.
6.2Possible Breakdowns Related to SYSTEM
Abnormal Phenomena
Possible Solutions
The computer can’t recognize
the tablet
Make sure the USB port is functional, if not, please change to
another USB port.
7.After-service Contact
If you have any questions, please feel free to contact us at:
Website: www.artisul.com
Email: [e-mail]