
1211
ASSEMBLY ASAMBLEA ASSEMBLY ASAMBLEA
INSTALLING THE BATTERIES
INSTALACIÓN DE PILAS
6) • Remove the baery cover using a Philips
baeries and replace the baery cover.
Do not overghten the screw.
•
la cubierta de las pilas (Fig. 6). Instale dos
INSTALLING MUSIC/VIBRATION UNIT
INSTALACIÓN DE LA UNIDAD DE MÚSICA/
VIBRACIÓN
7) • Align the mounng groove on the unit to
the corresponding slot on Footrest wire.
Slide the unit onto the mounng groove
unl it is securely in place
(Fig. 7).
• Alinee la ranura de montaje de la unidad
con la ranura correspondiente del
alambre del apoyapiés. Deslice la unidad
bien sujeta (Fig. 7).
Fig. 6
Fig. 7