AS MOTOR Ride-on Allmaher AS 940 Sherpa 4WD XL User manual

Operator's Manual
All Terrain Mower
AS940Sherpa4WDXL
From serial number: 028016080001
Issued: 03.07.2019, V1.5
en-Translation of the Original Operator's Manual

Notes on the operating manual
2
Notes on the operating manual
Dear customer,
Congratulations on your purchase. You have acquired a reli-
able quality product by “AS-Motor Germany”.
This product has been manufactured according to modern
manufacturing methods and comprehensive quality assur-
ance measures. Only when you are satisfied with your
device, we have attained our goal.
These operating instructions are an essential part of the
device. They contain important information to help you avoid
hazards and to increase the reliability and the life span of the
device.
Read the operator’s manual before using the
device. Share this operator’s manual and the oper-
ator’s manual of the engine manufacturer with
other users of the device.
In these operating instructions, for AS 940 Sherpa 4WD XL
the term “device” is being used.
Contact
If you have questions about your device, please contact your
dealer or directly our service department.
German Headquarters:
AS-Motor Germany GmbH & Co. KG
Ellwanger Straße 15
74424 Bühlertann
Germany
+4979739123-0
US Sales Representation:
Toll Free: (800)-518-5006
E-mail: [email protected]
For international AS partners, please see:
www.as‑america.com.
Device data
Please fill in all data referring to your device. When ordering
spare parts, provide your dealer with the serial and engine
numbers.
Serial number (see manufacturer’s certificate or type plate):
Engine number:
Date of purchase:
Address of dealer:
Intended use
The device is intended for cutting and mulching grass, under-
growth or weeds in agriculture, forestry, and landscape con-
servation. Woody growth must not be older than maximally
one year.
The device is intended for use by professional and instructed
users. These users must be able, due to their knowledge and
experience, to use the device and detect and avoid possible
dangers of their own.
Always follow OSHA approved operation.
Only use attachments and cutting tools authorised by “AS-
Motor Germany”.
Any other use exceeding this purpose is inadmissible.
Observe the instructions in chapter Maintenance. Otherwise,
operational safety is endangered.
The user of the device is responsible for accidents or dam-
age that can happen to other persons or their property!
In particular, the device must not be used:
– as a toy.
– to transport people.
– to cut hard objects, stones, rubble, or pieces of wood.
– to trim bushes, hedges, and shrubbery.
– to cut plants in balcony boxes or containers or on roofs.
– as shredder for shredding tree and hedge cuttings.
– as drive unit for work tools and any type of tool sets that
are not authorised by “AS-Motor Germany”.
The device is not licensed for driving on public roads.
It is not allowed to use the device in California.
The US Environmental Protection Agency (EPA) Regulation
of emission systems, maintenance, and warranty require-
ments are fulfilled. Observe the information in the operator’s
manual of the engine manufacturer.
The spark ignition system complies with Canadian ICES-002.

Contents
Notes on the operating manual.................................. 2
Contact ......................................................................... 2
Device data................................................................... 2
Intended use................................................................. 2
Explanation of the symbols........................................ 4
Warnings...................................................................... 4
Symbols in the instructions........................................... 4
Signs on the device...................................................... 4
Position of the safety signs on the device................ 6
Description of the safety signs on the device .......... 7
Safety instructions ...................................................... 11
Prior to starting............................................................. 11
User restrictions and hours of operation....................... 11
Safe handling of fuel..................................................... 11
Check the device prior to use....................................... 12
Danger area.................................................................. 12
Fire hazard................................................................... 12
Spark arrestor............................................................... 12
Danger of poisoning due to exhaust gases.................. 12
Use caution during operation........................................ 13
Prior to mowing............................................................. 13
Use caution when mowing............................................ 13
Caution when mowing slopes....................................... 14
When work is completed.............................................. 15
Use caution during maintenance and repair................. 15
Device description....................................................... 16
Control elements ......................................................... 17
Front area..................................................................... 17
Control lever at seat..................................................... 17
Drive/idle mode............................................................. 18
Bar................................................................................ 19
Information on mowing............................................... 19
Prior to starting............................................................ 20
Checking the oil level.................................................... 20
Fuel............................................................................... 20
Tanking up.................................................................... 20
Adjusting the seating position....................................... 20
Adjusting the seat suspension...................................... 20
Putting up the bar......................................................... 20
Transport rack.............................................................. 20
Starting......................................................................... 21
Safety switches............................................................. 21
Starting the engine....................................................... 21
Engaging the blade....................................................... 21
Driving .......................................................................... 22
Brakes.......................................................................... 22
Driving.......................................................................... 22
Differential lock............................................................. 22
Transport...................................................................... 23
Loading......................................................................... 23
Unloading the device.................................................... 23
Moving the device without drive................................ 24
Disconnecting the drive................................................ 24
Pushing......................................................................... 24
Towing.......................................................................... 24
Switching off and parking........................................... 25
Maintenance and cleaning.......................................... 26
Before and after each use by the user......................... 26
Once a year or every 50 h by authorized service
centre............................................................................ 27
Prior to maintenance and cleaning............................... 28
Maintenance and cleaning position.............................. 28
Cleaning the device...................................................... 29
General inspection........................................................ 29
Checking the safety functions....................................... 29
Checking the parking brake.......................................... 29
Checking the blade....................................................... 30
Checking the blade brake clutch.................................. 31
Maintaining the engine................................................. 31
Opening the engine cover............................................ 31
Checking the engine oil level........................................ 31
Checking the spark plug............................................... 32
Maintaining the air filter................................................ 32
Checking and charging the battery............................... 32
Hydrostat transmission................................................. 33
Assembly...................................................................... 34
Scope of delivery.......................................................... 34
Unpacking..................................................................... 34
Mounting....................................................................... 34
Storage ......................................................................... 34
Storing the device......................................................... 34
Longer storage............................................................. 34
Restarting..................................................................... 34
Spare parts................................................................... 35
Reordering labels......................................................... 35
Wear parts.................................................................... 35
Tyres............................................................................. 35
Disposal........................................................................ 35
Warranty....................................................................... 35
Troubleshooting .......................................................... 36
Technical data AS 940 Sherpa 4WD........................... 38
3
Contents

Explanation of the symbols
4
dummy Inhaltsverzeichnis
Explanation of the symbols
Warnings
In these operating instructions, warnings are marked with sig-
nal word and colours. The signal words and colours out used
to point to following hazards and potential consequences.
Danger
Imminent danger
Indicates an imminently hazardous situation with a high
level of risk that, if not avoided, will result in death or
severe injury.
Warning
Hazardous situation
Indicates a possibly hazardous situation with a medium
level of risk that, if not avoided, could result in death or
(severe) injury.
Caution
Hazardous situation
Indicates a possibly hazardous situation with a low level
of risk that, if not avoided, could result in minor or moder-
ate injury.
Notice
Danger of property damage
Indicates a possible risk of damage of the device and its
surroundings.
Symbols in the instructions
The device is only as safe as its user. Carelessness, negli-
gence or an operating error could result in severe injuries or
death.
In these operating instructions, the following symbols are
used to denote special dangers.
Warning.
These symbols indicate special dangers.
Prohibition sign.
These symbols denote inadmissible procedures.
Directive sign.
These symbols denote required protective meas-
ures.
Signs on the device
In addition to the safety signs and the symbols for the control
elements, the following signs are attached to the device:
Noise is causing health problems. Use personal
ear protection to avoid hearing damage.
Wear safety glasses.
Do not clean the device with a water jet or high-
pressure cleaner.
Clean ventilation grid!
The cooling air of the engine is sucked in through the ventila-
tion grid of the engine cover. Always keep the entire surface
free and open!
EPA compliant
MOD
MSOPTANK003
Fig.1:
The US Environmental Protection Agency (EPA) Regulation
of emission systems, maintenance, and warranty require-
ments are fulfilled. Observe the information in the operator’s
manual of the engine manufacturer.

Explanation of the symbols
5
Type plate
The type plate on the device provides you with informa-
tion on the device type and the technical data.
1
2
3
4
5
6
7
XXX XXXXXXX XXXXXX
Engine Power XXX GHP/XXXX Gross kW at XXXXrpm
Operational Weight XXXlb/XXXkg
XXXX
SNR: XXXXXXXXXXXX
AS-MOTOR GERMAN Y GmbH & Co KG
Ellwanger Straße 15
D-74424 Bühlertann
1003s
AS XXX
1 Name and address of the manufacturer
2 Device designation
3 Type designation
4 Engine power
5 Operating weight
6 Year of manufacture
7 Serial number

Position of the safety signs on the device
6
Position of the safety signs on the device
The following signs are attached to the device to provide a reminder that during use of the device, you will have to be careful
and attentive. If one of the signs becomes unreadable, replace it. For reorders of the signs, use the indicated order number.
A
C
K
M
I
L
H
J
G
B
D
F
E
BG
J
Pos. Order number
AG00014774
G00014773
BG00014806
CG00014776
DG00014801
EG00014777
FG00014775
GG00014778
HG00014779
IG00014799
JG00014798
KG00014780
LG00014804
MG00014796

Description of the safety signs on the device
7
Description of the safety signs on
the device
A G00014774 + G00014773
Fig.2:
Fig.3:
Read and understand the operating instructions.
Operate the machine only when the safety devices, screens
and safety installations are in place and properly functioning.
Do not operate the machine when children and/or other
people are in the proximity.
Operate the machine only when you have been adequately
trained.
B G00014806
Fig.4:
Risk of injury. Keep your hands and feet away.
C G00014776
Proceed with extreme caution when working with
the device.
Read the operating instructions before using the
device.
Risk of injury!
Object can be ejected.
Make sure that nobody is in the danger area of
the device.

Description of the safety signs on the device
8
D G00014801
The quickly rotating blades can cause life-threat-
ening injuries or major property damage!
Make sure to especially keep hands and feet
away from the blades when the device is in oper-
ation.
Risk of injury due to unintended startup of the en-
gine.
Prior to repair and maintenance work, pull off the
ignition key.
E G00014777
Risk of injury during driving and mowing in re-
verse.
Be extremely cautious when moving and mowing
in reverse.
Make sure that nobody is in the danger area of
the device.
Risk of injury due to being run over.
Do not transport any person on the device.
F G00014775
Risk of tipping.
Always mow uphill and downhill, do not drive across the
slope.
G G00014778
Risk of injury!
Object can be ejected.
Make sure that nobody is in the danger area of
the device.
The quickly rotating blades can cause life-threat-
ening injuries or major property damage!
Especially make sure to keep hands and feet
away from the blades when the device is in oper-
ation.

Description of the safety signs on the device
9
H G00014779
Burn hazard from hot surfaces.
Do not touch the engine or the silencer. They get
very hot during operation.
Risk of injury due to rotating parts.
Keep your hands away from rotating parts.
I G00014799
Risk of injury due to rotating parts.
Keep your hands away from rotating parts.
J G00014798
Burn hazard from hot surfaces.
Do not touch the engine or the silencer. They get very hot
during operation.
K G00014780
Fig.5:
Fire and explosion hazard.
Prior to refuelling, remove the ignition key. Keep fuel away
from ignition sources and do not smoke during handling.
L G00014804
Fig.6:
Warning sign of the engine manufacturer on the engine. Ob-
serve the information in the operating instructions of the en-
gine manufacturer.
M G00014796
Fig.7:
Batteries can be dangerous. Keep children away.
Read the information in the operating in-
structions on the battery.
Explosive gases can cause injuries or make
you blind.
Wear safety glasses.

Description of the safety signs on the device
10
Keep open flames and ignition sources
away and do not smoke.
Sulphuric acid can cause blindness or
severe burns.
If battery acid comes into contact with eyes,
immediately rinse the eyes. Get medical at-
tention promptly.
California Proposition 65
-Warning-
This product may contain a chemical
known to the State of California to cause
cancer, or birth defects or other reproduct-
ive harm.
After contact with the product, wash your
hands.

Safety instructions
11
Safety instructions
Prior to starting
For your safety, read these operating instructions carefully.
Familiarize yourself with the control elements and the proper
use of the device. Share these operating instructions with all
other users of the device.
Have skilled personnel who were trained by AS-Motor show
you the safe handling of the device before you work with it for
the first time.
Your dealer can supply you with further training material.
Read the operating instructions of the engine and share them
with all other users of the device.
Get familiar with the device in a wide, open and flat terrain
first.
Always follow OSHA approved operation.
User restrictions and hours of operation
Never allow children or persons who are not familiar with the
operating instructions to use the device. Persons under 18
years of age may operate the device only under proper su-
pervision. Local regulations determine the minimum age of
the operator und the operating times.
Unsuitable for operation of the device are persons who
– are under the influence of alcohol, drugs or reaction retard-
ing medicines.
– have physical and mental/emotional impairments.
– are tired or sick.
Persons with pace makers must not touch live
parts of the ignition system.
Safe handling of fuel
Fuel is toxic and highly flammable. There is a burn and explo-
sion hazard!
Keep fuel away from ignition sources and do not smoke dur-
ing handling.
Do not inhale fuel vapours, they are dangerous to your
health.
Use glove and avoid skin contact with the fuel.
Always refuel outdoors when the engine is cold and standing
still. When doing so, always use a filler spout or a funnel.
Do not spill any fuel or do not let fuel enter canalisation or
drain away.
When fuel has overflown, do not start the device until the fuel
vapours have evaporated (wipe dry). Move the device away
from the spilled fuel.
Always close the tank cap tightly and do not open it while the
engine is running or the device is still hot.
When longer operating pauses are scheduled, the fuel should
be run empty as much as possible.
Store the fuel away from children and keep it in a suitable
container in a dark, cool and dry place.
Never store the device when there is fuel in the tank inside a
building where fuel vapours might come into contact with
open fire or sparks.
Immediately replace the fuel tank or tank cap if they are dam-
aged (authorised service centre).
First aid
When swallowing fuel or inhaling fuel vapours, do not force
vomiting and immediately consult a doctor.
In case of skin contact, immediately wash with water and
soap. Change your soiled clothing as soon as you can.
Measures in case of a fire
In case of a fire, use foam, dry powder extinguisher, or car-
bon dioxide (CO2). Never spray with water!

Safety instructions
12
Check the device prior to use
Prior to each use, check the blade, protection skirt, ejection
rubber, drive and fastening parts, cables and cable connec-
tions for proper working condition and firm seating by visual
inspection.
Never use the device if covers, impact protection, ejection
rubber or protection skirt are defective or not mounted.
Do not remove, change or override any safety devices or
control elements.
Observe the maintenance instructions and replace damaged
or worn parts immediately.
Have an authorised service centre check the device if the
blade does not stop within 5 seconds after being switched off.
Check the parking brake for proper function (see mainten-
ance).
Danger area
Fig.8:
Within the danger area of the device, there is a risk of death.
The rotating blade can cause injuries and objects can be
thrown out. The area in front of and to the right of the device
is especially dangerous.
On slopes, the device can tip over and slide towards persons
or run them over.
Make sure
– that nobody else is in the area that will be mowed.
– that people are never positioned in the direction of travel in
front of the device.
– that nobody is positioned on the slope below the device.
– that you have a complete overview of the danger area at all
times.
– that you keep your hands and feet away from the rotating
parts.
Fire hazard
Parts of the device can become extremely hot during opera-
tion and this may cause fire.
– Carry a sufficient amount of suitable extinguishing media.
– Observe the device and the moved area even after opera-
tion to make sure that no fire breaks out.
When fuel leaked or was spilled, there is an increased fire
hazard.
To prevent a fire hazard, always keep the following compon-
ents free of dirt, grass, hay, leaking oil, leaking fuel, grease,
etc.:
– engine, ventilation grid
– silencer (manifold, protection, spaces)
– battery, cable connections, electric drive units
– area around the fuel tank
– belt drives
Observe the information in the operator’s manual of the en-
gine manufacturer.
Spark arrestor
The engine in this machine is not equipped with a spark ar-
restor muffler.
It is in violation of California Public Resources Code Sec-
tion4442 to use or operate this engine on or near any forest
covered, brush covered or grass covered land unless the ex-
haust system is equipped with a spark arrestor meeting any
applicable local or state laws.
Other states or federal areas may have similar laws. Check
with your state or local authorities for regulations pertaining to
these requirements.
Danger of poisoning due to exhaust gases
Engine exhaust fumes contain carbon monoxide that can
lead to serious health problems or death. Do not operate the
engine in a closed room, even when all doors and windows
are open and the room seems to be sufficiently ventilated.
Operate the engine only after you have moved the device to
the outdoors.
Observe the information in the operator’s manual of the en-
gine manufacturer.

Safety instructions
13
Use caution during operation
Danger of injury during motor start
The motor must not be started,
– When fuel was spilled.
– Before spilled fuel was removed.
– In closed or badly ventilated rooms (danger of poisoning!).
– When other persons are in close proximity.
Risk of injury when the blade is running
Switch off the blade and wait until the blade stops
– when you drive on surfaces other than the mowing area.
– when you do not mow.
– when you cannot overlook completely the area to be
mowed.
– when the device must be manoeuvred out of a dangerous
position.
– when the trafficability of the area to be mowed is too un-
safe.
Risk of injury when the motor is running
Switch off the engine, wait for the blade and the engine to
stop and remove the ignition key
– before you transport the device.
– before you step away from the device, even for just a short
time.
– before you clean or check the device or before you carry
out work on the device.
– Before you remove the blockages at the mower.
– Before you refuel.
Risk of injury due to uncontrolled rolling
Actuate the parking brake after each stop and before shutting
off the engine. By doing so, you can prevent the device from
rolling away in an uncontrolled way.
Risk of burns
Do not touch the muffler, the engine, and the gearbox. These
parts become very hot during operation and you can get
burned. If a jumpy movement occurs, the risk of additional in-
juries can result.
Prior to mowing
Personal protective measures
During mowing, always wear safety shoes with
good grip and long trousers. Do not mow with open
sandals or while shoeless.
Wear safety gloves to protect yourself against injur-
ies and vibrations.
Noise is causing health problems. Use personal
ear protection to avoid hearing damage.
Wear safety glasses.
Ask your specialised dealer about suitable protective equip-
ment.
Preparing the mowing area
Prior to mowing, carefully check the perimeter of the lawn.
Remove rocks, pieces of wood, bones, wires, and other ob-
jects that could be picked up and thrown out by the device.
Use caution when mowing
Risk of injury
Keep your hands and feet away from the rotating parts.
Make sure that help can be provided in case of an emer-
gency.
Only mow during daylight or with adequate artificial lighting.
Never mow in the event of uncertain weather conditions and
risk of lightning.
Be especially carefully when mowing on soft ground, nearby
landfills, ditches and dikes.
Do not transport any person on the device.
Be extremely cautious when moving and mowing in reverse.
Pay attention to traffic when working close to roads.
Vibrations
When the device is used over a longer period of time, vibra-
tions can cause disturbances in the blood supply of the
hands. A generally accepted usage time cannot be determ-
ined.
– Use gloves.
– Take breaks on time.
Have an authorised service centre check the device
– when the blade has hit an object.
– if the device starts to vibrate unusually severely.

Safety instructions
14
Caution when mowing slopes
If the device, while in use, stops in steep terrain or the engine
cuts out, the device can roll away. Immediately actuate the
parking brake to prevent the device from rolling away.
Sliding and tipping risk
Fig.9:
Risk of injury during mowing on slopes due to tipping over or
sliding.
– Do not mow excessively steep slopes.
– Please observe the following information on the danger
area.
– Never unlock the drive at the slope because the device can
roll away.
– Always mow uphill and downhill, avoid driving across the
slop.
– Never drive on a slope that you cannot drive up backwards
without sliding.
– Be extremely cautious when changing the direction.
– Do not turn on a slope.
– Prior to entering the slope, always actuate the differential
lock. Move on slopes only when the differential lock is ac-
tivated.
– Always keep the speed low when moving on slopes.
– Do not start abruptly and do not brake abruptly.
– Hold the steering wheel tightly so that the device does not
swerve.
– Drive with the bar flipped up. If the device tips over, the bar
can prevent the device from overturning.
When the uphill wheels encounter obstacles such as roots,
branches, rocks, mounds etc., the device can tilt or slip.
– Only mow when you are familiar with the terrain and the
terrain is clear of obstacles.
– Pay attention to bumps, holes, and other visible hazards.
– Do not mow close to danger zones (e.g. walls, steep de-
clines, etc.).
Increased risk of tipping with additional load
When the transport rack is loaded, there is an increased risk
of tipping. Please observe the information on the transport
rack.
Keep in mind that all attachments or additional loads increase
the risk of tilting.
Danger due to uncontrolled slipping
Only park the device on flat surfaces.
Proceed with extreme caution in case the ground is wet or
loose. The danger of slipping is very high on cut growth, no
matter if it is wet or dry.
If the mower starts to slide you cannot regain control by actu-
ating the brake.
Uncontrolled sliding can occur because of:
– slope angles that are too steep.
– slippery ground.
– poor tire grip.
– speeding.
– abrupt braking.
– an inappropriate task for the device.
If the device tilts or slips
– Never try to stop a tilting or sliding device. Severe injuries
can result.
– Remove leaking fluids (oil, fuel, battery acid) from the
device and the floor. Deposit of contaminated soil environ-
ment friendly according to the local regulation.
– Undetectable damage may have occurred to the device. In
case of malfunctions, there is a risk of injury. Have an au-
thorised service centre check the device.

Safety instructions
15
When work is completed
After mowing, always close the fuel valve.
Prior to leaving the device, wait until the motor comes to a
standstill and pull off the ignition key.
After switching it off, let the device cool down for at least 20
minutes before you store it in a dry, locked, sufficiently ventil-
ated room.
Never store the device when there is fuel in the tank inside a
building where fuel vapours might come into contact with
open fire or sparks.
Use caution during maintenance and
repair
Only carry out work as described in these operating instruc-
tions. Have an authorised service centre perform all other
work.
Only use the blades and spare parts authorised by “AS-Motor
Germany”. Unauthorised blades and spare parts can cause
severe injuries.
Prior to all maintenance work, wait until the engine comes to
a standstill and pull off the ignition key.
We would like to explicitly point out that we cannot be made
responsible for damages caused by our devices if
– worn or damages parts were not repair on time.
– if they were caused by improper repair.
– if, in case of a part replacement, other parts than our ori-
ginal components or components approved by us have
been used.
– repair has not been carried out by an authorised service
centre.
The same applies to spare parts.

Device description
16
Device description
1
234 5 6
7
8
6
9
10
11
13
14
5
12
15
1Tank cap
2Fuse electric circuit
3Type plate
4Power socket
5Protection skirt
6Transport deposit
7Bow
8Ventilation grid
9Silencer grid
10 Oil surge tank hydrostat
11 Gearbox fan
12 Unlocking drive
13 Ejection rubber
14 Mower deck
15 Fuel valve

Control elements
17
Control elements
Front area
123
Fig.10:
Differential lock (1)
You actuate the differential lock with the left foot pedal.
Pedal depressed:
Differential lock on
Pedal not depressed:
Differential lock off
Fuel valve (2)
1
2
1: Open
2: Closed
Brake pedal/parking brake (3)
When you actuate the right foot pedal, the parking brake is
applied. Press the foot pedal only in exceptional situations
because the device stops abruptly.
Brakes:
Release the drive lever and press
the right foot pedal (3) down.
Control lever at seat
3 7
5 6 8
2
1
4
Fig.11:
Blade clutch lever (1)
The engine clutch lever is a guard device. When you disen-
gage the blade, the blade comes to a standstill within5
seconds.
Disengaging blade:
Turn the accelerator lever to MIN.
Move the blade clutch lever back.
Engaging blade:
Pull the lever slowly forward.
Cutting height adjustment (2)
The cutting height of the lawn can be
set to 5 positions.
The top position is the transport pos-
ition.
Seating position (3)
Press the lever (3) to the right, move the seat to the desired
position lock the seat in position.

Control elements
18
Ignition lock(4)
The ignition lock has three positions.
OFF: Ignition off.
The key can be removed.
ON: Ignition on.
START: Electric starter on.
Drive lever with parking brake (5)
The drive lever is required for moving the device forward, re-
versing as well as stopping the device. The further you move
the lever in one or the other direction, the faster the device
moves.
In the neutral position, the parking brake is active.
P
Reversing
Stopping (neutral position/parking
brake)
Moving forward
Accelerator lever with choke (6)
With the accelerator lever, you can change the engine
speed and thus control the engine output. When you start
the device when the engine is cold, move the accelerator
lever to choke position (choke is closed).
MIN: Idling speed. Pull the acceler-
ator lever all the way up.
MAX: Full throttle position
Choke: Choke closed (only for en-
gine start when engine is cold).
Press the accelerator lever all the
way down.
Seat springing (7)
The seat springing can be adjusted to the driver’s weight.
Heavy driver: Turn clockwise
Light driver: Turn anti-clockwise
Operating hours counter (8)
The operating hours are counted as soon as the engine is
running.
Display:
– When engine is running: engine speed
– When engine is off: operating hours
Drive/idle mode
To push the device without engine drive, unlock the drive at
the rear of the device and release the parking break.
2
1
Fig.12:
Fig.13:
1: = Locked
2: = Unlocked (idle speed)

Information on mowing
19
Bar
1
2
Putting down the bar
1. Pull out the lever(1).
2. Put down the bar(2).
3. Swivel the lever forwards and engage the lever.
Putting up the bar
1. Pull out the lever(1).
2. Put up the bar(2).
3. Swivel the lever down and engage the lever.
Information on mowing
Prior to mowing, check your device for completeness, proper
functioning, and cleanliness. A dirty ventilation grid causes
overheating of the engine, this can damage the engine. A
dirty protective grid at the silencer poses a fire hazard.
Frequent engagement and disengagement of the clutch in-
creases wear of the blade drive belt and the blade brake. Es-
pecially in case of high grass, clutch engagement leads to
overload.
To keep the area well maintained, mow frequently and keep
the grass short.
Only mow with a sharp and undamaged blade. Have the
blade sharpened and balanced regularly (by authorised ser-
vice centre).
Do not mow when the grass is wet or when it is raining. The
turf may be damaged and there is a danger of slipping!
Turn the device around only in already mown sections. Do
not leave the device unattended while the engine is running.
Set the cutting height so that the blade does not touch the
ground even in case of terrain unevenness.
Always set the blade to transport position when you do not
mow.
For mowing, always turn the accelerator lever to full throttle
to achieve the best mowing performance.
To avoid blockage during the ejection of grass, we recom-
mend, for flat terrain, to proceed according to the mowing
patterns. Mulch is shredded into much smaller pieces when
you mow the terrain once again in the opposite direction.

Prior to starting
20
Prior to starting
Checking the oil level
Notice
Incorrect oil level can damage the engine.
► Prior to each use, check the engine oil level and the oil
level in the hydrostat (see Maintenance).
Observe the information in the operator’s manual of the en-
gine manufacturer.
Fuel
Fur fuel, use lead-free gas (see operating instructions of the
engine manufacturer).
You can use E10 fuel. Do not store E10 fuel longer than 30
days.
Do not use E85 fuel. The fuel must contain less than 10 %
ethanol.
Tanking up
Warning
Fuel is ignited by hot engine parts.
► Prior to filling up, switch off the engine and wait for at
least 20minutes until the engine has cooled down. Ob-
serve the safety instructions regarding the fuel!
Filling up with fuel
1. For filling, use a canister with filler spout or a funnel.
2. Open the canister carefully so that existing excess pres-
sure is slowly reduced.
3. Open the tank cap carefully so that fuel does not splash
out.
4. Fill the fuel tank.
5. Close the tank cap until you hear three clicks.
Adjusting the seating position
Adjust the seat in the longitudinal direction until your feet are
positioned on the inclined support plates and you sit comfort-
ably.
Adjusting the seat suspension
To provide the ultimate seating comfort, spring deflection
should be fully utilized, if possible. Adjust the handwheel so
that the seat does not contact the frame during normal opera-
tion.
Putting up the bar
For safety reasons, always use the device with the bar folded
up and locked. If the device tips over, the bar can prevent the
device from overturning. Serious damage to the device can
be thus avoided.
The device may only be used with the bar folded down on
level ground.
Transport rack
Warning
During loading there is an increased risk of tipping.
► Do not move on steep slopes when the transport rack is
loaded. Pay attention to the admissible loading limits.
The device has a transport rack above the engine cover.
Notice
There is a hazard due to incorrect loading that the engine
overheats and is damaged.
► Only load the transport rack so that the ventilation grid
that is located below it is not covered.
Beware! Only load the transport rack so that the ventilation
grid that is located below it is not covered. Otherwise there is
a danger that the engine overheats and is damaged.
Loading limits
Maximum load: 11in (5kg)
Maximum height: 7,1in (18cm)
Maximum width: 17,7in (45cm)
Maximum length: 11.8in (30cm)