Ashley ASH3809B User manual

SAFETY INFORMATION
INSTALLATION GUIDE FOR ASH3809B and ASH3809B1
Released Date: 2020-12-09
Fixture Body
x 1
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance email [email protected].
PACKAGE CONTENTS
MOUNTING HARDWARE
A
Inner Backplate
x 1
AA Mounting Screw
x 2
BB Outlet Box Screw
x 2
DD
Wire Connector
x 3
CC
- 1 -
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED

1
Green ground screw
2
Black (or red) wire from supply
Ground wire from supply
White from fixture
Black from fixture
Ground wire
from fixture
White wire from supply
3
Rectangle/Square Backplate Round Backplate
5
Apply Caulking (Backplate shape is varies depends on items purchased)
*Note: Do NOT caulk the bottom of the backplate to allow moisture to escape.
WiringInstall Inner Backplate
Install Fixture Body
4
Install Bulb
Exterior Caulk Exterior Caulk
Exterior Caulk
Exterior Caulk
Exterior Caulk
Exterior Caulk
Your installation is now complete! Restore electricity and save this sheet for future reference.
INSTALLATION
- 2 -
Install one correct bulb referring to fixture markings and/or labels for
maximum wattage.
Recommended Bulb type (not included):
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX

1
Remove Cage
HOW TO REPLACE GLASS PANEL
- 3 -
2
Remove Glass Holder
3
Remove Glass Panel
4
Install New Glass Panel
5
Install Glass Holder
6
Install Cage